SunPumps, Inc. products

Sun Pumps PCA series BLS pump controllers are high quality, micro-processor controlled sensorless brushless DC motor driver and power converter for a solar powered sensorless brushless DC motor. The main purpose of a PCA-BLS series controller is for motor communation and to maximize the total daily water delivery while providing protection for the pump as well as the power source. Shipping Weight: 6.00 lbs.

Sunpumps PCA series BLS pump controllers are high quality, micro-processor controlled sensorless brushless DC motor driver and power converter for a solar powered sensorless brushless DC submersible motor. The main purpose of a PCA-BLS series controller is for motor communation and to maximize the total daily water delivery while providing protection for the pump as well as the power source. Shipping Weight: 4.60 lbs.

Max Load Power: 150 watts, Max Load Current: 5 amps, Max Open Circuit Voltage: 45 volts, Max Regulated Output Voltage : 30. Sun Pumps PCA series pump controllers are high quality, micro-processor controlled DC power converters designed as the interface between a DC powered pump and the power source. Shipping Weight: 2.00 lbs.

Helical Solar Submersible Pump, 10 GPM, 525 FT Head, 120-400 VDC or 120-265 VAC, Brushless Motor. The positive displacement Helical Rotor (HR) AC-DC pumps can be powered by AC or DC power ranging from 120-400 VDC or 120-265 VAC. You can connect your HR pump to solar panels, a generator, wind turbine or grid power. The HR pumps are constructed out of durable 304 stainless steel providing a long-life pump to run for years. They are perfect for remote locations or domestic installations. With built-in Maximum Power Point Tracking (MPP), the flow of water will be maximized to the available solar power through your solar day. Protections against overloads, surges and dry running are all integrated into the onboard inverter.

Helical Solar Submersible Pump, 12 GPM, 200 FT Head, 90-190 VDC, Brushless Motor. HR DC pumps (Helical Rotor) have been developed to meet the low cost pumping system needs without sacrificing quality, reliability or performance. Operational voltages ranging from 90-190 VDC. The HR pumps are constructed out of durable 304 stainless steel providing a long life pump. They are perfect for remote locations or domestic installations. With built-in Maximum Power Point Tracking (MPP), the flow of water will be maximized to the available solar power through your solar day. Protections against overloads, surges and dry running are all integrated into the onboard inverter.

SunPumps SCS series submersible pump motors incorporate the latest in high efficiency, permanent magnet, sensorless brushless DC technology. The motor windings are epoxy sealed and there are no electronics inside the motor thus eliminating the possibility of water damaging the controller. The motors are constructed of corrosion resistant, 304 and 316 stainless steel with a standard submersible NEMA 4` end bell adapter. There are many models to choose from starting a 1/2 HP 24 VDC up to a 3.5 HP 240 VDC. The motors require a SunPumps PCA or PCC Sensorless Brushless DC Controller. These conrollers incorporate the latest state of the art technology. They are micro-processor based and have MPPT, Maximum Power Point Tracking to keep the solar array operating at peak efficiency point at all times. The control box is powder coated, die-cast aluminum with an extra large heat sink and rated for outdoor use.

SunPumps SCS series submersible pump motors incorporate the latest in high efficiency, permanent magnet, sensorless brushless DC technology. The motor windings are epoxy sealed and there are no electronics inside the motor thus eliminating the possibility of water damaging the controller. The motors are constructed of corrosion resistant, 304 and 316 stainless steel with a standard submersible NEMA 4` end bell adapter. There are many models to choose from starting a 3/4 HP 60 VDC up to a 3.5 HP 240 VDC. The motors require a SunPumps PCA or PCC Sensorless Brushless DC Controller. These conrollers incorporate the latest state of the art technology. They are micro-processor based and have MPPT, Maximum Power Point Tracking to keep the solar array operating at peak efficiency point at all times. The control box is powder coated, die-cast aluminum with an extra large heat sink and rated for outdoor use.

SunPumps SCB series pressure pumps are multi-stage centrifugals designed primarily for boosting pressure from surface water as long as the water supply is at or above the level of the pump. They are ideal pumps for home pressure systems, sprinkler systems or in-line booster pumps.The pumps are made from 316 stainless steel with a Viton shaft seal, designed for normal to highly corrosive water pumping applications. The impellers and diffusers are constructed from FDA compliant, nonmetallic glass filled engineered composite.SunPumps SCB series pumps are designed for use in stand alone water delivery systems. There is no better way to provide water for remote homes, villages, small farms as well as many other needs beyond grid power.

SunPumps SCB series pressure pumps are multi-stage centrifugals designed primarily for boosting pressure from surface water as long as the water supply is at or above the level of the pump. They are ideal pumps for home pressure systems, sprinkler systems or in-line booster pumps.The pumps are made from 316 stainless steel with a Viton shaft seal, designed for normal to highly corrosive water pumping applications. The impellers and diffusers are constructed from FDA compliant, nonmetallic glass filled engineered composite.SunPumps SCB series pumps are designed for use in stand alone water delivery systems. There is no better way to provide water for remote homes, villages, small farms as well as many other needs beyond grid power.

SunPumps SCP series solar powered centrifugal pool pumps with brush type DC motors are the ultimate in performance and reliability. There are two types to choose from, the LC series with a 2” outlet and the LV series with a 2 ½” outlet. SCP series pool pumps will replace almost any AC powered pool pump up to 1.5 HP and because they get their power from the sun, you will never have an electric bill.The SCP series pump are single stage centrifugals constructed from high performance thermoplastic. They are extremely resistant to mineral and algae deposits while providing outstanding strength and durability. For added protection there is a basket strainer incorporated into the suction side of the pump. Simplicity is a key feature of the SCP series pumps. They are simple to install and field servicing is easily accomplished without the use of specialized tools.