22 products found

Products

  • Control System

  • ITK Envifront - Model CPFE - Air Bag Filter Control Manager

    ITK Envifront - Model CPFE - Air Bag Filter Control Manager

    The solution is called resistance measurement namely measurement of both pressure drop and flow. By measuring the resistance in different parts of industrial process evacuation plants for ex. bag filter plants you can keep an accurate track of the conditions on your filter plant which saves your money. About 20 years ago we introduced a control system, CPFA, for bag filters with the method resistance control measurement. The filtration resistance is...

  • ITK Envifront - Control System for Cremators

    ITK Envifront - Control System for Cremators

    The Control System has been designed for any type of cremation plant with or without abatement system for such as dust  mercury and dioxins. It has successfully been used on Envikraft and Facultatieve furnaces.With the system we reduce gas- or oilconsumption. The Control System is based on the latest Siemens PLC types and has an interface in an operation panel like PC-screen. We provide for distance service support via internet and/or via...

  • Dust Collection Fabric Filter

  • ITK Envifront - Model PFMS - Cassette Filter for Dust Collection in Industrial Processes

    ITK Envifront - Model PFMS - Cassette Filter for Dust Collection in Industrial Processes

    Intended for dust collection in industrial processes, where there are strict demands on availability and low dust emissions. PFMS is a pulse cleaned fabric filter for collection of dust from air and gasses. The filter is intended for continous operation and may, thanks to the sensible gas compound, work with filtering velocity. The filter is available as silo filter and with dust hopper in two variants.

  • Filter Elements

  • ITK Envifront - Active Particle Filtration Surface

    ITK Envifront - Active Particle Filtration Surface

    This standard is a measure of the properties of the filtration surface. Melted fibres at gasflaming or calendering at too high temperature will diminish the active (open) filtration surface. This will of course mean increased filtration velocity through dust cake as well as filtercloth.

  • Plant Accessories

  • ITK Envifront - Model SSDA - Micro Dosing System

    ITK Envifront - Model SSDA - Micro Dosing System

    SSDA is intended for cyclical or continual injection of sorbent/additives in flue gases. This can include heavy metals, dioxines or the neutralisation of acid gases in flue gases e.g. separation of mercury and dioxines in a crematorium or a facility for hazardous waste. In the flue gas duct in the vicinity of e.g. a contactor or a filter the sorbent is injected, where it mixes with the flue gas through a diffuser so that a homogenous mixture of flue...

  • ITK Envifront - Model SAL (A,S,T) - Dust Bin Connecting Device

    ITK Envifront - Model SAL (A,S,T) - Dust Bin Connecting Device

    Dust bin connecting devices SALA, SALT and SALS are three models with robust and tight lids between a dust collector\'s outfeed flange and the dust bin SALZ-01. The connection device is provided with a strong lifting device which allows the handling of container and dust with a total weight of 120 kg. The dampener is adapted to standard drums with a diameter of 560 mm. The device can be adapted to many connection diameters. The device is suitable for...

  • ITK Envifront - Model SGAB - Throttle Valve for Dust Filtration

    ITK Envifront - Model SGAB - Throttle Valve for Dust Filtration

    The throttle valve SGAB is a shut off valve intended for dust, sludge, gases and fluids. It can also be used as a draining valve for dust, gas or fluid suspensions, as a dust discharge and as a shut off valve for air and gas at temperatures of up to 80 C. The throttle valve SGAB is availabe for hand maneuvering, pneumatic maneuvrering with shaft actuators and electric valve as well as pneumatic maneuvering with shaft actuators, electric valve and...

  • ITK Envifront - Duct Cleaning Tool Rotaclean

    ITK Envifront - Duct Cleaning Tool Rotaclean

    Cleaning of ventilation ducts; Efficient tool for duct cleaning! Some ventilation ducts are more difficult to clean than others. Large rectangular ducts frequently have stays and other obstacles inside. Concrete or brick ducts often harbour lumps of mortar, which can become holding areas for contamination making cleaning by traditional meaning almost impossible. Rotaclean is the ideal duct cleaning tool to deal with these problems. Rotaclean is driven...

  • Flue Gas Condensation

    Flue gas condensation is a combination of heat reovery and dust separation, where pre-steamed heat, which can be found in the flue gas, is made use of, as well as being cleaned from the dust afterwards. The use of heat is currently done in solid fuel facilities, where fuel, which has a moisture content of >25 %, is used. Wood chips e.g. primarily green wood chips, have a moisture content of 40 - 55 % of the total weight. Flue gas condensation is used e.g. in wood chip fired incinera

  • ITK Envifront - Model KACS - Centrifugal Scrubber

    ITK Envifront - Model KACS - Centrifugal Scrubber

    The centrifugal scrubber KACS, is a counter-current contact apparatus for heat transferral and/or mass transferral between a medium in a gaseous state and a suspension of fluid droplets or sorbent particles in the gaseous state media.

  • Dynamic Separators

  • ITK Envifront - Cyclone Dynamic Dust Collector

    ITK Envifront - Cyclone Dynamic Dust Collector

    The cyclone is a simply constructed dynamic dust collector, which with help from the centrifugal power collects coarse and medium coarse, granular or short fibre dust, from air or another gas. To make the cyclone work satisfactory, the dust must be fairly dry and not be attachable or sticky.

  • Gas Cooling

  • ITK Envifront - Model VKR - Convector Cooler

    ITK Envifront - Model VKR - Convector Cooler

    The task of the convector cooler is to cool flue gasses from the furnace, from 800 - 900 °C down to about 200 - 240 °C. This is done with convection to the surrounding air . The cooling capacity must therefore be able to remain low at moments when the incoming temperature is lower than normally.

  • Flue Gas Cleaning / Gas Collection

  • ITK Envifront - Model PFMH-TFAC - Flue Gas Filter for Cremation Processes

    ITK Envifront - Model PFMH-TFAC - Flue Gas Filter for Cremation Processes

    The PFMH-TFAC filter is specially designed to clean flue gas from cremation processes. It is built to be able to fit in small premises with a low ceiling height and little space. The fabric filter PFMH's task is to clean the flue gas from particles of dust and the bed filter TFAC is composed with active carbon to clean the air from dioxides and mercury.

  • ITK Envifront - Model TAS  - Dry Flue Gasses Adsorption System

    ITK Envifront - Model TAS - Dry Flue Gasses Adsorption System

    The ITK Envifront TAS process is developed for cleaning of flue gasses through so called dry adsorption and is specially suited for crematories, small waste incineration plants or hazardous waste incineration plants. The system is dimensioned for plants with a size of 100-2000 kg/h, with a medium to high utilitization.

  • Vacuum System

  • ITK Envifront - Model FUHT - Vacuum Plant

    ITK Envifront - Model FUHT - Vacuum Plant

    Stationary vacuum systems are intended for cleaning of spaces in bigger industrial buildings and workshop localities. Mobile vacuum systems for scattered localities and big distances between the buildings.

  • Cleaning Equipment

    Cleaning Equipment

    For cleaning of everything from light to heavy industries such as food, paper industry, machine shops, foundries, heat and power plants and mining. Login to get access to product data sheets and an comprehensive list of parts and accessories.