ANDRITZ Recycling Technology Center - ANDRITZ Group products

Destroyer is a slow rotating pre-shredder with electric drive and hydraulic pendulum feeder, with low energy consumption. The pendulum feeds the material against the rotor, equipped with fixed teeth that cut the material fixed against anvil steels. Final fraction is regulated by the integrated screen, 50-400 mm. The feeder, is operated by a last generation hydraulic system with variable displacementpump.

Rambo is are high speed swing hammer mills with high precision. The material is loaded into the vibrating table which distributes the material to a uniform and efficient feed. Feed rollers flatten and push the material into the mill, where the rotor grinds the material, consisting of swinging hammers in a closed maze.

Phantom is a medium-speed shredder with electric drive and hydraulic pendulum feeder, with low energy consumption. The pendulum feeds the material against the rotor, equipped with fixed teeth that cut the material fixed against anvil steels. The feeder, is operated by a last generation hydraulic system with variable displacementpump. The process is set from software in the PLC.

FRP is a single shaft shredder with medium speed, it is electrical and a has a pendular hydraulic pusher. The pusher presses the material against the rotor, equipped with fixed teeth that shred the material against anvils. The hydraulic pusher is driven by a hydraulic pump with a last generation proportional valve. The whole process is programmed in Franssons software in the PLC.

FRP is a single shaft shredder with medium speed, it is electrical and a has a pendular hydraulic pusher. The pusher presses the material against the rotor, equipped with fixed teeth that shred the material against anvils. The hydraulic pusher is driven by a hydraulic pump with a last generation proportional valve. The whole process is programmed in Franssons software in the PLC.

FRP is a single shaft shredder with medium speed, it is electrical and a has a pendular hydraulic pusher. The pusher presses the material against the rotor, equipped with fixed teeth that shred the material against anvils. The hydraulic pusher is driven by a hydraulic pump with a last generation proportional valve. The whole process is programmed in Franssons software in the PLC.

Tube shredder is a single shaft shredder with medium speed, it is electrical and a has a pendular hydraulic pusher and a hydraulic table Autocharger that feeds the tubes into the rotor. The pusher presses the material against the rotor, equipped with fixed teeth that shred the material against anvils. The whole process is programmed in Franssons software in the PLC.

HK-Air is a fixed hammer mill which obtains fine grain. In its milling system it has an internal fan, which makes the system more efficient, grinding with a more uniform result. It also allows us to pneumatically conveying material obviating the need for an additional fan.

HK-Green is a fixed hammer mill which obtains fine fractions. In its milling system it has an internal fan, which makes the system more efficient, grinding with a more uniform result. The large flow of positive pressure air, prevents clogging of the screen from green or humid materials.

Schredder equipped with two axes comminuted materials with a system of rotary shear that grinds against shaft axis , the different types of blades are intended to get different grain sizes with different materials.