CONBAR ep products

Specially designed with an inside diameter if 1 3/8` to allow for the passage of large solid particles during sampling of grease holding tanks. The clear tubing is easy to see through and the 1-foot markers show the depth of the submersion into the tank. When the unit is lowered into the liquid, the float valve opens, allowing the sample to flow in. Upon reaching the bottom, the unit is raised up and the valve closes, holding the sample inside. The mixture is then visible, showing the level of grease and liquid in the tank. The sampler is made of two 4-foot sections that screw together and can be purchased with additional 4` extension sections for sampling deeper tanks.

The NASCO Sludge Nabber makes sample collection of liquids fast and easy. It has an adjustable aluminum pole that extends from 4 to 6½, feet, making it easy to reach the liquid to be sampled and carried. The Sludge Nabber is ideally suited for numerous sampling requirements including chlorine in solution. Sample bottles of various sizes (250 ml to 1000 ml) are held in a polyurethane holder by a plastic snapper ring that has an adjustable locking device. Whether testing for chlorine, BOD (biochemical oxygen demand), or SS (suspended solids), the Sludge Nabber`s flexibility with holding various bottles, and its adjustable length, allows for effortless sampling. Unit is supplied with one 500-ml polyethylene bottle and one small snapper clamp. See accessories below.  

Save time and money by eliminating sampler cleaning costs and cross-contamination problems. Each sterilized sampler is individually wrapped and ready to use. The samplers are easy to use. To operate - push the sampler into the product, rotate handle to open sampler, allow a few seconds for the sampler to fill, rotate the handle closed and remove sample. Slide the inner rod out of the outer tube to remove the extracted sample.