Epoxytec International Inc. products

Epoxytec CPP Sprayliner is a two-component, spray-applied, 100% solids polycyclic amine epoxy. This liner is engineered as an ultra-high build, high-strength microfiber-reinforced polymer (FRP) applied liner. It is designed to protect against corrosion while sealing from inflow and infiltration (I&I). Epoxytec CPP Sprayliner is specifically designed for rehabilitation and lining of wastewater treatment plant (WWTP) structures and other large wall, open, or semi-open structures where high film strength and durability are required to deliver sealed barrier protection against hydrogen sulfide (H2S) and I&I.

Epoxytec CPP Sprayliner MH is a two-component, spray-applied, 100% solids polycyclic amine epoxy. This liner is engineered as an ultra-high build, high-strength microfiber-reinforced polymer (FRP) applied liner. It is designed to protect against corrosion while sealing from inflow and infiltration (I&I). Epoxytec CPP Sprayliner MH is specifically designed for rehabilitation and lining of sanitary sewer collection systems (sanitary sewer manholes, cylindrical lift stations, pipes) where high film strength and durability are required to deliver sealed barrier protection against hydrogen sulfide (H2S) and I&I. This is achieved by the product’s formulated balance of properties of high-strength, acid protection, and high surface acceptance to saturated surface dry (SSD) conditions with the ability to cure within high humidity environments.

Epoxytec CPP Sprayliner 61 is a two-component, spray-applied, 100% solids polycyclic amine epoxy. This liner is engineered as an ultra-high build, high-strength microfiber-reinforced polymer (FRP) applied liner. It is designed to protect against corrosion while sealing from inflow and infiltration (I&I). Epoxytec CPP Sprayliner 61™ is specifically designed for use in potable, drinking water environments (certified NSF/ANSI/ CAN Standard 61) where high film strength and durability are required to deliver sealed barrier protection against corrosion and I&I.

Epoxytec Mortartec Cladliner is a stand-alone epoxy-modified cement lining system. A highly advanced, formulated epoxy blend incorporating cutting-edge epoxide technology with proprietary engineered curing combined with a specific balance of Portland cement, high-density graded silica aggregate, and synthetic fibers. Once mixed, it results in a smooth mortar application and cures with suitable acid resistance to protect from corrosion derived from mild-to-moderate hydrogen sulfide (H2S) conditions. This coating is designed as a stand-alone system for moderate H2S environments (up to 100 ppm) and is great for protecting concrete, brick, masonry, sanitary sewer manholes, and wastewater system assets.

Epoxytec Mortartec Ceramico is a highly advanced, formulated epoxy blend incorporating cutting-edge epoxide technology with proprietary engineered curing combined with a specific balance of Portland cement, high-density graded silica aggregate, and synthetic fibers to produce one of the most coveted mortars in the industrial market today. Once mixed, it results in a smooth mortar application and cures with one of the hardest mortar surfaces in the industry. This coating is designed to take early topcoats of epoxy coatings without the need for further preparation. Mortartec Ceramico is industrial-grade and exhibits excellent performance properties with incredible adhesive properties and enhanced barrier sealing capabilities, assisting with minimizing outgassing.

Epoxytec Mortartec Silicate is an industrial-grade blend of Portland cement, graded silica sand, fibers, and microsilica. The mortar may be trowel- or spray-applied, typically from 1/2 inch to 2 inches (12.7 to 50.8 mm) in depth. Uses include repairing concrete or brick masonry, as a stand-alone mortar lining, or as an underlayment in the Epoxytec MH Composite Lining System for sewer manholes.

Epoxytec Uroseal 45V is a two-component, 100% solids, low durometer (45-55 Shore A) elastomeric sealant serving as a high-build elastomeric coating or joint sealing system for vertical and overhead use. Once cured, the material forms a high-quality sealant with 200% tensile elongation. Uroseal 45V is ideally suited for indoor and outdoor use on concrete, steel, and most construction materials. Uroseal 45V produces a flexible, longlasting film with excellent adhesion, cohesion, and elasticity that resists deterioration caused by weathering, stress, movement, water, oils, and most chemicals. The product is often used as a joint system in non-immersive vapor pits, dry wells, shafts, and sanitary sewer manholes.

Two-component polyamine penetrating epoxy primer and sealer for concrete. Designed to perform and bond to slightly damp, saturated surface dry (SSD) concrete to assist with an effective barrier in these conditions. SE-d Primecoat promotes sealing allowing subsequent early top coating, while facilitating in the mitigation of low moisture vapor transmission (MVT), outgassing, and chemical penetration. SE-d Primecoat’s low viscosity allows for deep penetration to form a suitably strong base for subsequent topcoats of grouts, mortars, and other coating and lining systems.

Epoxytec Uroflex 61 is a two component, high build 100% solids urethane-modified epoxy (UME) hybrid coating and/or linings system specifically designed for potable water storage environments. Uroflex 61 is a high build, self-leveling coating system incorporating a high degree of flexural modulus. Uroflex 61 is applicator friendly and easy to apply; conveniently produced as a one-to-one mix ratio by volume. Uroflex 61 is formulated as a hybrid urethane-modified epoxy (UME) enhancing its epoxy film flexibility and crosslinking for added protection. Uroflex 61 is designed to protect within immersive potable water environments requiring a semi-rigid protective film.