GEOSER GEOSYNTHETIC A.Ş products

If geosynthetic clay and similar artificial impermeable materials are used in the storage base of the regular storage facility, it is also obligatory to provide a thickness of 50 cm. Article 16 of the existing Regulation 2. The soil impermeability layer is strengthened by Geomembrane (geomembrane) in Class I and Class II sanitary landfill facilities which provide the minimum permeability and thickness properties naturally.

GEOSER Geotextile felt is a previous textile product used in basic, floor, rock and earth materials. It is a fabric-like surface formed by combining much finer fibres with millimetres of needling and heat treatment. Produced as polyester. The most important feature of Geoser geotextile is the continuous surface which is used to separate two different types of floors. The fibre-containing structure of geotextile makes it possible to spread concentrated forces. It also acts as a reinforcement element and counteracts the tensile forces distributed in the groundmass. Geotextile filters can be used for pollution purposes due to their properties. While blocking the passage of solid particles, it remains permeable to liquid (water) and gas (air). Under certain conditions, these products can carry significant amounts of water along the surface, and may, therefore, behave in a draining condition. In short, geotextile has functioned at the hydraulic and mechanical level.

Geocell cellular fill systems are geosynthetic erosion control products produced from high-density polyethene. Its hollow structure and design allow for the use of different types of filling materials. Ground stabilization applications, green slope and erosion control applications, greenable retaining wall applications and concrete-aggregate filled canal construction.

GEOSER PE GEORIDES are geosynthetic materials with high strength, low creep, produced from high-density polyethene. Natural floors cause difficulties for applicators to bear weight and pressure. Geogrids come into play at this point and are used to strengthen the ground. Thus, it improves the ground conditions and increases the carrying capacity and makes it possible to work on the ground. Chemistry is especially acid and sulfite resistant. They are affected at a minimum level by adverse application conditions. They can be produced as single-sided geotextile or two-sided geotextile if desired. When the transport forces are requested, they can be increased up to 160 kN / m. UV resistant.

Geonet is made of polypropylene. Mainly used in projects such as highway, railway, soft ground strengthening and slope protection, soil strengthening, soil fill stabilization drainage.

Geosynthetic clay cover (GCL) material is produced by batch pinning method of placing bentonite material between braided and non-braided geotextiles. In general, the upper layer is non-woven geotextile and the lower layer is braided geotextile. However, in some cases, non-woven geotextiles can be used on both the top and the bottom. The material produced by this method is also called geocomposite. Geosynthetic clay is used to provide clay material impermeability.

Drainage Plate is insulation protection and drainage material produced from high-density polyethene (HDPE) raw materials. Between the floor and the structure, due to its protruding structure, creates air gaps, allowing the building to breathe and drain the water around the structure at the desired location. Provides protection against load and tightness caused by backfill by showing resistance by high strength. Easy to install and low cost.