Nuova Idropress S.p.A products

It is no longer a novelty but a technologic reality now affirmed, the Conical Pre-expander of Nuova IDROPRESS S.p.A. presented in 1998 and already manufactured in more than 200 models in only 15 years. The range of Nuova Idropress expanders usable both for moulding and for blocks include two “small” of 0,8 and 1,5 m3 volume available totally cone-shaped (capacity up to 1,5 ton / hour @ 20 g/l) and six “big” truncated cone with volumes usable variable from 2,0 up to 8,0 m3 (and capacity up to 5,8 ton / hour @ 20 g/l).

The Vertical Block Moulding Technology A direction opened by Nip way back in 1971 ! Suitable for Densities of 6 ÷ 80 kg/m³ (0.37 ÷ 5.0 lb/ft³) For Block size between 1,0 x 0,5 x 1,0 m (40 x 20 x 40 in) and 8,0 x 1,4 x 2,6 m (315 x 55 x 102 in).

Automated Cutting Lines for sheets High Customization to adapt to Customer Requirements. Available for block sizes up to 8,0 m (315 in) length x 1,5 m (59 in) width x 2,6 m (102 in) thick.

Standard configuration with moving belt (x axis) and up & down movable wire holding frame (y axis). Possible as well with block laid on a fixed frame and double movement (x & y axis) holding wires frame.

NUOVA IDROPRESS S.p.A. has realized and patented an innovative system for the tongue and grooving of the 4 sheet sides by means of hot wires. By being both long and short wires installed on the same rectangular frame which moves up & down (like a down-cutter) and horizontally at 45° it is definitively possible to calibrate properly the squareness and parallelism between the wires.

For internal scraps and eps waste collected outside Allowing to re-use the material (thanks to a proper treatment) in a profitable way

Vertical Presses for block pressing; Vertical layout machines for lower space requirements.