Griltex Polska sp. z o.o. products

The GXP PLUS membrane made of high density polyethylene (HDPE), basis weight 400-1200 g/m², which is perfect at protecting, insulating and securing the underground sections of foundations and walls as well as eliminating the capillary rising of water.

The membrane GXP Plus 5+5, made from high density polyethylene (HDPE), owing to its structure of double embossings, ensures an increased friction angle of the ground on both sides. It is especially useful in areas with a high inclination angle, such as ditches, tanks, etc. and because of its two-side high ventilation capacity as an air gap between 2 concrete walls.

The geomembrane GXP Plus N10 made from high density polyethylene (HDPE) provides the optimal control of humidity and ventilation of covered surfaces of foundation walls, which is ensured by embossing with the compaction of over 3300 items/m² . It is especially useful in areas exposed to high ground pressures (e.g. deep foundations, access roads over underground garages).

The foil pressed from high density polyethylene (HDPE), combined with thermally welded polypropylene geotextile Typar SF, is assigned for mechanical protection and optimal drainage of foundation walls. The geocomposite GXP DREN is also perfectly fit for various applications in civil engineering (underground car parks, bridge abutments, terraces, foundations, retaining walls, etc.) as well as for drainage of building constructions.

GXP Dren 1200 Duo is a waterproof membrane extruded from high density polyethylene (HDPE), 1,2 mm thick, thermally joined with polyethylene geotextile made from continuous fibres 140 g/m² on the top side and polypropylene or polyester geotextile 250 gm² on the bottom side.

The DuPont TYPAR SF geotextile is a flat thermally joined and permeable geotextile made of 100% polypropylene continuous fibres. Its highest quality is ensured by a high initial modulus, high stretchability (over 50 %) as well as homogeneity, owing to which it is resistant to damage and demonstrates excellent filtration, separation, draining and protection properties. Typar is a textile with unique strength and a wide range of applications. It proves effective even under very hard conditions, in road construction, both on dry terrains and degraded areas.

Naptex is a non-woven geotextile, thermally welded, 100 % propylene. It is a material of a wide application range. Owing to an excellent combination of high initial modulus and high elongation (up to 50 %), as well as a unique structure, it demonstrates superlative mechanical properties in all directions.

Needle punched geotextiles are irreplaceable for ground stabilization, preventing material mixing as well as filtration and stabilization of the ground and the structure. The ones mostly used are polypropylene textiles (PP), as they are 2 to 6 times stronger than polyester geotextiles (PES).

Naptex 100 is a non-woven geotextile, produced by the method of needle punching, partially thermally hardened, made 100% from polypropylene. Owing to its properties, Naptex 100 characterizes in multifunctionality and has a wide range of applications, mostly for separation, filtration, reinforcement and stabilization of the ground.