Lear Siegler Australasia Pty. Ltd. (LSA)

Lear Siegler Australasia Pty. Ltd. (LSA)

141 products found

products

  • Particulate Monitoring

  • Teom - Model 1405 - Continuous Ambient Particulate Monitor

    Teom - Model 1405 - Continuous Ambient Particulate Monitor

    The TEOM 1405 distinguishes itself from other PM measurement methods by utilizing a direct mass measurement that is not subject to measurement uncertainties found in other surrogate technologies. It provides a self-referencing, NIST traceable direct mass measurement.

  • Teom - Model 1405-D - Continuous Dichotomous Ambient Particulate Monitor

    Teom - Model 1405-D - Continuous Dichotomous Ambient Particulate Monitor

    Consisting of a TEOM mass sensor and control unit in a network ready configuration, the TEOM 1405-D distinguishes itself from other PM measurement methods by utilizing a direct mass measurement that is not subject to measurement uncertainties found in other surrogate technologies. It provides a self-referencing, NIST traceable direct mass measurement.

  • Gas Analysers

  • LSA - Model 42iQ - NO-NO2-NOx Analyzer

    LSA - Model 42iQ - NO-NO2-NOx Analyzer

    Get 24/7 access to your analyzer’s information with a Thermo Scientific™ iQ Series Gas Analyzer. The iQ Series Gas Analyzers are engineered to get smarter over time and help minimize troubleshooting time with a highly precise, yet tough solution. The Thermo Scientific™ 42iQ NO-NO2-NOx Analyzer provides the same level of performance when measuring nitrogen oxide (NO-NO2-NOx) in the emissions from a source using chemiluminescent...

  • Mercury Monitoring

  • LSA - Model EMP-2 - Portable Mercury Survey Meter

    LSA - Model EMP-2 - Portable Mercury Survey Meter

    The EMP-2 is compact, lightweight and highly reliable portable continuous mercury analyzer.A portable atomic absorption spectrophotometer is installed in the equipment main body, so the equipment is easy to carry to any site, where you can ensure simple and quick measurement of elemental vapor phase mercury in the working environment.The EMP-2 provides a variety of applications that suggest new mercury measurement methods that can change conventional...

  • LSA - Model MA-3000 - Mercury Analyzer

    LSA - Model MA-3000 - Mercury Analyzer

    The MA-3000 is a global standard model of our thermal decomposition mercury measuring equipment that was developed in response to customer’s needs for equipment usable without “special knowledge” or “troublesome wet pretreatment. Without wet pretreatment using acids or alkalis, samples such as waste, soil, coal, and foods are directly, simply and quickly measured. Compared to the usual wet pretreatment-mercury measurement, the...

  • Water Monitoring

  • LSA - Model PST - Portable Peristaltic Samplers

    LSA - Model PST - Portable Peristaltic Samplers

    Model PST samplers use a unique 3/8-inch internal diameter (ID) peristaltic pump that significantly increases tubing life without sacrificing pump performance. It is the only peristaltic sampler on the market that is less than 18 inches in diameter and has space for 24 one-liter bottles and ice in an insulated bottle case. The PST provides composite or discrete sampling of non-toxic liquids.

  • Process Monitoring

  • LSA - Model 60i NDIR - Mulit Gas Analyzer

    LSA - Model 60i NDIR - Mulit Gas Analyzer

    Improve analyzer up time and lifespan with the Thermo Scientific™ NDIR Model 60i Multi-Gas Analyzer. This anlyzer utilizes non-dispersive infrared (NDIR) optical filter technology to measure five gases in addition to an oxygen measurement via either chemical cell or paramagnetic technology. It is the one of the only analyzers of its kind with built-in safeguards to protect itself against moisture damage.

  • LSA - Model TVA2020 - Toxic Vapor Analyzer

    LSA - Model TVA2020 - Toxic Vapor Analyzer

    Quickly detect organic and inorganic compounds in demanding applications such as Method 21 monitoring and site remediation with this lightweight, intrinsically safe portable detector. The Thermo Scientific™ TVA2020 Vapor Analyzer can be configured as flame ionization detector (FID) or dual detection technology (FID/PID-photo ionization detector) to offer fast response times. Key features include reduced response times, increased...

Products by Thermo Scientific - Air Quality Instruments

  • Thermo Fisher Scientific - Ambient Gas Analyzers

    We offer the industry's widest choice of air quality instruments and systems, adding flexibility and convenience to the detection of a broad range of gaseous and aerosol pollutants for ambient air monitoring.

  • Thermo Fisher Scientific - Model 111 - Zero Air Supply

    Thermo Fisher Scientific - Model 111 - Zero Air Supply

    The Thermo Scientific™ 111 Zero Air Supply is designed for applications where pollutant-free levels of NO, NOx, O3, SO2, CO and hydrocarbons are required, with flows up to 20L/min. at pressures of 30psi. This model uses an external compressor; the pressure regulators, chemical scrubbers, reactor and temperature controller are all contained in a single convenient case.

  • Thermo Fisher Scientific - Model 146i  - Multi-Gas Calibrator

    Thermo Fisher Scientific - Model 146i - Multi-Gas Calibrator

    The Model 146i mass flow controller  ozone generator, permeation tube oven, power supply and solenoid valves are integrated into a single microprocessor controlled unit. This permits easy to use menu driven software and a consistent set of operation screens for all calibration procedures. Additionally, the microprocessor can make many of the necessary calculations, thereby freeing the operator from having to make the calculations in the field or...

  • Thermo Fisher Scientific - Model 42i - NO-NO2-NOX Analyzer

    Thermo Fisher Scientific - Model 42i - NO-NO2-NOX Analyzer

    The Thermo Scientific Model 42i utlizes chemiluminescent technology to measure levels of nitrogen oxides (NO-NO2-NOx) in the emissions from a source. The flagship product in the Thermo Scientific iSeries line, the Model 42i is the most recognized NOx analyzer in the industry. Using chemiluminescence technology, the Model 42i measures the amount of nitrogen oxides in the air from sub-ppb levels up to 100ppm. The Model 42i is a single chamber, single...

  • Thermo Fisher Scientific - Model 42i TL - Trace Level NOx Analyzer

    Thermo Fisher Scientific - Model 42i TL - Trace Level NOx Analyzer

    Using chemiluminescence technology, the Model 42i-TL measures the amount of nitrogen oxides in the air from sub-ppb levels up to 1000ppb. The Model 42i-TL is a single chamber, single photomultiplier tube design that cycles between the NO, NOx and Zero modes. The addition of the Zero mode provides for excellent long term stability and extremely low minimum detectable limits. The  42i has independent outputs for NO, NO2 and NOx and each can be...

  • Thermo Fisher Scientific - Model 43i - SO2 Gas Analyzer

    Thermo Fisher Scientific - Model 43i - SO2 Gas Analyzer

    Using pulsed fluorescence technology, the Model 43i measures the amount of sulfur dioxide in the air up to 10ppm.  The pulsing of the U.V. source lamp serves to increase the optical intensity whereby a greater U.V. energy throughput and lower detectable SO2 concentration are realized.  Reflective bandpass filters, as compared to commonly used transmission filters, are less subject to photochemical degradation and more selective in wavelength...

  • Thermo Fisher Scientific - Model 48i - CO Gas Analyzer

    Thermo Fisher Scientific - Model 48i - CO Gas Analyzer

    Using gas filter correlation technology, the Model 48i measures the amount of carbon monoxide in the air.  The Model 48i is based on the principle that carbon monoxide (CO) absorbs infrared radiation at a wavelength of 4.6 microns. Because infrared absorption is a nonlinear measurement technique, it is necessary for the instrument electronics to transform the basic analyzer signal into a linear output. The Model 48i uses an exact calibration...

  • Thermo Fisher Scientific - Model 48i TLE - Enhanced Trace Level CO Analyzer

    Thermo Fisher Scientific - Model 48i TLE - Enhanced Trace Level CO Analyzer

    Using gas filter correlation technology, the Model 48i-TLE measures the amount of carbon monoxide in the air. The Model 48i-TLE is based on the principle that carbon monoxide (CO) absorbs infrared radiation at a wavelength of 4.6 microns. Because infrared absorption is a nonlinear measurement technique, it is necessary for the instrument electronics to transform the basic analyzer signal into the linear output. The Model 48i-TLE uses an exact...

  • Thermo Fisher Scientific - Model 49i  - Ozone Analyzers

    Thermo Fisher Scientific - Model 49i - Ozone Analyzers

    Using UV Photometric technology, the Model 49i measures the amount of ozone in the air from ppb levels up to 200ppm.The Model 49i is a dual cell photometer, the concept adopted by the NIST for the national ozone standard. Dual range and auto range are standard features in this  instrument. Because the instrument has both sample and reference flowing at the same time a response time of 20 seconds can be achieved.

  • Model 49i PS - Ozone Primary Standard

    Model 49i PS - Ozone Primary Standard

    Using UV Photometric technology, the Model 49i-PS is able to produce ozone at a rate of up to 5000 ppb.The Model 49i-PS is a dual cell photometer, the concept adopted by the NIST for the national ozone standard. The Model 49i-PS can operate with ozonator flow rates of up to 6 liters a minute. Because the instrument has both sample and reference flowing at the same time a response time of 20 seconds can be achieved.

  • Thermo Fisher Scientific - Model 43i TLE - Enhanced Trace Level SO2 Analyzer

    Thermo Fisher Scientific - Model 43i TLE - Enhanced Trace Level SO2 Analyzer

    Using pulsed fluorescence technology, the Model 43i -TLE measures the amount of sulfur dioxide in the air down to 50 ppt. The pulsing of the U.V. source lamp serves to increase the optical intensity whereby a greater U.V. energy throughput and lower detectable SO2 concentration are realized.  Reflective bandpass filters, as compared to commonly used transmission filters, are less subject to photochemical degradation  and more selective...

  • Thermo Fisher Scientific - Model 42iy - NOy Analyzer

    Thermo Fisher Scientific - Model 42iy - NOy Analyzer

    Using chemiluminescence technology the Model 42i-Y measures the amount of nitrogen oxides in the air from sub ppb levels up to 100ppm. The Model 42i-Y is a single photomultiplier tube design that measures NOy which includes most oxides of nitrogen with the exception of NH3 and N2O. Dual range and auto range are standard features in this instrument. Because the instrument is operated continuously in the NOy  mode, the response time is less than 10...

  • Thermo Fisher Scientific - Air Quality Monitoring: Source Gas Analyzers

    The stack is no place to take chances. After all, it's not enough to be in compliance. You also have to prove it. Which is why people choose Thermo for source emissions monitoring needs.

  • Thermo Fisher Scientific - Model 42i-HL - High Level Nitrogen Oxide Monitor

    Thermo Fisher Scientific - Model 42i-HL - High Level Nitrogen Oxide Monitor

    The Thermo Scientific™ Model 42i-HL is a chemiluminescent gas analyzer which measures nitrogen oxides (NO-NO2-NOx) in the emissions from a source. The Model 42i-HL is the industry standard for high level NOx Continuous Emissions Monitoring (CEM) systems and stack testing services. Using chemiluminescence technology, the Model 42i-HL measures the amount of nitrogen oxides in the air from 10ppm up to 5000ppm. The 42i-HL is a single chamber, single...

  • Thermo Fisher Scientific - Model 42i - LS Low Source NO-NO2-NOX Analyzer

    Thermo Fisher Scientific - Model 42i - LS Low Source NO-NO2-NOX Analyzer

    Using chemiluminescence technology, the Model 42i LS measures the amount of nitrogen oxides in the air from sub-ppb levels up to 100ppm.The Model 42i LS is a single Chamber, single photomultiplier tube design that cycles between the NO and NOX modes. The 42i LS has independent outputs for NO, NO2, and Nox and each can be calibrated separately.  Dual range and Auto range are standards features as well.  If required, the instrument can be...

  • Thermo Fisher Scientific - Model 43i HL - High Level SO2 Analyzer

    Thermo Fisher Scientific - Model 43i HL - High Level SO2 Analyzer

    Using pulsed florescence technology, the Model 43i-HL SO2 measures th amount of sulfur dioxide in the air from sub ppm levels up to 1,000 ppm in standard range mode and from 100ppm up to 10,000ppm in extended range. Dual range and auto range are standard features in this instrument as well as temperature and pressure correction. User settable alarm levels for concentration and for a  wide variety of internal diagnostics are available from an easy...

  • Thermo Fisher Scientific - Model 48i HL - High Level CO Analyzer

    Thermo Fisher Scientific - Model 48i HL - High Level CO Analyzer

    Using gas filter correlation technology, the Model 48i-HL measures the amount of carbon monoxide in the sample.  The Model 48i-HL is based on the principle that carbon monoxide (CO) absorbs infrared radiation at a wavelength of 4.6 microns. Because infrared absorption is a nonlinear measurement technique, it is necessary for the instrument electronics to transform the basic analyzer signal into a linear output.

  • Model 300 - Diluting Stack Sampler

    Model 300 - Diluting Stack Sampler

    Diluting Stack Probe Model EPM.300 Series performs four critical functions to prepare a sample from the stack (sample delivery, course filtering, fine filtering, and sample dilution).Dilution Probes are proven performers with low maintenance requirements in the field and a long life on the stack.The system uses an air driven aspirator which extracts the sample from the stack. It is then passed consecutively through a coarse and fine particulate...

  • Model 797.381 - Out of Stack Diluting Sampler

    Model 797.381 - Out of Stack Diluting Sampler

    This out of stack sampler provides reliable sample stability and reduces moisture in the sample. Well suited for high particulate and wet samples, promotes long filter life and can withstand contant exposure in the harshest stack environments, Usable with a wide range of ambient air analyzers, this sampler provides a strong single mounting point adaptable to a variety of port sizes.

  • Model PRO902C Modular - External Low Flow Dilution Probe

    Model PRO902C Modular - External Low Flow Dilution Probe

    PRO902C Probe handles the toughest environments while offering significant advantages over typical in-stack dilution probes.The dilution extractive technology in combination with the thermo-electric cooler provides accurate and concise readings available in both terms of concentration and mass-emission rates. aturing an O2 fuel cell for oxygen measurement at the probe site, values are displayed and adjusted from the rack location. The PRO902C also...

  • Model 445 - Compliance Opacity Monitoring System

    Model 445 - Compliance Opacity Monitoring System

    The Model 445 is a robust dust concentration monitor for a broad range of applications. The instrument features automatic check cycles, built-in 4 point linearity check and contamination correction.

  • Thermo Fisher Scientific - Air Quality Monitoring: Ambient Particulate Analyzers

    Meets EPA reference Method for PM10 and PM2.5 sampling of airborne particulate monitoring.

  • Model FH 62 C14 - Continuous Particulate Monitor

    Model FH 62 C14 - Continuous Particulate Monitor

    Advanced FH62 systems provide continuous automatic, real-time ambinet particulate measurement and are ideal for air quality measurement and for air quality networks. They can be configured for TSP, PM10, and PM2.5 sampling. Extremely accurate and insensitive to vibration, they are the only beta gauges with a truely continuous 60-minute to 24-hour sampling cycle and no stepwise response. U.S. EPA Designated Method EQPM-1102-150.

  • Model 5012 - Multi Angle Absorption Photometer

    Model 5012 - Multi Angle Absorption Photometer

    The Model 5012 MAAP measures the aerosol-related absorption of light and the corresponding atmospheric black carbon mass concentration. Continuous data is provided by a multiple detector setup to simultaneously measure the transmitted and the scattered light from a particle-loaded filter. Typical applications include determining ambient elemental carbon for health-related effects and aerosol light absorption for visibility monitoring (regional haze)...

  • Model 2000 - Partisol FRM

    Model 2000 - Partisol FRM

    The Partisol-FRM Model 2000 Air Sampler is USEPA reference method designated for both PM-2.5 and PM-10. It is the proven manual sampling platform for the USEPA PM-2.5 standard. It is based upon the original Partisol Air Sampler, which received the USEPA reference designation for PM-10 measurements in June 1994.

  • Thermo - PM10/PM2.5 Dichotomous Air Sampler

    Thermo - PM10/PM2.5 Dichotomous Air Sampler

    The manual dichotomous sampler is used for routine compliance montoring for PM10 and PM2.5. The Dichotomous sampler operates at a flow rate of 1 CHM (16.7 LPM) and is available with built-in mechanical 6-day or 7-day times, or an electronic digital programmable timer.

Products by California Analytical Instruments, Inc. (CAI)

  • Chemiluminescence Analyzers (CLD)

  • Model 600 CLD - Chemiluminescence Analyzers

    Model 600 CLD - Chemiluminescence Analyzers

    The chemiluminescence method is used to measure the reaction between ozone and nitric oxide. In the NOx mode, the sample is routed through a converter. The resultant reaction is directly proportional to the total concentration of NOx. The reliability and rapid response time of CAI CLD analyzers make them particularly well-suited for the following applications:

  • Model 650 - Chemiluminescent NO/NOx & Paramagnetic Oxygen Analyzerr

    Model 650 - Chemiluminescent NO/NOx & Paramagnetic Oxygen Analyzerr

    The California Analytical Model 650 NOxygen NO/NOX/NO2/O2 digital analyzer is designed around a state-of-the-art 16 bit microprocessor, with 16 digital inputs, 16 digital outputs, 16 analog inputs and 4 analog outputs. The analyzer can be manually operated from the keypad or remotely via TCP/IP, RS-232C communications and discrete inputs. The analyzer display includes screen presentation of all analyzer alarms. Four levels of password protection are...

  • Model 600 HCLD - NO/NOx Chemiluminescent Analyzer

    Model 600 HCLD - NO/NOx Chemiluminescent Analyzer

    The California Analytical Instruments Model 600 HCLD NO/NOx digital analyzer is designed around a state-of-the-art 16-bit microprocessor. The 16 bit microprocessor control board consists of the MSR-Card with 16 digital inputs, 16 digital outputs, 16 analog inputs and 4 analog outputs. The analyzer can be manually operated from the keypad or remotely via TCP/ IP, RS-232C communications and discrete inputs. The analyzer display includes screen...

  • Non-Dispersive Infrared (NDIR) Analyzers

  • Model 600 Series - NDIR/Oxygen Multi-Component Analyzer

    Model 600 Series - NDIR/Oxygen Multi-Component Analyzer

    TheCAl Series 600 NDIR/02 analyzer is based on the infrared absorption characteristics of gases. Using a single infrared beam to measure gas concentrations, this analyzer delivers highly stable and reliable results. A single infrared light beam is modulated by a chopper system and passed through a sample cell of predetermined length containing the gas sample to be analyzed. As the beam passes through the cell, the sample gas absorbs some of its...

  • Model ZRE NDIR/O2 - NDIR/Oxygen Analyzer

    Model ZRE NDIR/O2 - NDIR/Oxygen Analyzer

    Cftl ZRE analyzers are based on the infrared absorption characteristics of gases. Using a single infrared beam to measure gas concentrations, ZRE analyzers deliver highly stable and reliable results. The infrared light beam is modulated by a chopper system and passed through a sample cell of predetermined length that contains the gas sample to be analyzed. As the beam passes through the cell, the sample gas absorbs some of its energy. The attenuated...

  • Oxygen Analyzers

  • Model 600P - Oxygen Analyzers

    Model 600P - Oxygen Analyzers

    CAI offers two dedicated analyzer models to measure Oxygen in a sample. The 600P uses paramagnetic technology and the 600F uses a fuel cell method to determine the percentage level of oxygen contained in a gas sample.

  • Fourier Transform Infrared Analyzer (FTIR)

  • Model 600 Series - Fourier Transform Infrared Analyzer

    Model 600 Series - Fourier Transform Infrared Analyzer

    The California Analytical Instruments Series 600 FTIR provides fast, continuous and stable analysis of virtually any gas which has an infrared absorption spectrum. The proprietary heated sample cell allows the instrument to accommodate hot samples containing high levels of moisture. The 600 Series FTIR can simultaneously measure, display and output multiple gases to serve a variety of applications including diesel emissions, CEM monitoring, ammonia...

  • Model 600 SC FTIR - Fourier Transform Infrared Analyzer

    Model 600 SC FTIR - Fourier Transform Infrared Analyzer

    The California Analytical Instruments 600 SO FIR Analyzer provides fast; continuous and stable analysis of virtually any gas that has an infrared absorption spectrum. The proprietary sample cell enables the instrument to accommodate hot samples containing high levels of moisture. The 600 SC FTIR can serve a variety of analytical applications, including diesel emissions, OEM monitoring, ammonia slip, SCR inlet/outlet monitoring, process monitoring and...

  • Model 700 FTIR - Fourier Transform Infrared Analyzer

    Model 700 FTIR - Fourier Transform Infrared Analyzer

    The California Analytical Instruments 700 FTIR Analyzer provides fast; continuous and stable analysis of virtually any gas that has an infrared absorption spectrum. The proprietary heated sample cell enables the instrument to accommodate hot samples containing high levels of moisture. The 700 FIR can serve a variety of analytical applications, including diesel emissions, OEM monitoring, ammonia slip, SCR inlet/outlet monitoring, process monitoring and...

  • Model 700 FTIR - Heated Sampler

    Model 700 FTIR - Heated Sampler

    Provides temperature-control circuits for oven, pump, internal heated sample line (up to 10 ft. between sampler and analyzer) and heated jacket(entry to analyzer). Ensures that critical components are heated to 191 °C

  • Flame Ionization Detection Analyzers (FID)

    The analyzer utilizes the principle of Flame Ionization Detection method to determine the THC, CH4 and NMHC within a gaseous sample. A gaseous sample becomes ionized in the flame and the electrostatic field causes the charged particles to migrate. The migration creates a small current. This current is measured by the amplifier and is directly proportional to the hydrocarbon concentration in the sample.

  • CAI - Model 600 Series - FID Hydrocarbon Analyzer

    CAI - Model 600 Series - FID Hydrocarbon Analyzer

    The California Analytical Instruments Model 600 FID Analyzers are designed to continuously measure the total concentration of hydrocarbons within a gaseous sample. The analyzers exhibit superior sensitivity and response time. The gaseous sample can be exhaust gases from an internal combustion engine, a combustion process or VOC abatement systems.

  • CAI  - Model 600 Series  - HFID Hydrocarbon Analyzer

    CAI - Model 600 Series - HFID Hydrocarbon Analyzer

    The California Analytical Instruments Model 600 HFID Analyzers are designed to continuously measure the total concentration of hydrocarbons within a gaseous sample. The analyzers exhibit superior sensitivity and response time. The gaseous sample can be exhaust gases from an internal combustion engine, a combustion process or VOC abatement systems. The instrument can measure THC in the ppm or percent levels. All internal components are maintained at...

  • Model CAI 600 Series - M-HFID Total Hydrocarbon/Methane/Non-Methane Hydrocarbon Analyzer

    Model CAI 600 Series - M-HFID Total Hydrocarbon/Methane/Non-Methane Hydrocarbon Analyzer

    The California Analytical Instruments’ Model 600 MHFID Analyzer is designed to continuously measure the total concentration of hydrocarbons or methane within a gaseous sample. The analyzers exhibit superior sensitivity and response time. The gaseous sample can be exhaust gases from an internal combustion engine, a combustion process or VOC abatement systems. The instrument can measure THC or CH4 in the ppm or percent levels. All internal...

  • UV Fluorescence Analyzers

    This method is based on the fluorescence of SO2 due to absorption of ultraviolet (UV) energy. A UV lamp emits ultraviolet radiation that passes through a filter which excites the SO2 molecules and produce slight which is measured by a photomultiplier tube (PMT).

  • 600 Series UV SO2 Analyzer

    600 Series UV SO2 Analyzer

    The California Analytical Series 600 digital analyzer product line is designed around a state of the art 16 bit microprocessor, with 16 digital inputs, 16 digital outputs, 16 analog inputs and 4 analog outputs. The analyzer can be manually operated from the keypad or remotely via TCP/IP, RS-232 communications and discrete inputs. The analyzer display includes screen presentation of all analyzer alarms. Four levels of password protection are provided....

  • Specialty Products

    CAI supplies peripheral equipment for enhanced sample handling and cost saving products.

  • ZAG-6L Zero Air Generator

    ZAG-6L Zero Air Generator

    The California Analytical Model ZAG-6L has been designed to operate continuously 24hours/ day, 7 days/week to provide a pure air source of “zero air” for use in analytical gas analysis equipment. The ZAG-6L completely eliminates the inconvenience and high costs of precision blended zero air cylinders. This is particularly important with instrumentation which, in addition to zero calibration air, requires pure air for burner combustion...

  • Model Pump Pak II

    Model Pump Pak II

    The CAI Pump Pak II was designed to provide analyzers without internal sample pumps with a means of delivering sample for analysis.

  • Model 101 Series Heated Sample Diluter

    Model 101 Series Heated Sample Diluter

    The CAI Model 101 Heated Sample Diluter is designed to precisely dilute samples of high concentrations of analytes and/or humidity. The Diluter has an internal heated sample pump and temperature adjustable oven. All components in contact with the sample are maintained at the set oven temperature preventing condensation. Dry air is mixed with the sample to the required dilution ratio insuring no condensate will be introduced into the analyzer.

  • Model 600 SGD - Gas Divider

    Model 600 SGD - Gas Divider

    The Model 600 SGD will allow a master calibration gas to be diluted by up to 63 points with and dilute gas. Savings in master gas cylinders and automatic operation will provide a cost effective solution to large inventories of cylinders. The internal microprocessor offers different levels of access with code protected user levels to protect from unauthorized changes of internal parameters. The internal gas list is used to store various gases and user...

  • Mark 3 Sampling System

    Mark 3 Sampling System

    The California Analytical Instruments Mark 3 Intelligent Sampling System is a third generation single board computer controlled industrial sequencer. The system has been developed over many years as higher specifications components have been added to the proven single board computers on the Mark 1 and Mark 2 Samplers. These have been in production for over 15 years. CAI specialize in custom building these systems and are able to modify and write special...

  • Integrated Systems

    CAI manufactures complete analysis systems for a  wide range of applications within many industries.

  • 600 Series NOxBox

    600 Series NOxBox

    The California Analytical Instruments’ NOxBox system has been specifically designed for harsh environment conditions frequently found in outdoor selective catalytic reactor applications. The analyzer system is housed in a Nema 4 enclosure with a front lockable door. The enclosure contains a heating and cooling system to maintain a constant internal temperature for the gas analyzer and interface equipment regardless of outside environmental...

  • Boiler Monitoring Systems

    Boiler Monitoring Systems

    Climate controlled NEMA Enclosure. Gases Available are CO, CO2, O2, NOX, HC. Utilizes Infrared, Chemiluminescent, FID and Paramagnetic Technologies. Sample Conditioning System Provides Clean, Dry Sample Gas Stream to Analyzers. Sample Probe With Heated Filter and Blowback. Withstands Sample Temperatures of up to 600 degrees F.

  • 600 LFG CH4/02 Land Fill Gas Analysis System

    600 LFG CH4/02 Land Fill Gas Analysis System

    Methane and Oxygen analyzer is housed in a climate controlled NEMA 4 or 4X enclosure approximately 48” H X 36” W X 16” D. The enclosure includes fittings for calibration gases, sample gas, and exhaust, solenoid valves for automatic calibration of each gas, inlet pressure regulator, flow meter with needle valve, particulate filter, and back pressure regulator assembly. Optional CO2 channel, water removal system, and sample pump are...

  • Mobile Source Emissions (Roll Around Emissions Cart)

    Mobile Source Emissions (Roll Around Emissions Cart)

    The California Analytical Emissions Cart has been designed to provide a compact, self-contained emissions system. The complete system is contained in a single bay, roll around cabinet that may be moved to various test sites as required. This system will allow direct measurement of carbon monoxide, carbon dioxide, oxygen, total hydrocarbons and oxides of nitrogen using proven research grade gas analyzers. All analyzers are Federal Register compliant ,...

  • Photoacoustic IR Analyzers

    In Photoacoustic Spectroscopy (PAS) the gas to be measured is irradiated by modulated light of a pre-selected wavelength. The gas molecules absorb some of the light energy and convert it into an acoustic signal which is detected by a microphone.

  • 1314/1412 Photoacoustic Analyzer

    1314/1412 Photoacoustic Analyzer

    The Innova Photoacoustic gas analyzers are highly accurate, reliable, and stable. Two versions of the analyzer are offered, the Model 1412 which is configured for bench top operation and the Model 1314 which is configured for rack mounted operation. The measurement system is based on photoacoustic Infrared detection and provides the capability of measuring virtually any gas that absorbs in the infrared spectrum. Gas selectivity is achieved through the...

Products by Deckma Hamburg GmbH

  • Model OMD- 24 Series - Bilge Alarm System

    Model OMD- 24 Series - Bilge Alarm System

    The OMD-24 Bilge Alarm Unit has been designed specifically for use in conjunction with 15 ppm oil-water separator units and has a specification and performance which exceeds the requirements of the International Maritime Organization specifications for 15ppm Bilge Alarms contained in Resolution MEPC. 107 (49). The unit is supplied with 2 works-adjusted alarms at 15 ppm. Other set points (10 ppm or 5 ppm) are possible and can be adjusted on site at any...

  • Model OMD- 7 MKII - Industrial Monitors

    Model OMD- 7 MKII - Industrial Monitors

    DECKMA HAMBURG GmbH are proud to announce the launch of an all new Oil-in-Water Monitor, the 'OMD-7 MKII Industrial Monitor', designed to measure the content of Free Oils, Suspended Solids and Turbidity in Water continuously and independently. This design represents the first all new Industrial Monitor capable of distinguishing between the different characteristics of Oil particles, Solid particles and Water Turbidity on a continuous basis. The OMD-7...

  • Model OMD- 32 Series - Oil-in-Water Monitor

    Model OMD- 32 Series - Oil-in-Water Monitor

    The OMD-32 Oil-in-Water Monitor has been designed specifically for use in conjunction with oil-water separator units. The OMD-32 has been constructed using technology of the DECKMA HAMBURG OMD series industrial instruments and 15ppm Bilge Alarm Monitors, that have a specification and performance which exceeds the requirements of the International Maritime Organization specifications for 15ppm Oil-in-Water Monitors contained in Resolution...

Products by Environics, Inc.

  • Ambient Monitor Gas Calibrators with Ozone Generators

    Environics Ambient Monitor Calibrator with Ozone Generators facilitate dynamic calibration of ambient air analyzers. These instruments automatically perform zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. All ozone generators are factory calibrated using a NIST traceable ozone standard. The Series 6100, Series 6103 and Series 9100 all meet or exceed U.S. Environmental Protection Agency requirements.

  • Environics - Model Series 6100 - Computerized Multi-Gas Calibration System

    Environics - Model Series 6100 - Computerized Multi-Gas Calibration System

    The Environics Series 6100 Computerized Multi-Gas Calibration System is a computer controlled, state-of-the-art instrument for dynamic multi-point gas calibration of ambient air analyzers. The Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases of interest. The 6100 meets all U.S. Environmental Protection Agency requirements. The Series 6100 consists of a single...

  • Environics - Model Series 6103 - Ozone Transfer Standard / Multi-Gas Calibrator

    Environics - Model Series 6103 - Ozone Transfer Standard / Multi-Gas Calibrator

    The Environics Series 6103 Ozone Transfer Standard / Multi-Gas Calibrator is a computer controlled, state-of-the-art instrument for dynamic calibration of ambient air analyzers. The Series 6103 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases of interest. The 6103 meets or exceeds all U.S. Environmental Protection Agency requirements. The Series 6103 consists of a single...

  • Environics - Model Series 9100 - Ambient Monitoring Calibration System

    Environics - Model Series 9100 - Ambient Monitoring Calibration System

    The Environics Series 9100 Computerized Ambient Monitoring Calibration System is an advanced microprocessor controlled instrument for dynamic calibration of ambient air analyzers.The Environics 9100 is the unit of choice in the Air Quality Monitoring Programs of the EPA and California Air Resource Board (CARB). The Series 9100 can house up to three (3) MFCs, giving the user a larger range of possible dilutions and a lower concentration of the gas or...

  • Model Series 7000 - Zero Air Generator

    The Environics® Series 7000 Zero Air Generators are easy to install, require minimal upkeep and are safer, easier and less costly than high pressure gas cylinders. The Zero Air Generators are capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air, with

  • Environics - Model Series 7000 - Stand Alone Zero Air Generator

    Environics - Model Series 7000 - Stand Alone Zero Air Generator

    The Environics Series 7000 Zero Air Generator is a pure air generator system that is capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air.  The ZAG is a powerful stand-alone unit, so there is no need for you to worry about an external compressed air supply.   The air is a perfect method for generating zero reference calibration gas, ultra-pure combustion air for flame...

  • Environics - Model Series 7000 - High Purity Zero Air Generator

    Environics - Model Series 7000 - High Purity Zero Air Generator

    The Environics® Series 7000 Zero Air Generator is a high purity air generator system that is capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air. The Environics ZAG will produce high purity zero air from your dry compressed air source, eliminating the need for expensive, dangerous and bulky gas cylinders. Installation is as simple as connecting to a standard...

  • Gas Mixers and Gas Blenders

    Environics Gas Mixers and Gas Blenders automatically blends gases to generate precise gas calibration standards, create gaseous atmospheres or produce gas mixes for analytical research or production purposes. Each component concentration may be independently varied in response to user commands. With an accuracy of +/- 1% and repeatability of +/- .05% of setpoint, the Series 2000 and Series 4000 can produce gas concentrations from percent levels to ppb for single or multi-point calibration.

  • Environics - Gas Chromatography Calibration System

    Environics - Gas Chromatography Calibration System

    Environics Gas Mixers, Dilutors and Dividers have been the used in laboratories for over twenty years for applications including gas chromatography-mass spectrometry (GC-MS), GC with Flame Ionization Detector (GC-FID), and GC with thermal conductivity detector (GC-TCD). Our systems can produce gas concentrations from percent to ppb levels at the required flow rates for single or multi-point calibration. In all cases, Environics mixers allow you to use...

  • Environics - Model Series 4000 - Multi-Component Gas Mixing System

    Environics - Model Series 4000 - Multi-Component Gas Mixing System

    A low cost, multi-component gas mixing system with an advanced Windows user interface, the Series 4000 now has the expanded capability of mixing up to seven individual gases in a balance gas. The standard unit also comes with USB. The Environics® Series 4000 is a multi-component gas mixing system that now automatically mixes up to seven individual gases in a balance gas. The gas mixes can be used in generating precise gas calibration standards,...

  • Environics - Gas Mixers for Sensor Screening and Research Systems

    Environics - Gas Mixers for Sensor Screening and Research Systems

    Environics gas mixing and gas delivery systems are used extensively by sensor development companies as well as sensor manufacturers. Our systems are ideal for production screening (sorting) of sensors as well as research and development. The Environics systems are an efficient and versatile piece of laboratory equipment. Each system is a custom built, computerized, mass flow controller based systems which allow you to automatically blends and dilutes...

  • Gas Dilution System and Gas Divider

    Environics Gas Dilutors and Gas Dividers automatically generate precise gas standards for rapid multi-point calibration of analyzers. With an accuracy of +/- 1% and repeatability of +/- .05% of setpoint, each system's mass flow controllers are factory calibrated using a computer controlled primary flow standard traceable to the United States' National Institute of Standards and Technology (NIST). The calibration data consists of an eleven-point comparison of commanded versus actual flow with

  • Environics - Model Series 4040 - Computerized Gas Dilution System

    Environics - Model Series 4040 - Computerized Gas Dilution System

    A low cost, computerized gas dilution system with an advanced Windows user interface, the 4040 now supports up to eight mass flow controllers, allowing a broader range of dilutions (up to 10,000:1). The Environics® Series 4040 is a computerized gas dilution system that automatically generates precise gas standards for rapid multi-point calibration of analyzers. The gas mixes can be used in generating precise gas calibration standards, creating gaseous...

  • Environics - Model 4000 - Series 4040 Automotive Gas Divider

    Environics - Model 4000 - Series 4040 Automotive Gas Divider

    The Environics® Series 4040 Automotive Gas Divider is an advanced instrument for the dynamic calibration of automotive or mobile source emissions analyzers. This system stands out from competitors in its ability to generate infinitely varied concentrations within the operating range of the instrument, protecting your investment and giving you the needed flexibility should standards change.

  • Environics - Model 4000 - Series 4040 VOC Gas Dilution System

    Environics - Model 4000 - Series 4040 VOC Gas Dilution System

    The Environics® Series 4040 VOC Gas Dilution System is a microprocessor based gas dilution system designed for the preparation of calibration standards used for VOC (Volatile Organic Compounds) monitoring programs. This system stands out from competitors in its ability to generate infinitely varied concentrations within the operating range of the instrument.

  • Environics - Model 4040 - Continuous Emissions Monitoring (CEM) Calibration Systems

    Environics - Model 4040 - Continuous Emissions Monitoring (CEM) Calibration Systems

    The Environics Series Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. Our systems are custom built, computerized, mass flow controller based gas calibration systems which allow you to dilute a single high concentration cylinder of span gas to low levels for the...

  • Gas Mixers and Gas Dilutors

    Environics Gas Blending and Gas Dilution systems offer the unique capability to blend and dilute gases in a single chassis system. The gas mixes can be used in generating precise gas calibration standards, creating gaseous atmospheres or producing gas mixes for analytical research or production purposes. With an accuracy of +/- 1% and repeatability of +/- .05% of setpoint, the Series 2040 and Series 4020 can provide

  • Environics - Model Series 4020 - Computerized Gas Mixing and Gas Dilution System

    Environics - Model Series 4020 - Computerized Gas Mixing and Gas Dilution System

    A low cost, computerized gas blending and gas dilution system with an advanced Windows user interface, the Series 4020 now has the expanded capability of mixing up to 7 gases in a balance gas or diluting up to 10:000:1. The Environics® Series 4020 is a computerized gas mixing/dilution system which offers the unique capability of mixing or diluting gases in a single chassis. The gas mixes can be used in generating precise gas calibration standards,...

  • Environics - Medical/Biological Gas Flow and Scientific Research Applications

    Environics - Medical/Biological Gas Flow and Scientific Research Applications

    Environics gas mixing, blending and dilution systems provide for precise mixing of gases for a wide variety of clinical applications. Our systems can produce gas concentrations from percent to ppb levels for single or multi-point calibration. The high accuracy of our mixers make them the units of choice for a wide variety of laboratory and research applications. For example, Environics Biological Atmosphere Incubation Mixers provide stable and accurate...

  • Environics - Explosive Gas Mixing/Dilution Applications

    Environics - Explosive Gas Mixing/Dilution Applications

    Some research and industrial applications call for the dilution of explosive gases at high concentrations. Most often, this is in order to calibrate gas detectors. To meet these unique needs, Environics designed a modified version of our Series 4040 gas dilution system which included a dual chassis design.

  • Others

  • Environics - Reduced Oxygen Breathing Device 2 (ROBD2)

    Environics - Reduced Oxygen Breathing Device 2 (ROBD2)

    The Environics Series 6202 Reduced Oxygen Breathing Device simulates altitude exposure and can be utilized for both research and training purposes. The U. S. Navy currently uses the ROBD 2 to train aircrew to recognize the signs and symptoms of hypoxia and to perform the appropriate emergency procedures and additionally, conducts hypoxia research.

  • Environics - Model Series 3000 - Biological Atmosphere Incubation Gas Mixers

    Environics - Model Series 3000 - Biological Atmosphere Incubation Gas Mixers

    This 'On Demand' gas delivery and blending system will provide cost savings and repeatability of your gaseous atmosphere. The Environics® Series 3000 gas delivery/blending system offers on-site gas blending of 100% pure bulk gases and is configured to provide a solution to using costly premixed cylinders of gas. Unlike premixed cylinders, the Environics 3000 provides a repeatable blend of gases, using precision thermal mass flow controllers. The...

  • Environics - Humidity and Canister Filling Options

    Environics - Humidity and Canister Filling Options

    The humidification option allows specific Relative Humidity (RH) levels to be added to the output gas of the system. RH levels between 0 - 99% can be achieved. The humidifier is factory calibrated for a specific RH level to an accuracy of 5% (assuming a constant flow rate and gas temperature), and is NIST traceable.

  • Environics - Model 5000 - Stand-Alone Permeation System

    Environics - Model 5000 - Stand-Alone Permeation System

    The Series 500 Stand Alone Permeation System is an exciting new product from Environics. The standard configuration is a passive system. The oven allows for single or multiple disposible permeation tubes. The system is extremely reliable, with accurate and stability of the temperature within 0.1oC. The temperature can be anywhere from room temperature to 50oC.

Products by Envitech Europe

  • I/O Modules

  • EnviDAQ - Model 9410 - 4-Slot Sub-Controller

    EnviDAQ - Model 9410 - 4-Slot Sub-Controller

    Easy to install and networking RS-485 communication; Each system has 4 slot, Max can support 128 I/O point; Support various software including Windows DLL driver, OCX driver, OPC server and HMI/SCAPA software driver.; With surge protection, avoid system to be damaged by dangerous voltage and power transients; Can use one R-8510 repeater to expand network, each system can have Max 256 R-9000 unit, max transmit distance can reach 10km.

  • EnviDAQ - Model 9420 - 4-Slot Sub-Controller

    EnviDAQ - Model 9420 - 4-Slot Sub-Controller

    ARM 32-bit RISC CPU; 10/100 base-T automatically check high speed communication terminal; Support Modbus/TCP communication protocol, easy to integrate; Support UDP event dealing function; Can transmit 100M without any repeater; 8 I/O slot can support128 point data monitor; Build-in system auto-reposition watchdog.

  • EnviDAQ - Model 9820 - 8-Slot Sub-Controller

    EnviDAQ - Model 9820 - 8-Slot Sub-Controller

    ARM 32-bit RISC CPU; 10/100 base-T automatically check high speed communication terminal; Support Modbus/TCP communication protocol, easy to integrate; Support UDP event dealing function; Can transmit 100M without any repeater; 8 I/O slot can support128 point data monitor; Build-in system auto-reposition watchdog.

  • EnviDAQ - Model 9017 - 8-Channel Analog Input Module

    EnviDAQ - Model 9017 - 8-Channel Analog Input Module

    Extremely cost-effective solution for industrial measurement and monitoring applications; Provides programmable input ranges on all channels; Signal fidelity is maintained even under fault conditions that would destroy other multiplexers; This module can withstand an input voltage of 70 Vp-p with ±15V supplies; 16-bit, 8-channel analog differential input module that provides programmable input ranges on all channels; Accepts millivolt inputs,...

  • EnviDAQ - Model 9018 - 7-Channel Thermocouple Input Module

    EnviDAQ - Model 9018 - 7-Channel Thermocouple Input Module

    16-bit, 7-channel thermocouple input module; The module features programmable input range on all channels; Accepts millivolt inputs, voltage inputs, current inputs and thermocouple input (J,K,T,R,S,E,B); The module forwards the data to host computer in engineering units; An external CJC on the plug-in terminal is designed for accurate temperature measurement.

  • EnviDAQ - Model 9080 - 4-Channel Frequency/Counter Module

    EnviDAQ - Model 9080 - 4-Channel Frequency/Counter Module

    Channel: 4; Max counter: 4,294,967,285(32-bit); Input frequency: frequency model: 0.3~1000Hz (Max); counter model: 5000Hz (Max); Model: counter (plus/minus, two-way) frequency; Power consumption: 1.3W (typical) 1.5 (Max); Programmable digital noise filter: 8~65000ms.

Products by Cerex Monitoring Solutions, LLC.

  • Open-Path Multi-Gas Analyzers: UV DOAS and FTIR

    Applications: Continuous Perimeter Monitoring, Fugitive Emissions Monitoring, Source Monitoring, Leak Detection, Release and Hazmat Response.

  • Cerex AirSentry - Model FTIR - Open Path Multi-Gas Analyzer

    Cerex AirSentry - Model FTIR - Open Path Multi-Gas Analyzer

    The Cerex AirSentry FTIR multi-gas analyzer is the recognized choice in open path FTIR and the most reliable for monitoring industrial facilities, accidental releases, and hazardous waste site emissions. The system monitors from 5 to 1,000 meters and eliminates the need for many single point gas specific sensors, lengthy calibrations, and laboratory analysis. The Cerex AirSentry FTIR is the only commercial open-path FTIR evaluated in two USEPA site...

  • Cerex - Model UV Sentry - Open Path Multi-Gas Analyzers

    Cerex - Model UV Sentry - Open Path Multi-Gas Analyzers

    The Cerex UV Sentry Open Path Multi-gas Analyzer sets the industry standard for time-resolved, gap-less fugitive emissions and chemical emergency monitoring across fencelines, around process units and around tank farms.

  • Portable Point Analyzers: UVDOAS and FTIR

    Applications: Industrial Hygiene Monitoring, Leak Detection, Ambient Air Monitoring, Hazmat and Release Response Monitoring, Indoor Air Quality

  • Cerex - Model UV Hound Series - Portable UVDOAS Multi-gas Analyzers

    Cerex - Model UV Hound Series - Portable UVDOAS Multi-gas Analyzers

    The Cerex Hound series point gas detectors are portable multi-gas analyzers developed to detect part-per-billion (ppb) to percent level concentrations of multiple gases within a mixture. The Hound produces laboratory quality results in real-time using ultraviolet light absorption – similar to traditional infrared detectors, but features lower detection limits on many human health hazards and does not interfere with water vapor. All Hound...

  • Cerex - Model UV MiniHound Series - Portable Multi-Gas Analyzer

    Cerex - Model UV MiniHound Series - Portable Multi-Gas Analyzer

    The Cerex MiniHound series point gas detectors are portable multi-gas analyzers developed to detect part-per-billion (ppb) to percent level concentrations of multiple gases within a mixture. The MiniHound produces laboratory quality results in real-time using ultraviolet light absorption – similar to traditional infrared detectors, but features lower detection limits on many human health hazards and does not interfere with water vapor. All...

  • Fixed Mount Point Analyzers

  • Cerex - Model UV 3000C - Fixed Mount Multi-Gas Analyzer System

    Cerex - Model UV 3000C - Fixed Mount Multi-Gas Analyzer System

    The Cerex UV 3000C is a fixed mount multi-gas analyzer with internal sample cell. Available with an integrated twelve port multiplexer, the UV 3000C offers sequential zone monitoring of up to ten locations for leak detection, process monitoring or indoor air quality monitoring. Two ports are generally reserved for operator specified quality assurance audits. Continuous parallel sample acquisition reduces latency and for many applications the sample...