K.H. Brinkmann Pumps GmbH & Co. KG products

are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the coolant. The dimensions are based on standard specification EN 12157. The maximum coolant level must stay a few mm/inches below the mounting flange.

Quick Suctioning Immersion Pumps equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely air entrained fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet.

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. All pumps are equipped with a single mechanical seal. Upon request a second mechanical seal is available to allow for dry-running (-GD). This pump series is designed for horizontal installations next to a tank and for pumping air entrained coolant fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications. The SBA pumps are equipped with the user-friendly (SAE) flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G ¼. For more information see mechanical features within the technical information section.

Models TS12 to TS24 are suitable for CNC machine tools featuring coolant supply through the tool holder or driving spindle or equipped with internally cooled tool. These pumps are equipped with a peripheral impeller to achieve a compact high pressure unit. Series TS are suitable for filtered coolant only. To reduce pump pressure, models TS22 to TS24 are also available with an optional Y/YY (Dahlander) motor configuration for 4 pole operation at half speed.

Immersion Pumps: Our multistage pump models (S)TC25...(S)TC460 have been especially developed to supply internally cooled tools with coolant fluid. Closed impellers provide optimal hydraulic efficiencies while minimizing power consumption. A frequency converter can be supplied for special applications or for matching the pump characteristic to a specific duty point. See page "Control/Regulation" in the Technical Information section of this catalog for further information.  Extended length is possible. See medium pressure pumps features within the technical information section.

Pressure Boosting Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures at short immersion depths. Inline pumps of the series FH can be used as boostingpumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps of the series FH can raise the incoming pressure by up to 26 bar.

Quick Suctioning Immersion Pumps: series TFL/SFL equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely air entrained fluids (emulsions) with heavy chip loads as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SFL serie offers a flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections.

are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. The SBF125 pumps are equipped with double mechanical seal. The SBF550...1150 Pumps are equipped with a single mechanical seal. Upon request a second mechanical seal is available to allow for dry-running (-GD).

Immersion Pumps in Plastics. series KTF are suitable for various water supply problems. These pumps are also suitable for a wide range of chemical liquids. No shaft seal is required, due to the construction.

Immersion Pumps in Plastics series KTF and KTB are suitable for various water supply problems. These pumps are also suitable for a wide range of chemical liquids. No shaft seal is required, due to the construction.