Cerex Monitoring Solutions, LLC.

29 products found

Cerex Monitoring Solutions, LLC. Products

  • Open-Path Multi-Gas Analyzers: UV DOAS and FTIR

    Applications: Continuous Perimeter Monitoring, Fugitive Emissions Monitoring, Source Monitoring, Leak Detection, Release and Hazmat Response.

  • Cerex AirSentry - Model FTIR - Open Path Multi-Gas Analyzer

    Cerex AirSentry - Model FTIR - Open Path Multi-Gas Analyzer

    The Cerex AirSentry FTIR multi-gas analyzer is the recognized choice in open path FTIR and the most reliable for monitoring industrial facilities, accidental releases, and hazardous waste site emissions. The system monitors from 5 to 1,000 meters and eliminates the need for many single point gas specific sensors, lengthy calibrations, and laboratory analysis. The Cerex AirSentry FTIR is the only commercial open-path FTIR evaluated in two USEPA site...

  • Cerex - Model UV Sentry - Open Path Multi-Gas Analyzers

    Cerex - Model UV Sentry - Open Path Multi-Gas Analyzers

    The Cerex UV Sentry Open Path Multi-gas Analyzer sets the industry standard for time-resolved, gap-less fugitive emissions and chemical emergency monitoring across fencelines, around process units and around tank farms.

  • Portable Point Analyzers: UVDOAS and FTIR

    Applications: Industrial Hygiene Monitoring, Leak Detection, Ambient Air Monitoring, Hazmat and Release Response Monitoring, Indoor Air Quality

  • Cerex - Model UV Hound Series - Portable UVDOAS Multi-gas Analyzers

    Cerex - Model UV Hound Series - Portable UVDOAS Multi-gas Analyzers

    The Cerex Hound series point gas detectors are portable multi-gas analyzers developed to detect part-per-billion (ppb) to percent level concentrations of multiple gases within a mixture. The Hound produces laboratory quality results in real-time using ultraviolet light absorption – similar to traditional infrared detectors, but features lower detection limits on many human health hazards and does not interfere with water vapor. All Hound...

  • Cerex - Model MiniHound Series - Portable Multi-Gas Analyzer

    Cerex - Model MiniHound Series - Portable Multi-Gas Analyzer

    The Cerex MiniHound series point gas detectors are portable multi-gas analyzers developed to detect part-per-billion (ppb) to percent level concentrations of multiple gases within a mixture. The MiniHound produces laboratory quality results in real-time using ultraviolet light absorption – similar to traditional infrared detectors, but features lower detection limits on many human health hazards and does not interfere with water vapor. All...

  • Fixed Mount Point Analyzer

  • Cerex - Model UV 3000C - Fixed Mount Multi-Gas Analyzer System

    Cerex - Model UV 3000C - Fixed Mount Multi-Gas Analyzer System

    The Cerex UV 3000C is a fixed mount multi-gas analyzer with internal sample cell. Available with an integrated twelve port multiplexer, the UV 3000C offers sequential zone monitoring of up to ten locations for leak detection, process monitoring or indoor air quality monitoring. Two ports are generally reserved for operator specified quality assurance audits. Continuous parallel sample acquisition reduces latency and for many applications the sample...

  • CEMs / Stack Analyzers

    Applications: Insitu CEMs, Insitu Process Monitoring, Insitu Tailgas, Insitu Ammonia Slip, Insitu DeNOx/SCR and DeSOx/FGD.

  • Cerex - Model FT5000+ - Continuous Emissions Monitor

    Cerex - Model FT5000+ - Continuous Emissions Monitor

    Dual channel FTIR / UVDOAS Cross Stack Multi-gas CEM Analyzer. The Cerex FT5000+ is a fixed Continuous Emissions Monitor for cross stack or process applications. The system is based on proven FTIR and UVDOAS technology. The FT 5000 Plus analyzer provides real-time multi-gas qualification and quantification of gases commonly found in stack emissions. The FT5000+ features simultaneous dual channel UVDOAS and FTIR operation, allowing for monitoring of...

  • Cerex - Model UV3000P - UVDOAS Multi-Gas Internal Cell Analyzers

    Cerex - Model UV3000P - UVDOAS Multi-Gas Internal Cell Analyzers

    Insitu DeSOX, DeNOx – Ammonia Slip, General CEMs; The Cerex UV3000P is a fixed mount insitu multi-gas analyzer with a flange adapted probe. Gas concentration measurements are made directly within the stack gas stream. There is no loss of water soluble compounds. Available with two ports for operator specified quality assurance audits, integrated stack temperature and humidity monitoring, and wired or wireless remote...

  • Cerex - Model FT5000 CEM - Multi‐Gas FTIR Cross Stack Analyzer

    Cerex - Model FT5000 CEM - Multi‐Gas FTIR Cross Stack Analyzer

    The Cerex FT5000 is a portable Continuous Emissions Monitor for cross stack applications. The system is based on proven FTIR and DOAS technology. The FT5000 analyzer provides real-time multi-gas qualification and quantification of gases commonly found in stack emissions. The FT5000 can also serve as a reliable alarm and easily integrates into your existing alarm system.

  • Cerex - Model FT5000P - Insitu Probe CEM Stack Analyzer - Multi-Gas FTIR Stack Analzyer

    Cerex - Model FT5000P - Insitu Probe CEM Stack Analyzer - Multi-Gas FTIR Stack Analzyer

    The Cerex FT5000P is a fixed Continuous Emissions Monitor for applications requiring a stack or process probe. The FT5000 P analyzer provides real-time multi-gas qualification and quantification of gases commonly found in stack emissions. Multiple detector options and probe lengths are avaialble to meet the exact requirements of the installation.

  • Cerex - Model UV 3000H - Air Quality Mobile Laboratory Multifunction Analyzer

    Cerex - Model UV 3000H - Air Quality Mobile Laboratory Multifunction Analyzer

    Cerex UV 3000H model analyzers are in use worldwide in process monitoring, indoor air quality, and mobile air quality laboratory applications. Available with a deuterium or xenon UV source, the UV3000H features outstanding flexibility and is available with a range of fiber coupled cells, custom cross process adapters, insitu mono-static probe, and external telescopes to allow ambient monitoring, closed cell process monitoring, and insitu process...

  • Process Analyzers

    Applications: Insitu, Extractive and Parallel Stream Process Monitoring, Ambient Air Monitoring, Mobile and Benchtop Laboratory Gas Monitoring

  • Cerex - Model UV 3000 F - Multi-Gas Process Analyzers

    Cerex - Model UV 3000 F - Multi-Gas Process Analyzers

    Cerex UV 3000 F model analyzers are in use worldwide in process monitoring, indoor air quality, and mobile air quality laboratory applications. The UV3000 F features outstanding flexibility and is available with a range of fiber coupled cells, custom cross process adapters, and insitu mono-static probes. It is ideal for laboratory setups as well as closed cell process monitoring, and insitu process monitoring.

  • Cerex - Model UV 3000 XF - Environment Monitoring Analyzers

    Cerex - Model UV 3000 XF - Environment Monitoring Analyzers

    Cerex UV 3000 XF model analyzers are in use worldwide in laboratory, mobile, and process air quality applications. The UV3000 XF series features outstanding flexibility and is well suited for a range of custom applications. Its fiber coupled cell options offer a vast range of detection limits while simultaneously ensuring separation of the main unit from the various hazards of corrosive or explosive environment monitoring.

  • Sampling Tools

  • Cerex - Model SPP100 - Gas Sample Conditioner

    Cerex - Model SPP100 - Gas Sample Conditioner

    ETG permeation sample conditioning systems are designed to prepare hot gas sample streams for high flow, high performance gas monitoring applications. The ETG permeation system will remove particulates, mists & water vapor from a gas stream without the loss of analyte gasses.

  • Cerex - Model 1.0m - Gas Probes

    Cerex - Model 1.0m - Gas Probes

    For applications requiring lower detection limits, the 1.0m Gas Probe is the preferred choice. Its longer path length coupled with its small size produces detections in the most confining spaces.

  • Cerex - Mini Retroreflector

    Cerex - Mini Retroreflector

    Use this mini-retroreflector to help align and calibrate an open-path system or for general experimentation.

  • Cerex - Corner Cube Array

    Cerex - Corner Cube Array

    Cerex supplies portable corner cube arrays with 7, 30, and 60 elements. For long distance applications 90 and 120 element arrays are available for permanent installations. Arrays can have IR or UV coatings.

  • Cerex - Large Flat Mirrors

    Cerex - Large Flat Mirrors

    Cerex supplies large flat mirrors for guiding open-path beams through multiple rooms. These mirrors can be coated for UV or IR use.

  • Gas Cell

  • Cerex - Linear Gas Cells

    Cerex - Linear Gas Cells

    Cerex offers custom length linear cells for gas sampling. The cells can be fiber coupled or windowed for your application. We offer cell bodies made from glass, aluminum, or stainless steel.

  • Cerex - UV/IR Multi-Pass Cell

    Cerex - UV/IR Multi-Pass Cell

    Cerex offers multi-pass cells with 1m, 2m, 2.5m, 5m, 10m, 20m, and 30m path lengths for use with UV or IR. The cells can be fiber coupled or combined with transfer optics to mate to an existing system. We offer cell bodies made from glass or stainless steel.

  • Cerex - Corrosive Gas Multi-Pass Cell

    Cerex - Corrosive Gas Multi-Pass Cell

    Cerex offers a corrosive gas multi-pass cell with a 4.5m or 1.5m path length for use with the Cerex AirSentry FTIR. All cell body materials are designed to withstand corrosive gases such as HCl, HBr, and HF. The cell features an integrated temperature controller and heater.