Polygon-Auto LLC products

Flocet self-cleaning filter is designed for installation on the suction system of the pivot with water extraction from the channel with capacity up to 450 CBM/hr. The filter allows extraction of water from concrete and other channels, protect from mud and mechanical contamination, performing self-cleaning with the source water.

Application Designed to stabilize and reduce pressure in the water supply network, thereby protecting pipeline and equipment connected to it from high pressure. Operating principle Closed upward flow of water presses on the outer chamber of the hose, brings the hose into hydraulic balance and closes the flow By pressing of the sleeve on the center saddle. While opened water pressure is released from the sleevSand can become a serious problem for irrigation systems for plugged and worn-out sprinklers can influence the whole system’s performance. Centrifugal force is used for removal of sand, granulated materials and scale from the pumped water, thus extending the service life of joints, sprinklers and booster pumps. Sand separator removes 98% of all sand particles up to 74 microns with relative density 2,6 and more in one pass. chamber, allowing the valve to open.

The POLIGON-AVTO company produces a Dy-200 drip irrigation filter with an automatic flushing system with the following technical characteristics:

The sand trap is an automatic flushing device that effectively cleans sand and rust from your system at the beginning and end of each watering cycle.

Chemical check valves are used to prevent the backflow of chemically treated water from irrigation systems to the source of water. It is installed to inject a chemical with the help of the injection pump that pumps it into the irrigation system. Silent, spring-loaded check valve is extremely efficient. There is also a built-in vacuum valve to arrange air outflow and vacuum discharge when the flow stops, and also low pressure drainage to arrange water discharge at the inlet side of the check valve. Maximum pressure: 10 bar (1.0 MPa).

Designed for installation on the suction system of pump stations with a capacity of up to 450 CBM/hr. Allows water intake from shallow depths of surface water body, prevent mud and mechanical contamination from entering, scare away young fish and performs self-cleaning with water. Licensed as a fish protection device by the State Fisheries Agency of Ukraine.

Filter is designed for the installation on suction system of pump stations with capacity up to 350 CBM/hr. Allows to prevent mechanical contamination (stones, branches, large leaves, etc.) from entering the pump station water intake system. Complete with check valve to prevent water leakage from the pump station suction system.

Pipeline with quick-release couplings is designed for building new and support of existing irrigation systems, spraying activities in agriculture, and also for the prompt water distribution from the source to the various points of use of water. The pipeline enables the solution of problems in complex and isolated locations comprising the convenient tool for temporary and seasonal pipelines installations due to its ease in assembling and disassembling at the site. Pipeline with quick-release couplings may be used for diversion of ground and sewage waters, prompt water distribution in fire containment activities, mining industry, open pits, mines, forestries.