Cypress Envirosystems products

The WPT-DB enables two set points to be programmed instead of one set point For example, heating could be programmed for 68° and cooling could be programmed for 78°, The thermostat would not call for heating or cooling when the ambient temperature is between these two setpoints, The thermostat would call for cooling when the ambient temperature rises above 78°, The thermostat would call for heating when the ambient temperature falls below 68°.

Legacy pneumatic thermostats generate no data, so building operators are blind to the issues that exist behind walls. The terminal units may have stuck actuators or the dampers may be oscillating, but no one knows because there is no information available. These problems often persist until a hot/cold call from an unhappy occupant triggers an investigation. SMARTPneumatics makes it possible for building engineers to know how each zone is performing on an ongoing basis and to prioritize maintenance work to ensure the best performance possible from the building.

Non-invasively retrofit analog pressure/temperature gauges for remote monitoring.Analog dial gauges which measure pressure, temperature and airflow are found in virtually every facility monitoring compressors, chillers, air handling units, coolant loops etc. In older buildings, gauges may be the only instrumentation available, and technicians are required to perform regular “rounds” with clipboard and pencil to log gauge data. It is a time consuming and error prone process.

Many facilities have mandates to reduce energy use (e.g. 5% reduction from prior year). Most unfortunately do not have any baseline data from prior years to compare to, and must install instrumentation and record the necessary data. This can be an expensive and time consuming exercise to install new transducers, run wires, create drawings, connect I/O panels, and configure software.

Gathers, stores, distributes, and presents wireless data, plus alarm notifications on excursions.The Cypress Envirosystems Blue Box Server (BBS) is an industrial server that collects data from Cypress Envirosystems field devices and enables access to data from a variety of users and interfaces.