MegaSecur products

In order to ensure peace of mind and peace of mind in view of a possible flood, MegaSecur offers you the storm net to keep the barrier on the ground during strong winds. If you are installing in strong winds, MegaSecur has developed a system that is installed on the barrier and prevents it from moving even with winds of more than 90 km/hour, tested in a wind tunnel. This system is a small-mesh net tight enough to prevent strong winds from entering below this fabric and displacing the water barrier, but also, this net is sufficiently permeable to let water easily enter the barrier. water.

To ensure peace of mind and peace of mind in the event of a flood, MegaSecur offers a pumping kit specifically adapted to your needs. Equipped with a 2-inch (5 cm) outlet, the pump offered by MegaSecur is robust and designed specifically for wastewater work. Its flow rate is 250 liters per minute (66 GPM US). Its maximum water column is 39 feet / 12 M. It plugs into a 110 V outlet and requires 7.5 AMP. We have included a camlock fitting to facilitate its quick connection. For added safety, it is equipped with a long 22`-4`` (6.8 M) cord, which will prevent you from having to add an extension cord and will thus ensure that the connection of your installation will not end up under the water.

In order to ensure peace of mind and peace of mind in view of a possible flood, MegaSecur offers you the ballast roller to hold the barrier more firmly to the ground. The ballast roller has been designed to create a uniform weight over the entire length of the area to be covered while following the relief of the terrain. It is easy and quick to handle, as it has a sturdy handle. In addition, the ballast roller being permeable, no liquid can accumulate inside. It is reusable, ecological and UV treated. Very resistant to blows and abrasion, it is quick to deploy, clean, flexible and requires little storage space. The rolls cling together, drain well and dry quickly. They resist frost, are not prone to mildew and are easily cleaned with a simple watering.

With the Water-Plug, you can quickly remedy to overflow cesspools and sewers. Simply unfurl and place the Water-Plug on the cesspool to contain the overflow water. It is as simple as that! It is the water that holds back the water. Because of the conical form, the Water-Plug deploys automatically when water fills the system.

In order to ensure peace of mind and peace of mind in view of a possible flood, MegaSecur offers supports to help you maintain the barrier on a wall or simply to facilitate its movement. The side supports are necessary to hold the water barrier securely against a straight wall. For the WL-26 category, it is recommended to have 4 retaining brackets to properly retain the end of the barrier on the right. These brackets are universal for all our models and sold in pairs for both the left and right side.