EL-Cell GmbH products

Test Cells - Standard Test Cells

EL-CELL - Model PAT-Cell-Twin-Ref - Specialized PAT-Cell for Testing Simultaneously With Two Reference Electrodes

The PAT-Cell-TwinRef is a special version of the PAT-Cell supporting the use of a second reference electrode. This way you can simultaneously measure with two reference electrodes, for instance with LFP and LTO. Since both ring electrodes are arranged face-to-face, their SOC can be easily adjusted. Ability for conducting long-term half cell measurements with two reference electrodes. Compatible with any potentiostat or battery tester.

PAT Docking Stations

EL-CELL - Model PAT-Clamp-1 - Docking Station With Minimized Dimensions

The PAT-Clamp-1 is our smallest docking station for a single PAT test cell. It was developed for tight space constraints. The socket can be left connected permanently to a common potentiostat or battery tester using 2 mm banana sockets or Sub-D connector. Therefore there is no need to renew the connection between cell and potentiostat for every battery test. It also fits perfectly into any climate chamber with a cable feed-through and can be placed inside a glovebox. The cell is inserted and removed by bending up the clamp. The PAT-Clamp-1 allows immediate functional testing of all PAT series test cells with smallest possible footprint. Typically, it is used in combination with a high-throughput solution. For instance, 16 PAT-Cells can be cycled in parallel in a PAT-Chamber-16 connected by a third-party battery tester without impedance capability. In that case, the impedance of each test cell can be measured before and after the cycle test in the PAT-Clamp-1 connected to the PAT-Tester-x or another impedance analyzer.