PEX Universe products

300ft roll of 1/2` PEX Tubing with Oxygen Barrier for use in radiant heating applications. Meets/exceeds ASTM F876/877, CSA B137.5, DIN 4726 standards. Certified for use in radiant floor heating applications. UPC listed by IAPMO. PPI pressure rated at: 79psi @ 200F, 100psi @ 180F, 160psi @ 73F. Packing: Box.

1/2` PEX adapters are included by default. For other size adapters (free upgrade) make a note at checkout. 2-branch, Premium Radiant Heat Manifold Set with 1/2` PEX adapters (Supply and Return pair). Pre-assembled, pressure tested and comes with everything shown on the picture, including 1/2` PEX manifold adapters. SSM102 set is typical for areas with a total of 450 - 550 sq. ft of space, when used together with 1/2` PEX tubing (installed 9 - 12` on centers).

PEX Clamp Tool is also known as PEX Cinch Tool and is used together with Stainless Steel PEX Clamps (Cinch Clamps) of appropriate sizes. A single PEX clamp tool is compatible with PEX clamps of all sizes from 3/8` to 1` and does not require additional tools or any jaw changes. Comes factory pre-calibrated and does not need any adjustment. PEX Clamp Tool features a ratcheting, mistake-proof mechanism that prevents tool jaws from opening while the connection is being done. This saves the need for gauging and checking connections for errors. PEX cinch tool is compatible with ASTM F876/877 PEX-a, PEX-b & PEX-c tubing types (Bow, Viega, Uponor, Everhot, Zurn, Nibco, Heatlink, etc.) and crimp style PEX fittings (brass or poly).

PEX Decrimping Tool is used to remove copper crimp rings from the PEX connections that were made improperly. Features a fast-switch knob for 1/2` and 3/4` PEX tubing sizes. Other sizes can be calibrated with a crescent wrench (not included). Durable stainless steel construction with rubber grip handles. Everhot PXT3101 model is a direct replacement for Apollo 69PTKD0009.

PEX Crimp tool for use with 1/2` PEX tubing, fittings and copper crimp rings. Includes a 1/2` PEX go-no-go gauge tool. This model is well suited for PEX installation in confined spaces. Overall length is 10.5`.

Peter Mangone RB-6 Clip Gun (Pneumatic ) allows for fast and precise PEX tubing installation. It can be used for above floor or subfloor applications in radiant floor heating, as well as potable water plumbing systems. The RB-6 PEX clip gun shoots safe and strong polyethylene clips, that firmly secure the tubing without damaging it. The `hammer head` of the pneumatic tool repeatedly strikes the two nails of the RB Clip until they are driven 5/8` into the wood. The installation of pipe will be faster, easier and will last longer. Peter Mangone RB-6 Clip Gun is designed to hammer in the nails of the RB Clip with the power of an air compressor. The clip fastens the tubing onto the wood effortlessly and perfectly. Unlike majority of other pneumatic tools, the RB-6 is lightweight and easy to use. This makes it especially comfortable to use overhead, such as in `staple up` radiant heating installations, where tubing is secured to the bottom of the subfloor.

Brass PEX Elbows provide a sharp, 90-degree turn where needed. These PEX fittings are crimp style and manufactured to ASTM F1807 standard. Compatible with Crimp or Clamp (Cinch) connection systems.

This category features the following Little Giant Utility Pumps and Transfer Pumps: 360 series are a double-duty utility and transfer pumps. 360 and 360S models are non-submersible utility pumps for use in light-duty applications, such as filling or dewatering aquariums, water beds, water heaters or simply transferring water to an RV. Little Giant UPSP-5 model is a non-submersible utility/transfer pump, which can be used for light and medium duty applications such as dewatering flooded basements, quick draining of water heaters, as well as basic irrigation uses such as watering lawns and gardens, boosting water pressure for washing vehicles, sidewalks, etc.

For the most basic, cost-effective air filtration needs, Honeywell F100 whole-house media air cleaners are the optimal solution. Honeywell F100 series air cleaners are up to 14 times more effective than a typical furnace filter (1` thick) and capture as mush as 96% of airborne particles, such as dust, smoke, pet dander and large mold spores. These units feature MERV 11 rating, easy filter replacement (every 6-12 month) and compatibility with most gas, electric and oil forced air furnaces and air conditioning systems.