Refine by
Binmaster Companies Equipment & Supplies
114 equipment items found
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VF-92 - Vibrating fork level sensor with 316L stainless steel 5.91” tuning fork with hanging cable extension. Available in lengths up to 240 ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster PRO Remote 25' 230 VAC Power Pac provides unmatched installation flexibility by allowing electronics to be mounted up to 25 feet away from the sensing probe—perfect for elevated or hard-to-reach locations. Powered by 230 VAC, it features intuitive “Quick-Set” calibration, an adjustable time delay, and PRO-Shield technology to reduce buildup interference and ensure ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VR-21 - Preconfigured vibrating probe level sensor, 20 to 250V AC/DC, 7.37” insertion length, process temp to 176°F (80°C), triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, LED status indicator light. Ordinary ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
IECEx/ATEX 3D Level Scanner - MV with 7.67” diameter horn, 20-32 VDC, 4-20 mA output, Modbus, and RS-485 communications. Accurate readings of level and volume of stored materials based on a 70º beam angle. Wider beam angle is appropriate for silos up to 45’ in diameter and 200’ tall, and where improved accuracy in smaller silos is required. Identical to the Model 3DLS-M, ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Extended rotary protects against overfilling. Vertical extensions are used for top-mounted BMRX rotaries to get high-level alerts. Custom extensions are available up to 144”. Top-mounted, vertically oriented extensions measure further down into the bin to prevent overfilling or protect valuable continuous level sensors at the top of the bin. Consult with a BinMaster ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
3D Level Scanner-MVL with extended temperature up to 365°F is for use in multiple scanner systems that include the 3D visualization feature. It features a 7.67” diameter horn, 20-36 VDC, 4-20 mA output / Hart protocol, and RS-485 communications. When used in a multi-scanner system, it provides accurate readings of level and volume for stored materials based on two or more synchronized ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
IECEx/ATEX 3D acoustic level sensor RL - standard with 7.67” diameter horn, 20-32 VDC, 4-20 mA output, Modbus, and RS-485 communications. Determines the average volume of stored materials based on a 15º beam angle in silos up to 14’ diameter and 200’ tall. Unit comes with internal LCD display and 3DVision software. Hazardous location approved for European Union and global ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The VRX51 vibrating probe level sensor with flexible cable extension now includes a bright, built-in LED status indicator for monitoring bulk inventory levels and plugged chutes. The light can easily be seen from afar, appearing as red or green, and changing color based on if material is or is not covering the probe and damping its ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The 18” shaft with 316 SS paddle is used in most applications. As the material builds up from below, it pushes the paddle, tilting the unit. When the unit reaches a 15 degree tilt, it activates the switch. ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
SHT-120 - Vibrating probe level sensor with 7.37” insertion length, 20 to 250V AC/DC, high temp probe assembly for maximum process temperature 480°F ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BinMaster air pads are a cost-effective solution to many material flow problems. They are ideal for finely ground dry materials that tend to pack while in storage and then cling to the walls of the bin. Multiple air pads are installed intermittently along the bin wall and low pressure air is directed along the bin walls to ensure a continuous, even flow of material out of the bin. At just ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
6” x 1/4”Ø Galvanized shaft extension, includes paddle ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VF-93 - Vibrating fork level sensor with 316L stainless steel 5.91” tuning fork with rod extension. Available in lengths up to 120 ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Measure levels of solids or liquids with the NCR-86 with a plastic horn antenna. Precise to ≤1 mm at distances up to 393 feet. An optional swivel mount provides aiming flexibility. Operates accurately in excessive dust, hot steam, and extreme ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster ProCap II-3A Power Pac elevates sanitary point-level detection with precision and ease, tailored for stringent food and dairy processing environments. Featuring a 115/230 VAC selectable power design, bright LED status indicator, and hassle-free “Quick-Set” calibration, it ensures rapid installation and intuitive monitoring. Its DPDT relay output with selectable fail-safe ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Want more information about what rotary options to order? Get more information in the Rotary Configuration Guide and Rotary Paddle Selection Guide. BinMaster’s BMRX-300 rotary level switch is the first to feature a highly-visible, built-in LED indicator light. Easily seen from a distance, the bright LED changes from green to red when the paddle stops turning when the bin is full or empty. ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster ProCap I-3A Power Pac is designed for sanitary, point-level detection in food and dairy processing. Built to meet 3-A requirements, it ensures reliable performance while maintaining strict hygiene standards. A universal power supply, bright LED status light, and “Quick-Set” calibration make installation and operation simple. The unit offers DPDT relay output with ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VR-90 - Vibrating probe level sensor with 4.92” buildup resistant round ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
1/4” SS NPT female coupler to attach paddle to shaft extensions or shaft extensions ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
3D Level Scanner - M with extended temperature up to 365°F with 7.67” diameter horn, 20-32 VDC, 4-20 mA output, Modbus, and RS-485 communications. Accurate readings of level and volume of stored materials based on a 70º beam angle. Wider beam angle is appropriate for silos up to 45’ in diameter and 200’ tall, and where improved accuracy in smaller silos is required. ...