Pentek Inc.

37 products found

Pentek Inc. Products

  • HEPA Vacuums

  • Compact - Man-Portable HEPA Vacuum Vac

    Compact - Man-Portable HEPA Vacuum Vac

    The Compact Vac is designed to support one shrouded power tool approximately ten feet away from the vacuum system. The Compact Vac utilizes an air venturi design powered by a compressor,  eliminating moving parts and motors which may burn out.

  • Model A10004900 - Wet Separator

    Model A10004900 - Wet Separator

    Pentek waste Transfer Lids helps move liquids and semi-liquid materials continuously through your  waste collection system without taxing its operating performance envelope. In particular, VAC-PAC®  systems are designed to operate in continuous, maintenance free service for extended periods of time; up to one (1) year between service intervals. This high system availability and low operational costs of  the VAC-PAC® system is...

  • Knock-Out - Vacuum Waste Collection Drum

    Knock-Out - Vacuum Waste Collection Drum

    The Pentek Knock-Out Drum is the perfect accessory to your HEPA vacuum waste collection scheme. When inserted between the waste and the VAC-PAC, you are assured of trouble-free, automated operation with no downtime and minimum maintenance cost.

  • Power Tools

  • Pentek - Roto-Peen Scaler

    Pentek - Roto-Peen Scaler

    Pentek’s Roto-Peen Scaler with localized exhaust is designed to remove hazardous protective coatings (including lead-based paints) from steel, concrete, brick and wood in an environmentally safe manner. The Roto-Peen Scaler is designed to operate independently or in conjunction with Pentek’s full suite of integrated decontamination equipment, including Corner-Cutter needle guns and the VAC-PAC high performance self-drumming waste...

  • Pentek Corner-Cutter - For Dustless Cleanup of Concrete and Steel Surfaces

    Pentek Corner-Cutter - For Dustless Cleanup of Concrete and Steel Surfaces

    The Corner-Cutter is designed to remove lead-based paints, radioactivity and other hazardous contaminants from both steel and concrete surfaces in an environmentally safe manner. Pentek developed the Corner-Cutter to scarify walls, joints, ceilings, stairs, girders, pipes, and other areas which are inaccessible to our MOOSE and SQUIRREL-III surface preparation products.

  • Pentek SQUIRREL - Model III - Pneumatically Operated Scabbler

    Pentek SQUIRREL - Model III - Pneumatically Operated Scabbler

    Pentek’s SQUIRREL-III pneumatically operated scabbler scarifies concrete floors and slabs in an environmentally safe manner. The SQUIRREL-III is designed to tackle small jobs and to get into tight spaces near corners, wall/floor joints, floor penetrations, equipment pedestals, steps, and under protruding equipment. SQUIRREL-III is designed to operate as an independent unit in conjunction with other equipment in the Pentek family of products,...

  • Pentek SQUIRREL - Model II - Single Piston, Pneumatically Driven Scabbler

    Pentek SQUIRREL - Model II - Single Piston, Pneumatically Driven Scabbler

    The SQUIRREL-II is a single piston, pneumatically driven scabbler with localized exhaust that safely removes radioactivity, PCB’s, chemical residues and other hazardous materials from cracks in concrete floors and slabs. This manually operated scabbler has been specifically designed to follow random cracks in concrete floors and slabs in an environmentally safe manner with a unique vacuum flow design that offers high efficiency control over...

  • Pentek SQUIRREL - Model I - Single Piston, Air-driven Scabbler

    Pentek SQUIRREL - Model I - Single Piston, Air-driven Scabbler

    Pentek’s SQUIRREL-I is a single piston, air-driven scabbler with localized exhaust that safely removes PCBs, radioactivity, lead-based paints, chromium and other hazardous materials from flat concrete surfaces. This manually operated scabbler scarifies concrete floors and slabs in an environmentally safe manner with a unique vacuum flow design that provides high efficiency control over dust, debris and airborne...

  • Pentek 3M - Heavy Duty Roto-Peen Flaps

    Pentek 3M - Heavy Duty Roto-Peen Flaps

    The 3M Heavy Duty Roto Peen Flap consists of tungsten carbide shot attached to a patented flexible, heavy-duty material. The Heavy Duty Roto Peen Flaps, when operated via the Pentek Roto-Peen Scaler, mechanically fractures surface coatings in a safe and controlled manner. Because the shot remains captive to the tool, safety margins and dust control are optimized.

  • Pentek 3M Roto-Peen - Model RP-ZF - Flap Wheel Assembly

    Pentek 3M Roto-Peen - Model RP-ZF - Flap Wheel Assembly

    Roto-Peen RP-ZF flap wheel assembly. Use for cleaning and descaling operations. Applicable for landing gear assemblies, wing structures, helicopter rotor hubs, jet engine support members, peening after grinding, peening before plating, peening of surfaces subject to stress corrosion, peen straightening, peen forming, weld heat affect zone bond testing.

  • Remote Systems

  • Pentek WallWalker - 2- and 3-Dimensional Working Robots

    Pentek WallWalker - 2- and 3-Dimensional Working Robots

    Pentek has developed and successfully demonstrated a new robotic work module deployment system (vertical and horizontal locomotion technology) called the WallWalker to fully automate hazardous cleaning work. This technology makes it possible to deploy completely automated work modules to large vertical and horizontal surfaces, while eliminating scaffolding, respiratory protection, and other safety equipment...

  • Pentek MOOSE - Scabbling Robot

    Pentek MOOSE - Scabbling Robot

    Pentek’s remotely operated MOOSE is designed to scarify large concrete floors and slabs in environments which require stringent control of airborne contamination and debris while providing exceptional production rates. Applications include the safe and efficient collection of radioactive materials, PCB’s, chemical residues, heavy metals, and other hazardous material from manufacturing and...

  • High Performance Filters

  • Pentek - Model S1 Series - Pleated Cellulose Sediment

    Pentek - Model S1 Series - Pleated Cellulose Sediment

    Pleated design maximizes dirt-holding capacity. Designed for general water filtration purposes. Recommended for chlorinated water supplies. Economically priced. Nominal 20-micron rating. Filter Media: Resin-Impregnated  ellulose. End Caps: Vinyl Plastisol. Core: Polypropylene. Netting: Polyethylene. Temperature Rating: 40˚F to 145˚F (4.4˚C to 62.8˚C).

  • Pentek - Model R Series  - Pleated Polyester

    Pentek - Model R Series - Pleated Polyester

    Pleated design maximizes dirt-holding capacity. Versatile and reusable, allowing for a variety of uses. Durable polyester media. Nominal 30-micron rating (R-30) and nominal 50-micron rating (R-50). Filter Media: Non-Woven Polyester. Core: Polypropylene. End Caps: Vinyl Plastisol. Temperature Rating: 40˚F to 125˚F (4.4˚C to 51.7˚C).

  • Polydepth - Polypropylene Sediment Filter

    Polydepth - Polypropylene Sediment Filter

    Quality polypropylene filter media. Will not impart taste, odor or color. Superior chemical resistance. Compatible with a wide range of industrial filtration. Available in a wide range of micron ratings and lengths. Filter Media: Polypropylene. Temperature Rating: 40˚F to 175˚F (4.4˚C to 79.4˚C).

  • Pentek - Model P Series - Spun-Bonded Polypropylene

    Pentek - Model P Series - Spun-Bonded Polypropylene

    Manufactured from pure 100% polypropylene. Spun fibers form a true gradient density from outer to inner surfaces. Filter Media: Polypropylene Fibers. Temperature Rating: 40˚F to 145˚F (4.4˚C to 62.8˚C).

  • Pentek - Model DGD Series  - Dual-Gradient Density

    Pentek - Model DGD Series - Dual-Gradient Density

    Manufactured from 100% pure polypropylene. Two separate gradient density layers enhance cartridge performance. Three times the dirt-holding capacity of similar-sized sediment cartridges. Filter Media: Polypropylene. Temperature Rating: 40˚F to 145˚F (4.4˚C to 62.8˚C).

  • Pentek - Model CP Series - Pleated Cellulose Polyester

    Pentek - Model CP Series - Pleated Cellulose Polyester

    Special formulation of resin-impregnated cellulose and polyester fibers. Provides higher wet strength than regular cellulose cartridges. Minimal unloading and media migration. Filter Media: Cellulose Polyester. Core: Polypropylene.End Caps: Vinyl Plastisol. Temperature Rating: 40˚F to 125˚F (4.4˚C to 51.7˚C).

  • Pentek - Model C Series  - Dual Purpose Powdered-Activated Carbon

    Pentek - Model C Series - Dual Purpose Powdered-Activated Carbon

    Economically priced. Provides sediment filtration and bad taste & odor and chlorine taste & odor reduction. High dirt-holding capacity. Available in three sizes and two micron ratings. Filter Media: PAC Impregnated Cellulose. End Caps: Polypropylene (C8) Vinyl Plastisol (C1 and C2). Netting: Polyethylene Core: Polypropylene. Backing: Polyester (C8) Cellulose Polyester (C1 and C2). Gaskets: Buna-N (C8). Temperature Rating: 40˚F to...

  • Pentek - Model HFCP Series - Pleated Cellulose Polyester

    Pentek - Model HFCP Series - Pleated Cellulose Polyester

    Special formulation of resin-impregnated cellulose and polyester fibers. Provides higher wet strength than regular cellulose paper cartridges. Minimal unloading and media migration. Recommended for chlorinated water supplies. Filter Media: Cellulose Polyester. Core: Polypropylene. End Caps: Polypropylene. Netting: Polyethylene. Gaskets: Buna-N. Temperature Rating: 40˚F to 165˚F (4.4˚C to 73.8˚C).

  • Pentek - Model CW/WP Series - Polypropylene Wound

    Pentek - Model CW/WP Series - Polypropylene Wound

    String-wound design reduces fine sediment from a variety of fluids, Withstands temperatures up to 165˚F (73.9˚C), Economically priced, Nominal 10-, 30-, 50-micron rating (CW) and nominal 5-, 30-micron rating (WP), Filter Media: Polypropylene Fiber Cord, Core: Polypropylene, Temperature Rating: 40˚F to 165˚F (4.4˚C to 73.9˚C),

  • Pentek - Model CRE Series - Ceramic

    Pentek - Model CRE Series - Ceramic

    Specially designed for cyst reduction and fine sediment filtration applications. 1/2″ thick ceramic wall allows for many cleanings, extending cartridge life. Nominal 1-micron rating. Filter Media: Sintered Ceramic. End Caps: Thermoset Polymeric. Gaskets: Buna-N. Temperature Rating: 40˚F to 125˚F (4.4˚C to 51.7˚C).

  • Pentek - Model RFC Series - Radial Flow Carbon

    Pentek - Model RFC Series - Radial Flow Carbon

    BB Cartridges are ideal for point-of-entry (POE) and other high flow rate applications. Unique design reduces carbon fines in filtered water. Available in a wide variety of sizes. Filter Media: Granular Activated Carbon. End Caps: Polypropylene. Outer Shell: Polyethylene. Inner/Outer Wrap: Polypropylene. Gaskets: Buna-N. Temperature Rating: 40˚F to 125˚F (4.4˚C to 51.7˚C).

  • Pentek - Model NCP Series - Non-Cellulose Carbon-Impregnated Pleated

    Pentek - Model NCP Series - Non-Cellulose Carbon-Impregnated Pleated

    Non-cellulose media resists bacterial attack. Provides sediment filtration and bad taste & odor and chlorine taste & odor reduction. Pleated for maximum dirt-loading capacity. Nominal 10-micron rating. Filter Media: Pleated Carbon-Impregnated Polyester. End Caps: Vinyl Plastisol. Core: Polypropylene. Netting: Polyethylene. Temperature Rating: 40˚F to 125˚F (4.4˚C to 51.7˚C).

  • Pentek - Model GAC Series - Granular Activated Carbon

    Pentek - Model GAC Series - Granular Activated Carbon

    Designed for maximum adsorption. Post-filter to reduce carbon fines. Available in a variety of sizes and flow rates. Filter Media: Granular-Activated Carbon. End Caps: Polystyrene. Post-filter: Spun Polypropylene. Outer Casing: Polystyrene. Expansion Pad: Polypropylene. Gaskets: Buna-N (top) Santoprene (bottom). Temperature Rating: 40˚F to 125˚F (4.4˚C to 51.7˚C).

  • Pentek - Model CC Series - Coconut Shell Granular Activated Carbon

    Pentek - Model CC Series - Coconut Shell Granular Activated Carbon

    Greater VOC reduction than standard GAC cartridges. Post-filter to reduce carbon fines. Available in two sizes. Filter Media: Granular Activated Carbon. End Caps: Polystyrene. Core: Spun Polypropylene. Outer Casing: Polystyrene. Expansion Pad: Polypropylene. Gaskets: Buna-N (Top) Santoprene (Bottom). Temperature Rating: 40˚F to 125˚F (4.4˚C to 51.7˚C).

  • Pentek - Model CGAC-10 - Granular Activated Carbon

    Pentek - Model CGAC-10 - Granular Activated Carbon

    Advanced carbon media for chloramine taste & odor reduction. Effective bad taste & odor, chlorine taste & odor, and chloramine taste & odor reduction. Designed for maximum adsorption. Post-filter to reduce carbon fines. Filter Media: Advanced Carbon. End Caps: Polystyrene. Post-filter: Spun Polypropylene. Outer Casing: Polystyrene. Expansion Pad: Polypropylene. Gaskets: Buna-N (top) Santoprene (bottom). Temperature Rating: 40˚F to...

  • Pentek - Model TSGAC-10 - Specialty Granular Activated Carbon/Phosphate

    Pentek - Model TSGAC-10 - Specialty Granular Activated Carbon/Phosphate

    Effective bad taste & odor and chlorine taste & odor reduction. Phosphate crystals reduce rust stains and scale deposits. Designed for maximum adsorption. Post-filter to reduce carbon fines. Filter Media: Granular-Activated Carbon Hexametaphosphate Crystals. End Caps: Polystyrene. Post-filter: Spun Polypropylene. Outer Casing: Polystyrene. Expansion Pad: Polypropylene. Gaskets: Buna-N (top) Santoprene (bottom). Temperature Rating: 40˚F to...

  • Pentek - Model CRFC - 20 - Radial Flow Carbon

    Pentek - Model CRFC - 20 - Radial Flow Carbon

    Advanced carbon media for chloramine taste & odor reduction. Effective bad taste & odor, chlorine taste & odor, and chloramine taste & odor reduction. Designed for maximum adsorption. Post-filter to reduce carbon fines. Filter Media: Advanced Granular Activated Carbon. End Caps: Polypropylene. Outer Shell: Polyethylene. Inner/Outer Wrap: Polypropylene. Gaskets: Buna-N. Temperature Rating: 40˚F to 125˚F (4.4˚C to...

  • Pentek - Model EPM Series - Modified Epsilon Carbon-Briquette

    Pentek - Model EPM Series - Modified Epsilon Carbon-Briquette

    Economically priced. High porosity maximizes utilization of the carbon block. Greater chlorine taste & odor reduction capacity than competitive 10-micron carbon blocks. Nominal 10-micron rating. Filter Media: Bonded PAC. End Caps: Polypropylene. Netting: Polyethylene. Outer Wrap: Polyolefin. Gaskets: Buna-N. Temperature Rating: 40˚F to 180˚F (4.4˚C to 82.2˚C).

  • Pentek - Model EP Series - Carbon-Briquette

    Pentek - Model EP Series - Carbon-Briquette

    High-dirt-holding tolerance maximizes utilization of the carbon block. Greater chlorine taste & odorreduction capacity than competitive 10-micron carbon blocks. Nominal 5-micron rating. Filter Media: Bonded PAC. End Caps: Polyethylene. Netting: Polyethylene. Inner/Outer Wrap: Polyolefin. Gaskets: Buna-N. Temperature Rating: 40˚F to 180˚F (4.4˚C to 82.2˚C).

  • Pentek - Model CBC Series - Carbon-Briquette

    Pentek - Model CBC Series - Carbon-Briquette

    High capacity chlorine taste & odor reduction. Reduces bad taste & odor, chlorine and certain VOCs from drinking water. Effective at filtering Cryptosporidium and Giardia cysts. Nominal 0.5-micron rating. Filter Media: Bonded PAC. End Caps: Polypropylene. Inner/Outer Wraps: Polyolefin. Netting: Polyethylene. Gaskets: Buna-N. Temperature Rating: 40˚F to 180˚F (4.4˚C to 82.2˚C).

  • Pentek - Model CBR2 Series - Carbon-Briquette Multimedia

    Pentek - Model CBR2 Series - Carbon-Briquette Multimedia

    Highly effective chlorine taste & odor reduction through more than 20,000 gallons. Lead reduction through 2000 gallons. 99.95% reduction of Cryptosporidium and Giardia cysts. Nominal 0.5-micron sediment filtration. Filter Media: Bonded PAC. End Caps: Polypropylene. Outer Wrap: Polyolefin. Netting: Polyethylene. Gaskets: Buna-N. Temperature Rating: 40˚F to 180˚F (4.4˚C to 82.2˚C).

  • Accessories & Spare Parts

  • Pentek - Model VP-090D - Pallet Dolly

    Pentek - Model VP-090D - Pallet Dolly

    The Pentek VP-090D Pallet Dolly is a lightweight, mobile platform. It is  equipped with six (6) tapered rollers positioned with three (3)  rollers on each side, aligned to the direction of travel.

  • Pentek - Pentek System

    Pentek - Pentek System

    Power 6 tools with 200ft vacuum hoses using a single VAC-PAC. The Pentek System is a fully integrated solution including everything you need for safe remediation of lead paint, concrete or other hazardous materials from contaminated surfaces.