Crimson Oil Tools Pvt. Ltd products

Crimson offers a complete range of Non Weld Bow spring Centralizers. Which are designed and manufactured as per API Spec 10D. Non Weld Bow centralizers are used to position the casing in the centre of the wellbore in vertical, deviated as well as horizontal wells.

CRIMSON Hinged Welded bow spring centralizer is designed with very low starting and running force while giving the substantial restoring force. These centralizers are designed to exceed the performance requirements of API Specification 10D for both starting and restoring forces. High-quality Bows made of special alloy steel with uniform hardness provide optimum performance.

Cement Float Collar: The using method is the same as float shoes except the lower end is pin Thread. It is connected with casing. High strength concrete for maximum resistance to circulating erosion, as well as bump and back pressures. The usage of the float collar is to make the casing landing easily by reducing the loading.

The Double Valve Float Shoe has all of the Features of The Standard Cement Float Shoe and Provides the added assurance of sealing when debris prevents the upper valve from closing. The nose area is designed with a combination of both concrete and aluminium.

CRIMSON has designed its plastic core and aluminium core cementing plug to Compliment its line of plugs to decrease drill out times. The cementing plug is used for separating the cement slurry from the mud .It can prevent the mud from blending into the cement slurry to influence the cementing quality.

The latch-down wiper plug and baffle may be used with most conventional floating equipment, but they are most commonly used in small-diameter tubing for inner-string cementing. The Wiper Plug with integrated Ball Seat and drill pipe darts is a liner wiper plug system designed to displace well fluids and cement both efficiently and accurately. The Liner Wiper Plug is attached to the Liner Hanger Setting Tool in the Liner. The Ball Seat is located in the Wiper Plug to build up pressure to the Liner running string for setting the Hydraulic Liner Hanger. When the Liner Hanger is set, the Ball Seat can be pumped out and is captured in a catcher at the bottom of the Liner Wiper Plug.

Applicable for horizontal and highly deviated well designs, the rigid centralizers center casing in previous run casings and can assist in aligning casings through well heads near surface. The straight blade centralizer can be attached to the casing with set screws located between each vane, preventing casing rotation or reciprocation during cementing operations. If the casing will be rotated or reciprocated during cementing operations, the Straight blade centralizer can float on the casing joint between the stop rings. A flexible ceramic coating can be applied to the entire turbulator to reduce friction. Crimson straight blade centralizers are wellhead friendly and have high impact with shock resistance, along with optimum tensile and yield strength.

Crimson Spiral Blade Solid Rigid Centralizer are designed to meet the needs for better cementing in high deviated and horizontal well.

Crimson Hinged bolted Stop Collar is Designed to latch on the casing pipe without having to be slipped on at the end of the casing pipe allowing  quick and easy installation. The friction grip type is hinged and incorporates a nut/bolt assembly which, when tightened, draws the stop collar into a friction grip around the circumference of the pipe. A valued point is that the stop collar should always have a stronger holding force than starting force.

Crimson Spiral Nail Stop Collar uses two spiral locking pins which when driven in firmly lock the collar into position around the casing.