Mena Water FZC products

The belt filter press is composed of two units, the pre-thickener and the sludge press. The pre-thickener performs the initial solid/liquid separation stage, taking sludge solids concentration from 0.5-3% up to 5-15%. AThe dewatering in the press occurs firstly in the low pressure zone, then in the wedge zone and finally in the high pressure zone where the filter cake is compressed between the perforated cylinder cloth and the main cloth. The discharged sludge cake can reach dry solid contents variable from of 18 to 30% depending on the sewage sludge. The belt press can be used for mixed fiber, biological, chemical sludge.

This package plants are completely automatic machines for sludge dewatering. Included are all functions like sludge conditioning, bag filling and draining cycles, controlled by an integral control panel. The fully packaged design of this machine provides a simple and rapid installation, which is of benefit to the installer and end-user. The bag also acts as a strong container for the transport of the dehydrated sludge to the disposal point.

Sludge Thickeners are widely used in many wastewater and water treatment plants. They are generally placed before filter presses, belt presses and centrifuges to achieve higher sludge concentration before final dewatering. Sludge thickeners are also used to increase the sludge concentration before biogas reactors, thus enabling the use of smaller biogas reactors. Other applications are to reduce the volume of sludge before being pumped into drying beds. This equipment can also be used to remove coarse material such as fibers in the textile Industry.