Erichsen GmbH & Co. KG products

The Lacquer and Paint Testing Machine, Model 200, is a bench-mounted unit with a cast iron machine body and a cylindrical test head. Model 200 is used for the ERICHSEN CUPPING TEST in accordance with DIN ISO 1520, ISO 1520, BS 3900 : Part E4, NF T 30-019 und SIS 18 41 77 on coated sheet metal, with a tensile strength of 400 N/mm², up to 1.25 mm thick and from 70 - 90 mm wide.

Lacquer and Paint Testing Machine, Model 202 EM, with electromotive drive, equipped with a laterally opened test head, test tool in accordance with DIN EN ISO 1520, electric installation for connecting the illumination of the microscope as well as a digital display for the acquisition of the ERICHSEN cupping value, with integrated preselection counter for setting the maximum cupping value required. The machine is operated via touch panel.

Fully automatic cupping and deep-draw testing machine for testing the ductility of coated ferrous and non-ferrous metals (such as coil coatings, painted, plastic-coated or galvanized materials). This testing machine is electro-hydraulically driven and has a maximum pulling force of 200 kN. This testing machine is equipped with digital displays for reading the drawing and blank holding force, as well as the drawing stamp travel. During the production of thermo-formed products, the materials are deformed along all three coordinate planes. In order to avoid any subsequent corrosion damage, the surface coating must not be damaged. The 242-Basic Model is well suited for using with sheet metal thickness ranging from 0.2 mm to 4.0 mm, for the standard inspections and verifications required for quality assurance.