Senect GmbH & Co. KG products

The SENECT Oxygen Sensor O2S measures the concentration of dissolved oxygen in water reliable with a minimum of maintenance. Based on the principle of optical luminescence quenching, the sensor inspires with accurate and long-term stable measurements and does not depend on flow.

The SENECT pH Sensor XR1 measures the pH value of water reliable and precise. The proven and well established principle of electrochemical measurements with electrodes is used by the XR1 to deliver accurate results with simple maintenance and calibration. Another advantage of the XR1: due to its plug connector, the electrodes can be easily and cost-effective replaced. The pH Sensor XR1 is suitable for many applications. It is used in fresh- and seawater monitoring and pH controlling applications in aquaculture and science.

The SENECT ORP Sensor XT1 measures the redox potential of water reliable and precise. The proven and well established principle of electrochemical measurements with electrodes is used by the XT1 to deliver accurate results with simple maintenance and calibration. Another advantage of the XT1: with its BNC plug, the electrode can be easily and cost-effectively replaced. The ORP Sensor XT1 is suitable for many applications. It is used in fresh- and seawater applications in aquaculture and science for example for the control of denitrification filter or for ozone dosing.

The SENECT Solennoid Valve Oxygen M7 is the ideal actuator for oxygenation systems. It´s "normally open" configuration allos a continuous oxygen supply, even if there is a power-shortage or black out. The valve is delivered specially cleaned and with two hoses. If desired, it can be delivered already mountet to the Flow Regulator DY112.

The SENECT valve M12 is designed for the use in the water supply line. It main function is to refill water to compensate for losses. Due to its brass body, the solenoid valve can be operated with a pressure of up to 12 bar.

Maximising output power - switching 230 V AC consumers with the Power Switch SC 24-230. The SENECT Power Switch 24-230 can be used to switch 230 V consumers on and off via the 24 V actuator output ports of SENECT control units. This enables for example the use of 230 V oxygen generators with the SENECT|ONE or to maximise the functionality of the AQUACULTURE|CONTROL to switch up to eight 230 V consumers.

Maximizing oxygenation efficiency - ultra fine micro-bubbles produced with the ECD ceramic diffusors. The diffusor ECD200 and the larger ECD400 are specially designed to maximise the oxygen transfer efficiency in aquaculture. This maximization in turn reduces the operation costs for aeration, oxygenation or ozone dosing.