SGS Aqua Technologies GmbH products

The entry aid is made of corrosion-resistant stainless steel. The support of the access aid is fastened to the building wall with three drive-in anchors. The holder is available in three different wall distances. This allows a wide range of installation options. The holding tube has a total length of 1.50 m and provides a secure hold when entering. After completion, the entry aid is pickled and passivated in an immersion bath.

The system railing is made of corrosion-resistant stainless steel. The special feature is the continuous handrail to which the posts are attached from below by means of a screw connection. This connection can be made at any point on the railing. The knee rail is pushed through the side of the post. Stainless steel joints are used at height offsets and corners, which are fixed in the pipe ends. The posts are anchored to the ground by means of a base plate or doweled to the side of a wall.

The access ladder is made of corrosion-resistant stainless steel. The rungs, which are equipped with cranked punches for safe tread, are welded to the side rails. Adjustable or rigid wall and floor brackets are bolted to the ladder rail. For lengths over 4 m, appropriate connecting elements are used. After completion, the ladder is pickled and passivated in an immersion bath.