Suzhou Jono Environmental Technology Co., Ltd products

Sable and reliable operating system even when dealing with solid wastes.

LINDNER uses air suspension belts for long distance transportation, which reduces the traffic flow around cement kilns and minimizes the impact on the surrounding environment.

This equipment is mainly used for waste feeding. It is used in combination with the subsequent stripper to transport the waste evenly. There should be enough space around the lower part of the conveyor to facilitate maintenance and cleaning. Universal series of large and medium chain belt conveyor is suitable for conveying along horizontal or inclined working section. It has the characteristics of large traction force, large carrying capacity, low energy consumption, good wear-resistance and impact-resistance as well as the ability of continuous discharging. It can operate normally and reliably when encountered with complex materials and harsh environment.

Chain belt conveyor is the combination of chain conveyor and belt conveyor. The conveyor belt is fixed on the connecting plate between the chains and moves with the chains. Transport forms are: horizontal, large inclination, Z-shaped. According to the characteristics of the material, a partition can be installed on the conveyor belt surface to prevent the material sliding.

The equipment changes the discharge point through the rotating mechanism under the condition that the material receiving point is not changed, so as to achieve the purpose of multi-point discharge in different periods and thus to improve space utilization.

It uses the motor to drive the spiral shaft to rotate and push the material to realize the purpose of conveying. Screw conveyor with axis is suitable for non-sticky dry powder and small particulate matter. When the spiral shaft rotates, the gravity of the material and the friction between the material and the groove wall cause the material to move forward along the groove bottom of the conveyor under the push of the blade. Shaft-free spiral feeder is suitable for easily wound materials.

This equipment is used for temporary storage and feeding of the prepared materials. When feeding, the material in the circular bin is transported to the chute through the spiral feeding mechanism in the storage bin, and then enters into the conveying system.

Walking Floor System is used for temporary storage and uniform discharge of all kinds of waste. The hydraulic-driven walking floor at the bottom of the feed bin enables the material in the bin to move uniformly in one direction. A co-rotating metering barrel is arranged at the end of the discharging bin to control the discharging speed. It is made of steel pipe covered by metal sheet and it is equipped with imported Hardox wear-resistant steel plate and Rexroth hydraulic system. Its moving route and frequency are adjustable. The length of the equipment is 40 meters.

The heavy plate chain conveyor uses the chain as the traction power, and the metal plate as the carrier. Heavy plate chain conveyor is suitable for large-size and large-weight materials at the front end.

Solid waste universal conveyor is widely used in coal, metallurgy, electric power, mining, port, chemical industry, light industry, petroleum and machinery industries to transport various bulk materials or articles.With the belt made of cotton canvas, nylon, polyester canvas and steel rope core.it can convey material continuously and stably.