BAP Equipment Ltd. products

One-Piece Augers are forged and welded by hand in the Netherlands. These durable steel Augers are built with Eijkelkamp ingenuity and craftsmanship. Versatile, lightweight hand Augers are easy to carry, require no assembly in the field and work well in all types of soil. The one-piece welded construction won’t come apart during use and works best at depths of up to 3`. The standard onepiece crossbar handle is welded to the steel shaft, which is then welded to the Auger at the bottom. These durable steel Augers are built with Eijkelkamp ingenuity and craftsmanship. Versatile, lightweight hand Augers are easy to carry, require no assembly in the field and work well in all types of soil. The one-piece welded construction won’t come apart during use and works best at depths of up to 3`. The standard onepiece crossbar handle is welded to the steel shaft, which is then welded to the 2 -3/4" diameter auger at the bottom. PRICE $189.00

Two-piece Auger Systems are made up of the Handle,and a Bottom Auger section. An additional extension section is also available for sampling to lower depths.The two sections are connected with a bayonet-style connection. Bayonet-Style Connection With the bayonet-style, the two parts to be joined (top and bottom of auger, or extension rods) are clamped into each other, then a coupling sleeve is pushed down to lock the connection. The bayonet-style provides a quick coupling without the use of tools, and there is no jamming of the connection even under adverse working conditions. Price $125.00

Two-piece Auger Systems are made up of the Handle,and a Bottom Auger section.An additional extension section is also available for lower depths.They are connected with a bayonet-style connection. The Combination Auger Section type gets a reasonably good hold of sandy material while more cohesive muds and clay soils can be fairly easily removed from the auger body. The bits of Edelman Combination Augers are made of durable, hand-forged steel, that help to prevent the contamination of the soil samples. PRICE$235.00

Two-piece Auger Systems are made up of the Handle,and a Bottom Auger section.An additional extension section is also available for lower depths.They are connected with a bayonet-style connection. The Auger body consists of an iron tube with two sharp bits at the base and a bow bracket on the top connecting to a rod. The diameter of the bits is slightly larger than that of the tube, so friction between the soil and tube is minimized. The Riverside Auger eats itself into the soil when it is pushed downward and rotated clockwise. Because of its closed sides, this style is not recommended for wet, cohesive soils. It works best in hard and brittle soils, such as very dry clays, stiff loamy soils and soils mixed with fine gravel, both above and below the groundwater PRICE $285.00

Two-piece Auger Systems are made up of the Handle,and a Bottom Auger section.An additional extension section is also available for lower depths.They are connected with a bayonet-style connection. These augers are for use in stony soils that are heavy, rigid and very strong. The heavy steel construction of the Stony Soil Auger enables it to capture stones and allow lighter material to also remain in the Auger. PRICE $ 285.00

The Prospector, GeoPro Vest is our newest design.This vest is the result of input from individuals working in the Geology and Exploration industries. It is the most versatile field exploration vest on the market today. PRICE $185.00