Dewatering Enterprise Co., Ltd. products
AR Aeration
Model AR-001 - Fine Bubble Diffuser
Submerged fine bubble diffuser is used to provide high efficiency of air or oxygen conveyance into the wastewater/sludge, and agitate the wastewater to keep solids in suspension and mixing.
Model AR-002 - Jet Diffuser
Submerged jet diffuser is used to introduce air or oxygen into the wastewater/sludge, and agitate the wastewater to keep solids in suspension and mixing.
Model AR-003 - Submersible Jet Aerator
The jet aerator is designed to draw air in through a hollow tube/pipe and inject it underwater at high velocity and propeller action to create turbulence and diffuse air bubbles.
BL Blower
Model BL-001 - Rotary Blower
The rotor is bias rotated with the lobes going in and out inside the slots. The lobes are completely attached to the interior of casing surface with oil seal; therefore air is absorbed from the inlet and compressed out to the outlet.
Model BL-002 - Roots Blower
Features: Wide range of capacity, pressure and vacuum. Delivers completely oil-free air. Low oscillation and low noise by complete balancing. Small variance in capacity against pressure changes. High efficiency resulted from special profile. Simple structure, low maintenance requirement. High quality pilot and accurate gear applied. Long life and low noise assured.
Model BL-003 - Electromagnetic Blower
Electromagnetic blower is applicable for a small air capacity in household applications, industrial machinery attachments, oxygen supply for fish/fishery, medical & scientific apparatus, solder removal, wastewater treatment, septic tanks, and hospital applications.
FP Dewatering Equipment
Model FP-004 - ID Type Plate Filter Press
In the plate filter press, dewatering is accomplished by forcing the water from the sludge under high pressure. The sludge is pumped into the filter press chambers and the filtrate is pressed through the filter clothes as pumping pressure increases. The dewatered sludge is retained inside the press chambers and moved as the sludge cake after a press run.
Model FP-005 - HD Type Plate Filter Press
In the plate filter press, dewatering is accomplished by forcing the water from the sludge under high pressure. The sludge is pumped into the filter press chambers and the filtrate is pressed through the filter clothes as pumping pressure increases. The dewatered sludge is retained inside the press chambers and moved as the sludge cake after a press run.