ResinTech Inc products

ResinTech ASM-10-HP is a chloride form arsenic selective hybrid anion exchange resin. ASM-10-HP has hydrated iron oxide monoatomically dispersed throughout the polymer. It captures arsenate first by ion exchange and then by absorption into the iron oxide hybrid. ResinTech ASM-10-HP is intended for arsenic removal from potable water, and can also be used as an ion exchanger for removal of uranium and other trace level contaminants.

ResinTech BSM-50 is a borate form  hybrid anion resin selective for silica and antimony. BSM-50contains hydrated iron oxide crystals monatomically dispersed throughout the polymer. It absorbs antimony, silica, and other contaminants by a combination of ion exchange and adsorption. ResinTech BSM-50 is intended for removing trace levels of antimony and can also be used to remove silica from borated process waters. BSM-50 is supplied in the borate form.

ResinTech ASM-125 is a chloride form gel hybrid anion resin selective for silica and antimony. ASM-125 contains hydrated iron oxide crystals monoatomically dispersed throughout the polymer. It absorbs antimony, silica, and other contaminants by a combination of ion exchange and adsorption. ResinTech ASM-125 is intended for use removing trace levels of antimony and can also be used to remove silica from process waters. ASM-125 is supplied in the chloride form.

ResinTech IT-1 is an inert bead form resin designed with a bead size and specific gravity in between that of active cation and anion resins. ResinTech IT-1 is intended for mixed bed demineralizers where a barrier layer of inert resin is desired surrounding the interface collector after backwash. IT-1 is supplied in an inert form.

ResinTech IT-1 is an inert low density support media for packed beds. IT-5 is significantly less dense than water and is rectangular in shape. IT-5 is intended to float above the active resin in packed bed ion exchangers. ResinTech IT-5 acts as an upper support bed and prevents resin fines from clogging distributer screens. IT-5 is supplied in an inert form.

ResinTech SIR-100-HP is a chloride form macroporous nitrate selective strong base anion resin. SIR-100-HP has a unique functionality that increases selectivity for nitrate and decreases selectivity for sulfate. This results in higher operating capacity, lower leakage, and freedom from nitrate dumping if operated past sulfate break. SIR-100-HP is intended for all nitrate removal applications, and can also be used to remove perchlorate. SIR-100-HP is supplied in the chloride form.

ResinTech SIR-110-HP is a chloride form PFAS, nitrate and perchlorate selective strong base anion resin. SIR-110-HP has unique functionality that greatly increases selectivity for nitrate while greatly decreasing the interference from sulfate ions. ResinTech SIR-110-HP has the highest possible selectivity for perchlorate when compared to other similar resins. SIR-110-HP is intended for all perchlorate and PFAS removal applications, and where the highest possible affinity for nitrate is desired. SIR-110-HP is supplied in the chloride form.

ResinTech SIR-150 is a macroporous borate selective weak base anion resin. SIR-150 has unique functionality which makes it extremely selective for borate. Resi nTech SIR-150 is intended for all borate removal applications including potable water, ultrapure water, and boron removal from concentrated brines. SIR-150 is supplied in the free base form.

ResinTech SIR-200 is a hydrogen form macroporous mercury selective weakly acidic cation resin. ResinTech SIR-200 has unique functionality that makes it selective for mercury and other heavy metals. SIR-200 is also very selective for noble metals when present as cations. SIR-200 is intended for mercury removal and for removal/recovery of various precious metals. ResinTech SIR-200 is supplied in the hydrogen form.

ResinTech SIR-300 is a sodium form macroporous chelating weak acid cation resin. SIR-300 has unique chelating functionality and is able to remove divalent transition metals preferentially to alkaline earth metals such as calcium. ResinTech SIR-300 is intended for removal of low to moderate concentrations of heavy metals from waste streams. SIR-300 is supplied in the sodium form, can be special ordered in the hydrogen form (as SIR-300-H), or in the buffered form (as SIR-300 pH ADJ).