Chemyx Inc articles

In connection with the development of mRNA-based vaccines against Coronavirus, lipid nanoparticles (LNPs) have shown to be a promising delivery form. Chemyx Fusion 4000 Syringe Pump and Fusion 4000 OEM Syringe Pump have demonstrated outstanding performance for small-scale production of vaccine lipid nanoparticles.

The Chemyx Fusion 6000-X High-Pressure Syringe Pump is an upgraded model of the Fusion 6000 High-Pressure Syringe Pump.

Please see the comparison chart of the NEW Fusion 6000-X High-Pressure Syringe Pump compared to the Fusion 6000 High-Pressure Syringe Pump.

Whenever new O-rings installed, or after frequent usage; the plunger on the stainless steel syringe may feel tight and cannot push/pull by hand. In this case, the syringe will need to be lubricated by following these steps:

1. Pull the plunger out of the syringe

A check valve is a valve that normally allows fluid (liquid or gas) to flow through it in only one direction. Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave.

Utilizing a check valve with a syringe, you can run a continuous cycle experiment at Chemyx Fusion 4000 syringe pump. See the picture below for the Fusion 4000 Indepe

Chemyx stainless steel syringes are used for high-pressure applications using the Fusion 6000 syringe pump and other Chemyx syringe pumps. Sometimes you will see the syringe leaks during the experiment.

If the leaking came from the fitting, do the following steps to fix it:

1. Use a wre

Laboratory Syringe Pumps

Laboratory syringe pumps are testing equipment for scientific research experiments. Lab syringe pumps are also used in industrial manufacturing processes. The dosing rate is controlled by a step motor inside the syringe pump.

A good example of the laboratory syringe pumps is the Chemyx Fusion 4000 and <

Nanoparticle as part of nanotechnology has already drawn attention to its great potential of enhancing oil recovery. In the last few years, some publications have already addressed this topic, but the basic enhanced oil recovery (EOR) mechanisms have not been released very clearly. A visualization flooding method (glass micromodel) will be used to investigate the EOR mechanisms of nanoparticle fluid in our lab in the future.

The developed microfluidic approach is a powerful mimetic mo

Introduction

Different applications require a pump, among all the options peristaltic and syringe pumps, are the most suitable. However, selection of the best is always a disjunctive. In general terms, laboratory and industrial process use peristaltic pumps. A user needs to know more about the systems and proper comparison of these technologies. In some cases is difficult to understand what are the fundamental differences between the pumps that a scientist can found i