Friess GmbH products

FRIESS vacuum Oil Dewatering Systems remove water, gases and dirt particles from hydraulic oils, turbine oils and other mineral oils. Even small amounts of water can cause considerable damage in hydraulic, lubricating or turbine oils: Oxidation in particular causes corrosion nests to form in lines and at the bottom of tanks, as well as unwanted rust particles that cause premature wear of sliding and sealing surfaces. In addition, vapor bubbles can form, which initiate cavitation and destruction of the pumps. The insulating effect of transformer and condenser oil is also significantly reduced.

Do you have very large basins and tanks where the fluid level vary considerably? Then we recommend the Friess Oil Skimmer S 100. Due to the design of the Model S 100, lifting heights of up to 20 m can be achieved while compensating for fluid level fluctuations of up to 2 m.

In case of large tanks with a width of 800 mm or more, our Friess Oil Skimmer W40 is the right choice. Floating oils in basins of different sizes are no longer a hurdle with FRIESS oil skimmers. Our Model W40 has been specially designed for basins with a width of 800 mm or more. The length of the basin can extend beyond 20 m.

Optimal for use in particularly narrow tanks with a width of 500 - 1000 mm. This model is shines when removing oil from very narrow basins with a width of 500 – 1000 mm. The length of the basin can be up to more than 10 m. In addition, it can operate at a head of up to 600 mm above the surface of the bath.

Your Oil Skimmer for oil removal in small emulsion tanks or degreasing plants. Basins with a surface of up to 1 m² are no problem for our FRIESS oil skimmer 1U. Even at a height of up to 600 mm above the tank surface, our system reliably removes floating oil.

Do you have oil in small emulsion tanks, cooling water basins or pump sumps? If the surface area is up to 1 m², the Model 1S from Friess can help. The special feature of the FRIESS oil skimmer 1S is the special guidance of the oil collector tube. This enables lifting heights of up to 10 m without the system losing its functionality.

Our Skimmer for standard containers in a small and narrow format. You do not need to remove oi from a lake or a huge basin? Instead you need a solution for your small and narrow tanks that is tailored to your needs? We also offer systems that are specifically designed for oil removal where there is less space in the tank. For example, the FRIESS oil skimmer Model BS.

Especially suitable for small, narrow tanks – The innovative Friess method for removing floating oil. Do you have a small, perhaps narrow container? In this case the FRIESS oil skimmer Model WBS will help you. As with all of our equipment, this system offers you our proven and in-house developed technology for removing floating oils in your various process fluids.

Never get your hands dirty again: Smart cleaning thanks to semi-automatic cleaning system. The cleaning process on this model is particularly practical. Unlike the ASMF, it is not fully automatic, but manual cleaning is very easy and convenient: only a few levers need to be operated. The clear advantage here is that the filter no longer needs to be opened. This saves you from dirty hands and at the same time minimizes the effort required for cleaning.

The fully automated solution from FRIESS: Strong magnetic pull and designed for a flow rate of up to 300 l/min. The FRIESS Magnetic Filter ASMF not only removes iron, steel and stainless steel particles from all kinds of process fluids, but can also clean itself. As a fully automated system, it therefore proves particularly useful at all locations where few personnel can be deployed.