RMA Fiventures Asia-Pacific Pte Ltd. products

During pigging operation, the PIG will be launched/received by the PIG Launcher/Receiver. The PIG Launcher/Receiver is designed mechanically with ASME SEC VIII Div 1 latest edition, U Stamp, and provided with Quick Opening Enclosure (QOC). The QOC shall come with mechanical safety interlock to prevent opening it when the PIG Launcher/Receiver is pressurized. PIG signaller with limit switch is provided for remote monitoring of PIG arrival to PIG Receiver. Bi-Directional PIG Trap which can launch and receive PIG can be supplied.

The inlet ESD valve is designed to provide the automatic isolation of downstream facilities in the pipeline system, in the event of emergency. Ball valve with failed close, spring return pneumatic actuator is considered in design for remote operation and automatic shutdown. Other type of actuator can be available such as electric motorized, gas over oil, etc. PLC based Emergency Shutdown System Panel with Redundant CPU (SIL-3 rated), fault tolerant and fail-safe system is provided to perform the shutdown logic can be provided.

The gas/LNG metering streams can be configured in the multiple operating and stand-by configuration. The ultrasonic/Coriolis/turbine/orifice flow meters are used in each stream for accurate flow measurement. Meter calibration at certified flow laboratory can be included under RMA’s Germany facility. Gas chromatograph/Analyzer system can be supplied for representative sampling and measurement of gas/LNG composition.

Multiple configuration (1x 100%, 2 x 100%, 2 x 50%, 3 x 50% etc.) can be offered for the Pressure Regulating System. Each stream is equipped with a pressure control valve/active pressure regulator/monitor pressure regulator and slam shut valve. A pressure transmitter which feedback downstream pressure reading to pressure controller logic can be supplied.

The HIPPS is provided for protection of downstream facilities from over pressure. If the pressure reading from 2oo3 pressure transmitters at HIPPS skid is above the set point, the HIPPS will activate the closure of two HIPPS valves in order to cut the gas supply to the downstream. The SIL-3 rated process safety system shall be provided for HIPPS.