Cadoppi S.r.l. products

This series of centrifugal pumps multi-stage, CS-P are manufactured with axial suction and with a rubust support, seat of oil-lubricated bearings which drive the trasmission shaft. This technologically advanced solution has been designed to allow the construction of the multi-stage in a modular way.

This series of centrifugal pumps single-stage, CS-M are manufactured with axial suction and with a rubust support, seat of oil-lubricated bearings which drive the trasmission shaft.

This series CA of pumps is suitable for coupling to tractors with power from 10 to 200 hp, through a cardan shaft. They can be used for irrigation with rainers or sprinklers mobile irrigation hose-reels and sliding irrigation systems. They are completely made of cast iron, with steel shaft The gear box is oil lubricated. These pumps can be classified as: - Centrifugal, low head, for clean waters - Centrifugal, middle head, for clean waters - Centrifugal high head, for clean waters Pumps mounted on a 2 wheel trailer Pumps mounted on a base provided with a three point coupling.

This series CA of pumps is suitable for coupling to tractors with power from 10 to 200 hp, through a cardan shaft. They can be used for irrigation with rainers or sprinklers mobile irrigation hose-reels and sliding irrigation systems. They are completely made of cast iron, with steel shaft The gear box is oil lubricated. These pumps can be classified as: - Self-priming, low head, for dirty waters - Self-priming,l high head, for dirty waters Pumps mounted on a 2 wheel trailer Pumps mounted on a base provided with a three point coupling.

These pumps CF, self-priming, single stage and multi stage are the feather in Cadoppi`s cap. No other manufacturer of similar pumps in the world is able to offer all the different flange arrangements for any kind of diesel, gasoline or mixture engine. As a matter of fact Cadoppi srl may provide the possibility to couple its pumps both to engine with "SAE" International standard flanges, and to engine with special type of flange. The pumps cover the low, middle and high head requirements. They can work with clean or dirty water for irrigation, dewatering, fire fighting or water supply. - Power up to 250 Kw - This type of direct pump/engine coupling, not only makes the assembling of the motorpumps quicker and easier, but also guarantees a perfect shaft alignment.

These pumps CFA, centrifugal, single stage and multi stage are the feather in Cadoppi`s cap. No other manufacturer of similar pumps in the world is able to offer all the different flange arrangements for any kind of diesel, gasoline or mixture engine. As a matter of fact Cadoppi srl may provide the possibility to couple its pumps both to engine with "SAE" International standard flanges, and to engine with special type of flange. The pumps cover the low, middle and high head requirements. They can work with clean or dirty water for irrigation, dewatering, fire fighting or water supply. - Power up to 250 Kw - This type of direct pump/engine coupling, not only makes the assembling of the motorpumps quicker and easier, but also guarantees a perfect shaft alignment.

4" Peripheral submersible electric pump, starting box with built-in capacitor, built-in motor protector. For 4" wells - Pumping of clean water - Farms and cottages - Water handling in fountains - Rain irrigation - Feeding of pressure systems - Tanks filling emptying.

Screw electric pump always ready to use, incorporated capacitor built-in motor protector.

For handiling clear water with non abrasive parts and fluid non-chemical agressive - Feeding pressure systems - Tanks filing and emptying - For boosting insufficient mai water pressure.

For handling clear water with non abrasive parts and fluid non-chemical agressive - Feeding pressure systems - Tanks filing and emptying - For boosting insufficient main water pressure.