Refine by
Companies Equipment & Supplies
56 equipment items found
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
The Dekati Smoking Machine is a versatile system for taking and diluting controlled puffs with adjustable volumes and profiles. Repeatable and adjustable puffs are important for characterizing and developing electronic cigarettes and other inhalable aerosol generators. The Dekati Smoking Machine is developed to allow real-time particle mass and size distribution measurements even from single ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
Dekati eFilter™ including one filter cassette and one real-time detection module installed in the device, eFilter charger with cable connection, USB-micro-USB cable for laptop connection, micro-SD memory card, calibration certificate and USB drive including eFilter user manual and virtual COM port ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
Used for charging and calibrating secondary flow for the real-time measurement ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
TSP Inlet for ambient air ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
PM10/PM2.5 inlets for ambient air measurements. EN 12341 PM10 inlet downscaled to 30 lpm. PM2.5 inlet, 30 ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
Set of 2 blocks, Set of 5 ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
eFilter filter cassette, 5 pcs. Filters not ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
EMFAB filter, TX40 (100 filters), Ø47 mm. Incl. 100 filters for gravimetric ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
Teflon filter (50 filters), 2 μm, Ø47 mm. Incl. 50 filters for gravimetric ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
PM10 inlet for ambient air measurements. EN 12341 PM10 inlet downscaled to 10 ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
Impactor probe coupling system angle 90 °. For connecting isokinetic nozzle (SAC-100) into impactor ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
Set incl. 11 pcs stainless steel sampling probes (3,45- 3,81-4,16-4,57-5,0-5,46-5,92-6,71-7,62-8,69-9,9 mm). Sampling probes can be directly connected into SAC-65 sampling cyclone inlet (R3/8") or IPR-500. Set includes also 11 pcs Cu gaskets 17/21x1.5 ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
Polycarbonate collection foils, 100 pcs, Ø25 mm, Collection foils for DLPI+ impactor stages, suitable for chemical ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
Impactor foil grease 10 g including mixing jar 1:20. Max 100 ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
For fast greasing of the collection substrates. Stencil not included. Hazardous material, needs special ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
Impactor foil grease 25 g, max 200 ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
10 and 2.5 μm collection plates plus storage case. 10 and 1 μm collection plates plus storage case. 3 collection plates plus storage ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
70 mm filter stage holder with 2.5 μm ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
The Dekati High Pressure Diluter DEED-300 is a two-stage dilution device for taking aerosol samples from high pressure conditions, such as in pre-DPF tailpipe emission measurements. The DEED-300 is designed especially for high pressure conditions, and it always keeps a constant dilution factor regardless of the sample pressure inside the tailpipe. The total dilution factor in the DEED-300 unit is ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...