SciAps, Inc. products

The Z-902 + features an all-new ergonomic design, a 0.5 lb. weight reduction down to about 3.5 lbs. (1.6 kg), improved heat dissipation, and completely updated software and processing electronics. The Z-902 + can use on-board argon purge for high precision analysis or QuickSort for rapid material sorting or grade identification with air-burn. Depending on the element, the LIBS signal is 2x-10x higher when operating in argon purge versus air-burn. The analyzer uses two spectrometers to extend the  wavelength range to 190 – 620 nm. The instrument is factory calibrated for a suite of 15-20 elements, depending on application. Or operators may use the accompanying Profile Builder software package to customize to specific elements, their own calibration standards, and spectral processing.  The Z-902 + can be set up to measure the emissions of any element. Common factory-calibrated Z-902 + applications include alloy and aluminum.

The Z-903 measures every element in the periodic table of the elements – from H to U. It uses the same powerful laser as SciAps other Z-900 models, but with an extended spectrometer range from 190 nm out to 950 nm. The extended range allows emission lines from elements H, F, N, O, Br, Cl, Rb, Cs and S to be measured. These lines cannot be measured with the other Z-900 series analyzers. There are other benefits to the extended range. For example, it measures a more sensitive line for lithium near 675 nm to achieve limits of detection in the 2-5 ppm range. It also measures a more sensitive, and interference-free line for potassium (K). The more traditional potassium lines have heavy iron interference, whereas the line used by the Z-903 is free of such interference. In use globally for mineral exploration including lithium in hard rock and brines. It is also used in forensics, authentication, archeology, and oil/gas exploration due to the wide elemental range.

The X-505 is harmony of performance, ergonomics, and price. It is the smallest, lightest weight handheld X-ray analyzer ever made. In terms of speed, it is second only to the X-550. Weighing in at 2.8 lbs. with the battery, it delivers the small size, blazing speed and high precision of the SciAps X-Series in a perfectly balanced device. It’s fast on all alloys, including aluminums. With its state-of-the-art design and excellent heat handling, the X-505 can run all day long, even in the hottest climates, without requiring down time due to overheating.

Premium performance begins with the most advanced handheld XRF technology available, led by a 55 kV X-ray tube for extra low detection limits on key elements like Ag, Cd, Sn, Sb, and Ba. Up to three automated beam settings provide optimal performance across the entire periodic table from Mg to U. All in a rugged instrument with state-of-the-art software and outstanding thermal dissipation.

X-550 Pb Analyzer delivers the first non-isotope handheld XRF with accepted PCS at three action levels for HUD lead paint assessments. It employs an X-ray tube that uses an electric current under high voltage to produce X-rays. The latest X-ray tube and detector technology deliver the fastest and most accurate lead paint results. X-ray eliminates radioactive isotopes. No isotope replacement costs, isotope disposal costs, or regulatory and financial burden for owning and tracking radioactive materials. The PCS data set demonstrates the instrument’s ability to accurately identify samples as positive or negative according to the federal action level for residential lead paint, which is 1.0 milligrams of lead per square centimeter. The X-550 Pb also has accepted PCS at action limits of 0.7 mg/cm2 and 0.5 mg/cm2. According to the PCS, SciAps X-550 Pb delivered no false positives, no false negatives, and no inconclusive tests, even at the 0.5 mg/cm2 level (Rh anode).

The Z-9 Liquidator Test Station is the first portable LIBS powered Lithium Brines analyzer. Combined with the Z-903 handheld LIBS, the Z-9 Liquidator provides fast and easy analysis of brines in the field or in the lab. This groundbreaking technique only needs a 1-2 mL of sample per test, with no dilution necessary. The Z-9 Liquidator samples the liquid and atomizes it into a fine mist which is then analyzed by the Z-903 LIBS. Within seconds, the concentration of Li and other key elements are displayed on nearby tablet or PC. With SciAps Profile Builder software, users can also develop a custom calibration to further optimize performance or use the factory-built lithium brines calibration programmed in the Z-903 for accurate fast results. Calibrations are also available for pegmatite, Nevada clays, etc. Simultaneously measures Li plus B, Na, Mg, K, Ca and more.