3 products found

Artec Testnology products

C-Therm - Thermal Conductivity & Thermal Effusivity

Thermal Conductivity Range: 0.01 to 500 W/mK Thermal Diffusivity Range: 0.01 to 300mm²/s System includes: - Trident Thermal Property Analyzer Electronic Control Unit - Standard Laptop w/ Windows 10® Operating System - Small Volume Test Cell - Pelican™ Transport Case - C-Therm TC3™ Software License Modified Transient Plane Source 1 × MTPS Sensor - Thermal Conductivity: 0.01 to 500 W/mK (Max-k) - Temperature: -50ºC to 200ºC (option for up to 500ºC) - Samples: Solids, Liquids, Powders, Pastes Transient Plane Source 3 × Flex TPS (hot disc) Kapton based sensors - Thermal Conductivity: 0.03 to 500 W/mK - Temperature: -50ºC to 80ºC (option for up to 300ºC) - Modules: Bulk, Slab, Anisotropy Transient Line Source 1 × 150mm TLS Needle Probe - Thermal Conductivity: 0.1 to 6 W/mK - Temperature: -55ºC to 200ºC - Samples: Viscous liquids, Aggregates, Unconsolidated Solids, Polymer Melts Environmental control chamber sold separately.

C-Therm - Thermal Effusivity analyser

Quantify the warm/cool sensation of textiles and fabrics via ASTM D7984 The C-Therm Tx employs the patented Modified Transient Plane Source (MTPS) technique. The one-sided, interfacial heat reflectance sensor applies a momentary constant heat source to the sample. Thermal conductivity and effusivity are measured directly, providing a detailed overview of the thermal characteristics of the sample.

James Heal - Colour fastness to light

TruFade is used to test the light fastness of textiles, leather and other materials, simplifying a difficult area of colour fastness testing to deliver consistent and accurate results. KEY BENEFITS: - Intuitive, simple touchscreen software with pre-loaded standards. Minimal operator training is needed - learn to operate in just minutes. - TruFade conforms to ISO, AATCC, Adidas, Decathlon, M&S, IUF and SLF standards and test methods. - Now with onboard weathering for a range of testing, including AATCC 169 and ISO 105-B04. - Tri-sided specimen holders increase the usable exposure space to up to 1640cm2. - Easy access allows the specimens to be loaded in just a few seconds at a height ideal for most users. - Exceptionally easy to use. Can be operated with minimal training, saving time and reducing the potential for operator error. - TruFade can be plumbed into your water conditioning system or easily filled in the large capacity reservoir.