O.M.A.R. srl products

Self-cleaning PJ bag filters are made from modular interchangeable panels which are bolted together and used to treat very large quantities of dusty air.

Self cleaning PJ bag filters for high temperature fumes and gases are used to treat high quantities of dusty air and are made from carbon steel plate pannels which are welded together. They are completed by a longitudinal  settling chamber for improved flow distribution along the entire filtering section. Compressed air impulse bag cleaning system.

Wet reducers which use multi-stage neutralisation technology with static packing media (acid-basic-oxidative) for the removal of malodorous substances.

Single stage Venturi scrubbers are capable of treating low concentrations of dust which enters the Venturi at high speeds where it is mixed with washing liquid to weigh down dust particles for decantation at the bottom of the tub.

Floating bed scrubbers are mostly used in the bio-filtering sector as humidifiers. These wet reducers are unique in that they contain special filling chambers and enable high crossing speeds through them. This design enables polypropylene spheres to float, resulting in the abatement of dust and self-cleaning of packing media. An underlying tank collects slurry and a recirculation pump (positioned in an external tank) guarantees correct washing solution input. They can be made from plastic material or AISI 304 stainless steel sheet, based on the type of pollutant requiring treatment.

Biofilters are used to deodorise malodorous substances which are normally present in the waste treatment sector.
They are made in concrete or aluminium/stainless steel. Inside, biofiltering material of different sizes, consisting of erica/peat, etc. is homogeneously distributed and activated by bacterial flora. Biomodules or plastic grilles supported by feet support biofiltering material. The humidity of inbound air flow is maintained by a surface bed irrigation system.

Fans for industrial use, for small and large airflows at medium to low pressures, made in painted steel, special steel or stainless steel with different profile blades, suitable for clean air conveyance and in some cases also dusty air. Motor-impeller transmission with belt or sheaves or directly coupled in the case of motor managed with frequency variator.

Ventilators for industrial use for medium and large airflows and low pressure, made in painted steel, special steel or stainless steel; for the conveyance of clean air and especially for the ventilation of interiors. Motor-impeller transmission with belt or sheaves or directly coupled.

Noise pollution caused by operating machinery or industrial ventilators can be reduced by installing sound absorbing walls. Insulating panel thickness and sandwiched layer composition determines noise absorption performance and to what extent noise impact from the polluting source is actually reduced. The construction of easy to move panels is also possible, suitable for maintenance/ inspections.

Suction hoods are capturing systems used in all cases when localised aspiration is not possible directly over the area in which pollutant is generated.