Synspec BV

10 products found

Synspec BV Products

  • GC955 Series

    The Syntech Spectras GC955 systems are the top of our line. Most systems are built as a model 600 or 800. But we have also more systems: the 100, 300, 400 and 500 for emission, workers heakth protection or process control applications. These 4 types are mainly built on order for special customer needs. As they building blocks are standardized this is not especially expensive, below some special characteristics and application fields for these systems.

  • Synspec - Model GC955 Series 400 - Trapping System

    Synspec - Model GC955 Series 400 - Trapping System

    GC955 series 400 has a trapping system running at room temperature and a capillary column in an isothermal oven. It is used as variation of a system 600 if only a few compounds have to be measured. It can work with short cycle times in stable conditions.

  • Synspec - Model GC955 Series 600 - Trapping System

    Synspec - Model GC955 Series 600 - Trapping System

    The GC955 600 is suitable for measurement of hydrocarbons in the ppt to ppb range. It is made for the measurement of hydrocarbons in the boiling point range from 50 oC up to 250 oC. GC955 series 600 has a trapping system running at room temperature and a capillary column in an temperature programmed oven. We produce this model since 1998, for several very important applications. The detector is either a PID, an FID or a combination of both. The...

  • Syntech - Model GC955 Series 800 - Peltier Cooled Trapping System

    Syntech - Model GC955 Series 800 - Peltier Cooled Trapping System

    The Syntech Spectras GC955 800 is suitable for measurement of low boiling hydrocarbons in the ppt to ppb range. It is made for the measurement of hydrocarbons in the boiling point range from -70 oC up to 50 oC. To achieve good separation we choose capillary columns with strong separation capacities, with a stripper pre-column to remove higher boiling hydrocarbons. The detector is either a PID, and FID or a combination of both. GC955 series 800 has a...

  • Alpha Series

  • Synspec Alpha - Model 114 - FID Detector

    Synspec Alpha - Model 114 - FID Detector

    The Alpha 114 is a system that uses a cooled trap to concentrate low boiling hydrocarbons and to separate them from methane. So it does not have a separate column. The detector is an FID detector. The loop size is 2 ml.

  • Synspec Alpha - Model 115 / 116 - Sample Loop and Single Column

    Synspec Alpha - Model 115 / 116 - Sample Loop and Single Column

    The Alpha 115 and 116 are systems with a sample loop and a single column. The column has a special multi-layer packing to enable good separation of Methane from the other hydrocarbons. In backflush mode the hydrocarbons are then analysed as one peak. The loop size is 250 ul or less.

  • Synspec Alpha - Model 401 - Analyzer System

    Synspec Alpha - Model 401 - Analyzer System

    The Alpha 401 has a preconcentration trap at room temperature and an isothermal column. The detection is made with a PID detector. The software of this system is very different from the software of the GC955 400 series that has a similar layout.

  • Syntech - Model WPU - Water Purge Unit for Toxic VOC in Water

    Syntech - Model WPU - Water Purge Unit for Toxic VOC in Water

    A purge and trap unit is now available for the separated individual measurement of volatile organic hydrocarbons in water in combination with the full range of synspec gas chromatography systems. The purge and trap unit has been developed to strip Volatile Organic Compounds with air or nitrogen from water for the continuous qualitative and quantitative determination of up to 40 types of hydrocarbons.