Refine by
Companies Equipment & Supplies
114 equipment items found
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
SHT-120 - Vibrating probe level sensor with 7.37” insertion length, 20 to 250V AC/DC, high temp probe assembly for maximum process temperature 480°F ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
3D acoustic level sensor RL - standard with 7.67” diameter horn, 20-32 VDC, 4-20 mA output, Modbus, and RS-485 communications. Determines the average volume of stored materials based on a 15º beam angle in silos up to 14’ diameter and 200’ tall. Unit comes with internal LCD display and 3DVision software. Hazardous location approved, FM listed for Class I, II, Division 1, ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
3D Level Scanner - M with extended temperature up to 365°F with 7.67” diameter horn, 20-32 VDC, 4-20 mA output, Modbus, and RS-485 communications. Accurate readings of level and volume of stored materials based on a 70º beam angle. Wider beam angle is appropriate for silos up to 45’ in diameter and 200’ tall, and where improved accuracy in smaller silos is required. ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster PRO Remote 75' Power Pac delivers exceptional installation versatility by positioning electronics up to 75 feet away from the sensing probe—perfect for challenging environments like high-vibration zones, elevated vessels, or hard-to-access areas. It includes versatile 115 VAC/230 VAC power, intuitive “Quick-Set” calibration, adjustable time delay, and PRO-Shield ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
SHT-140-X - Vibrating rod level sensor, 20 to 250V AC/DC, high temp probe assembly for maximum process temperature 480°F (250°C). Must add rod pipe ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
3DLevelScanner multi-scanner system controller with 3DVision software. The software processes the measurement data recorded by each of the scanners in the multi-scanner system in the silo, open bin, or warehouse. A special algorithm combines the data from the scanners in the system and provides general vessel information as well as volume, minimum and maximum level, distance ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Replacing BinMaster’s SHT-120, the VRX61 vibrating probe level sensor for high temperatures is designed for use in harsh processing environments up to 480°F ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BM-T Roll ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
6” x 1-1/4” Diameter Galvanized shaft ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VR-31 - Sanitary vibrating probe level sensor, 20 to 250V AC/DC, 11.81” insertion length, with a 2” stainless steel sanitary fitting for use with tri-clover style clamp. Process temp to 176°F ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BinMaster air pads are a cost-effective solution to many material flow problems. They are ideal for finely ground dry materials that tend to pack while in storage and then cling to the walls of the bin. Multiple air pads are installed intermittently along the bin wall and low pressure air is directed along the bin walls to ensure a continuous, even flow of material out of the bin. At just ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
CVR-600-HTL - Compact vibrating rod level sensor with 1” NPT and 6” insertion length, 20 to 250 VAC/DC, high temp probe assembly. for temperatures up to 300ºF (150ºC) with 2” temperature insulating lag ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
With a built-in 4-20 mA output and integrated keypad, the SmartBob AO level sensor automatically transmits data to a PLC each time it takes a ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Side mount extension for thick bin walls. Side mount the BMRX rotary through thick concrete walls using a 6”, 8”, or 12” extended drive shaft. This extension includes a protective shaft guard with a sealed bearing end to support the shaft and prevent material from packing in the extension and causing false alarms. Consult with a BinMaster expert to configure the ideal rotary for ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster ProCap I-3A Power Pac is designed for sanitary, point-level detection in food and dairy processing. Built to meet 3-A requirements, it ensures reliable performance while maintaining strict hygiene standards. A universal power supply, bright LED status light, and “Quick-Set” calibration make installation and operation simple. The unit offers DPDT relay output with ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
1-1/4” Galvanized NPT female coupler to attach guard pipes ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
3D Level Scanner - MV with 7.67” diameter horn, 20-32 VDC, 4-20 mA output, Modbus, and RS-485 communications. Accurate readings of level and volume of stored materials based on a 70º beam angle. Wider beam angle is appropriate for silos up to 45’ in diameter and 200’ tall, and where improved accuracy in smaller silos is required. Identical to the Model 3DLS-M, with the ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
CVR-600 - Compact vibrating rod level sensor with 1” NPT and 6” insertion length, 20 to 250 ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The SBR II 115 is a microprocessor-driven SmartBob II remote sensor with 115 VAC, a corrosion-resistant polycarbonate enclosure, and an air inlet port. It is hazardous location approved and C/US listed for Class II, Groups E, F, and G. The AO models do not have hazardous location ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
AB-MKO - Airbrator external mounting kit for oval-shaped opening. Constructed of zinc-plated carbon ...