Jiaxing E-Xon Power Technology Co.,Ltd. products

OBD Function. All roads, All-Weather, Best Driving Experience. High Demand Emission Standard. Aluminum Alloy Shell, Strong Anti-Jamming Capability 5. Self-Research.

V1.8 Smart System is a gas sequential injection gas supply system. When the system works, the gas ECU takes the fuel injection signal from original vehicle as the basic signal, and collects the parameters of the engine cooling water temperature, gas pressure and other parts at the same time to decide the final gas injection time and gas rail injector supply gas to the corresponding engine cylinder. When the switch is in the gas position, the gas ECU will automatically detect the conversion conditions which are already stored in the ECU. When the condition is met, system will switch to the gas. At this time, the gasoline injection nozzle is cut off, and the gas system ECU drives the gas rail injector to start working. The system is suitable for 3-4 cylinder of naturally aspirated and turbocharged engines, meet Emission six Requirement.

A two-stage compensated membrane pressure regulator with a water/gas heat exchanger, filter, high pressure gas solenoid valve and safety valve. Two sides have fixing points, enabling the reducer to be installed practically in any position. All connectors are on the same side for easier installation.

A two-stage compensated membrane pressure regulator with a water/gas heat exchanger, filter, high pressure gas solenoid valve and safety valve. Calibrated for a delivery pressure of 2 bar (200 kPa) higher than the pressure present in the aspiration ducts. Its rated capacity is 58m^³/h. 

Model no. : G02. Thread : G1/4. Working voltage : DC5V. Output voltage : 5-0V. ERP no. : TJ604008-2.

Gas Filter (11MM) Iron; Model : GLQ-I. Parameter:Φ11.

Product name : CNG filling valve. Model no. : T1H4. Weight : 760g. Material : Hot forging brass CNC machining. Maximum working pressure : 20MPa. Operating temperature : -40?----120?. Flow area : 19.6mm². Switch mode : Manual. Switch angle : 90°. Check valve : No. Outlet connector : M12X1. Bolt aperture : Φ24. ERP no.: CJ007018.