MESA Corrosion Control & Integrity products

Anode Sealing Caps seal the critical connection between the anode lead wire and the anode. The sealing cap provides stress relief at the wire connection. They seal and electrically insulate the end of the anode where the lead wire exits the anode. The anode sealing cap is the ideal solution to prevent premature failure of the anode typically caused by corrosion of the wire connection. Each cap is expanded to allow clearance for easy installation over the lead wire and the anode. A rubber based sealant is coated on the inside of the cap. The cap is heated and shrunk to fit tightly on the anode and the anode wire. During the heat shrink process, the cap shrinks to conform to the anode and wire while the sealant softens and bonds to their surfaces. After cooling, the cap remains durable and water tight. Anode sealing caps are sized to fit 2, 3 or 4 inch anodes.

Application: A non-metallic bow spring centralizer for applications such as gravel packed screens, water well casing, monitor wells, drop pipe, and pump installation plus Ground Engineering related applications such as piles, soil nails, anchors and sheathing installations. This model will fit casing and sheathing diameters from 58mm OD (2.28”) to in excess of 180mm OD (8”), and is available in three bow heights of 20mm (0.78”), 30mm (1.18”), and 50mm (2”).

Heavy duty design, Centers anode in the hole, Maintains spacing between anode and vent pipe, Increases anode life by ensuring backfill coverage