Campbell Scientific, Inc.
Refine by
Families
- Air Temperature Sensors
- Air Temperature and Relative Humidity Sensors
- All-in-One Weather Sensors
- Barometric Pressure Sensors
- Ceilometers
- Digital Cameras
- Electrical Current Sensors
- Evaporation Gauges
- Heat, Water Vapor, and Carbon Dioxide Flux Sensors
- Leaf Wetness Sensors
- pH Sensors
- Precipitation Sensors
- Present Weather Sensors
- Snow Water Equivalent/Snow Depth Sensors
- Soil Heat Flux Sensors
- Soil Moisture, Temperature, and EC Sensors
- Soil Temperature Sensors
- Solar Radiation Sensors
- Turbidity Sensors
- Visibility Sensors
- Water Conductivity Sensors
- Water Level, Stage, and Flow Sensors
- Water Temperature Sensors
- Wind Speed and Wind Direction Sensors
- Flood Warning Systems (ALERT/ALERT2)
- GRANITE Data Acquisition System
- Solar Energy Monitoring
- Wind Energy Monitoring
- Hydrological Monitoring
- Sensors - Barometric Pressure Sensors
- Sensors - Ceilometers
- Sensors - Freezing-Rain and Ice Detectors
- Sensors - pH Sensors
- Data Loggers
- Wi-Fi Communications
- Narrow-band UHF/VHF Radios
- Ethernet Communications
124 products found
Campbell Scientific, Inc. products
Campbell Scientific - Electric Field Meter
The CS110 is used for lightning warning applications and in research applications for measuring the local electric field. It measures the vertical component of the atmospheric electric field at the earth's surface. The CS110 sensor is typically part of a larger electric-field system. It includes an integrated CR1000 datalogger, and so can be expanded with the addition of other sensors and peripherals. Note: For a complete system that uses the CS110 Electric Field Meter Sensor, refer to the LW110 Lightning Warning System page.
Texas Electronics - Rain Gage with 6 in. Orifice
The TE525, manufactured by Texas Electronics, has a 6 in. orifice and measures rainfall in 0.01 in. increments. It is compatible with all Campbell Scientific data loggers, and it is widely used in environmental monitoring applications.
Texas Electronics - Rain Gage with 24.5 cm Orifice
The TE525MM, manufactured by Texas Electronics, is a tipping bucket rain gage that monitors rainfall in metric rather than US units. It measures in 0.1 mm increments and has a 24.5 cm funnel. This tipping bucket is compatible with all Campbell Scientific data loggers, and is widely used in environmental monitoring applications.
Texas Electronics - Rain Gage with 8 in. Orifice
The TE525WS, manufactured by Texas Electronics, is a tipping bucket rain gage that conforms to the National Weather Service recommendation for an 8 in. funnel orifice. It measures rainfall in 0.01 in. increments. This tipping bucket is compatible with all Campbell Scientific data loggers, and it is widely used in environmental monitoring applications.
Campbell Scientific - DataView II Display
The CD295 is a two-line, 32-character LCD for use with PakBus data loggers. It displays one real-time value, a description, and units. The CD295 is mounted in an enclosure lid, allowing you to view data on site without opening the enclosure. PC295 software is included for entering descriptions, choosing units, and specifying up to 30 public variables to display. Two buttons on the CD295 are for scrolling through the specified values. The CD294 is a similar display that is supports mixed-array data loggers.
Campbell Scientific - Phone Modem
The COM220 phone modem enables communications between a computer and a Campbell Scientific data logger over a public switched telephone network. A Hayes-compatible modem is required at the computer site. The COM220 connects to the data logger at the field site. Most Campbell Scientific data loggers are compatible.
Campbell Scientific - Keyboard/Display for CR1000(X), CR800, or CR6
The CR1000KD is a portable keyboard and display screen for our data loggers that have a CS I/O port, including the CR1000, CR1000X, CR800, CR850, and CR6. It allows you to check the data logger's status, display or plot sensor readings and stored values, and enter numeric data or change port/flag state. One CR1000KD may be carried from station to station in a data logger network.
Campbell Scientific - RS-485 Multidrop Interface
The MD485 is an intelligent RS-485 interface that permits a PC to address and communicate with one or more data loggers over a distance of up to 1200 m. This interface also supports data-logger-to-data-logger communication, callback from a remote data logger, PC-to-printer communications, and digital camera-to-data-logger connections.
Campbell Scientific - Network Link Interface
The NL201 is a serial-to-Ethernet interface that provides a wired Ethernet network connection to data loggers, peripherals, and other serial devices. The NL201 supports sophisticated networking capabilities for PakBus devices and networks. Using a unique technique to bridge the Ethernet and CS I/O ports, the NL201 can provide direct access to the integrated IP functionality of some Campbell Scientific data loggers. The NL201 can also act as a standard TCP serial server, serial client, Modbus TCP/IP gateway, and TLS proxy server for HTTPS and user-defined-port communication.