Teledyne CETAC Technologies

34 products found

Teledyne CETAC Technologies Products

  • Automation

    Teledyne CETAC Technologies Automation division emerged in response to the growing requests of customers for automation products that varied in size, speed, and capabilities. CETAC Automation provides immediate solutions to the various challenges typical in laboratory environments with a variety of products and accessories including autodilutors, liquid handling stations, and anti-contamination enclosures.

  • Teledyne CETAC - Model APS-1650 - Automated Sample Prep Station

    Teledyne CETAC - Model APS-1650 - Automated Sample Prep Station

    The APS-1650 Automated Preparation Station prepares off-line sample dilutions with specific intentions for use in the oil analysis industry. Before wear metals samples can be analyzed, they must be prepared by means of a relatively simple dilution (usually by a factor of ten). However, these dilutions are time consuming and carry the potential for human error. The APS 1650 Automated Preparation Station handles this task, freeing laboratory personnel...

  • Teledyne CETAC - Model ASX-110FR - Flowing Rinse Micro Autosampler

    Teledyne CETAC - Model ASX-110FR - Flowing Rinse Micro Autosampler

    The ASX-110FR Flowing Rinse MicroAutosampler features a compact size, integrated protective cover and dual flowing rinse station for handling small volume samples (Space Saving Design: Compact footprint (22.2 cm W x 31.8 cm D) enables placement of the ASX-110FR on a laboratory bench next to the host ICP-MS instrument.

  • Teledyne CETAC - Model ASX-280 - Compact Autosampler

    Teledyne CETAC - Model ASX-280 - Compact Autosampler

    More features and improved performance define the next generation of autosampler from Teledyne CETAC Technologies. The compact ASX-280 Autosampler builds upon the reliability of its predecessors with latest generation electronics, improved accessory interfaces, enhanced pumping capabilities, easier serviceability and a sleek new design! The compact and efficient design of the ASX-280 Two-Rack Autosampler preserves precious laboratory bench space....

  • Teledyne CETAC - Model ASX-560 - Autosampler

    Teledyne CETAC - Model ASX-560 - Autosampler

    More features and improved performance define the next generation of autosampler from Teledyne CETAC Technologies. The ASX-560 Autosampler builds upon the reliability of the ASX-520 with latest generation electronics, improved accessory interfaces, enhanced pumping capabilities, easier serviceability and a sleek new design! The ASX-560 keeps the durable features of the ASX-520 before it, which has proven its worth in tens of thousands of laboratories...

  • Teledyne CETAC - Model ASX-7000 - OEM Autosampler Platform

    Teledyne CETAC - Model ASX-7000 - OEM Autosampler Platform

    The ASX-7000 OEM autosampler was developed to handle the specific requirements of OEM customers needing robust, high-precision automation. The autosamplers of the ASX-7000 platform provide the accuracy needed to operate with 384 micro-titer wells and are able to perform difficult operations such as septum piercing and pick and place operations. The ASX-7000 OEM platform is offered in 4 standard sizes. The platform design allows the height, depth...

  • Teledyne CETAC ASXPRESS - Model Plus - Rapid Sample Introduction System

    Teledyne CETAC ASXPRESS - Model Plus - Rapid Sample Introduction System

    When coupled to a compatible autosampler, the ASXPRESS PLUS Rapid Sample Introduction Accessory minimizes times for sample delivery, stabilization, and washout with ICP-AES or ICP-MS.  The result is increased sample throughput by up to 5 times or more.  In addition, the ASXPRESS® PLUS reduces costs from argon, power, ICP-AES / ICP-MS components, and system...

  • Teledyne CETAC - Model MVX-7100 - µL Workstation

    Teledyne CETAC - Model MVX-7100 - µL Workstation

    Advanced, flexible automation; meeting the challenges and demands of ICP-MS today. The MVX-7100 µL Workstation offers highly consistent, syringe driven, low volume and configurable flow rate sample introduction for quadrupole based, high resolution and multi-collector ICP-MS instrumentation.  This technology opens the door to samples of limited volume and batch analysis of volatile sample types. This technology also offers the...

  • Teledyne CETAC - Model Oils 7400 - Homogenizing Dual Matrix Autosampler

    Teledyne CETAC - Model Oils 7400 - Homogenizing Dual Matrix Autosampler

    Oils testing laboratories are adding more sample types as their industry becomes more complex. The Oils 7400 Homogenizing Autosampler allows two sample matricies to be introduced to an ICP instrument from the same system. Boasting a dual port rinse station fed by two separate peristaltic pumps, it can change between oils and coolants testing on demand. With improved speed, mixing capability and sample drip capture, the Oils 7400...

  • Teledyne CETAC - Model Oils 7600 - Homogenizing Dual Matrix Autosampler

    Teledyne CETAC - Model Oils 7600 - Homogenizing Dual Matrix Autosampler

    Oils testing laboratories are adding more sample types as their industry becomes more complex. The Oils 7600 Homogenizing Autosampler allows two sample matricies to be introduced to an ICP instrument from the same system. Boasting a dual port rinse station fed by two separate peristaltic pumps, it can change between oils and coolants testing on demand. With improved speed, mixing capability and sample drip capture, the Oils 7600...

  • Teledyne CETAC - Model SimPrep - Simple Automated Prep System

    Teledyne CETAC - Model SimPrep - Simple Automated Prep System

    Benefits for the Laboratory; Eliminate inconsistent manual dilutions. Save labor and free up personnel. One dilution system for the whole lab. Simple, spreadsheet-like software. The SimPrep automated sample dilution system does more than just mixing and dispensing; it can automatically create: Spikes, Calibration curves from predefined dilution factors, Serial dilutions, Internal standard additions, 1-to-1 and 1-to-many sample transfers (splitting),...

  • Teledyne CETAC - Model XLR-860 - Extended Rack Autosampler

    Teledyne CETAC - Model XLR-860 - Extended Rack Autosampler

    Double Your Sample Capacity; XLR-860 Extended Rack AutosamplerA complete 8 rack autosampler that holds up to 720 samples and 10 standards, freeing valuable personnel from the task of manual sample manipulation. More features and improved performance define the next generation of autosampler from Teledyne CETAC Technologies. The high capacity XLR-860 Extanded Rack Autosampler builds upon the reliability of its predecessors with latest generation...

  • Laser Ablation

    CETAC Technologies and Photon Machines joined forces back in June 2010 with a view to advance laser ablation technology for elemental analysis, and to offer a full range of products globally. This collaboration brought together the experience in Photon Machines’ design team with the sample introduction expertise of CETAC. This partnership has taken the next natural step and both companies have merged under the Teledyne Instruments banner.  Teledyne Photon Machines, a brand of Tele

  • Teledyne CETAC - Model Analyte Excite - Excimer Laser Ablation System

    Teledyne CETAC - Model Analyte Excite - Excimer Laser Ablation System

    The Analyte Excite offers excimer technology at 193 nm with all the analytical capabilities you require, and a price you can afford. The Excite utilizes a highly developed ATL solid-state switched laser engine and includes the HelEx II Active 2-Volume Ablation Cell. The system delivers finely controlled, flat (homogenized) ablations...

  • Teledyne CETAC - Model Analyte Excite+ - Homogenized Excimer Laser Ablation System

    Teledyne CETAC - Model Analyte Excite+ - Homogenized Excimer Laser Ablation System

    The Analyte Excite+ is the ultimate excimer based laser ablation system. It utilizes the latest, highly developed iteration of ATL’s solid-state switched laser engine and includes the acclaimed HelEx II Active 2-Volume Ablation Cell and its unique adaptive inner cell. The system delivers finely controlled flat (homogenized) ablations with high sensitivity and split-second response for shot-to-shot spatially resolved analyses....

  • Teledyne CETAC - Model Analyte HE - High Energy Excimer Laser Ablation System

    Teledyne CETAC - Model Analyte HE - High Energy Excimer Laser Ablation System

    The Analyte HE offers excimer technology at 193 nm with all the analytical capabilities you require, delivering finely controlled, “homogenized-flat” ablations with high sensitivity and split second response. “Fire-on-the-fly” lasing that is synchronized to the stage motion, combined with fast washout ablation cells, make precision depth profiling of spots, lines and areas possible and enables high spatial resolution...

  • Teledyne CETAC - Model ARIS - Aerosol Rapid Introduction System

    Teledyne CETAC - Model ARIS - Aerosol Rapid Introduction System

    The Aerosol Rapid Introduction System (ARIS) connects a HelEx II laser ablation cell to an ICP-MS instrument with minimal transfer volume. The ARIS delivers the sample directly to the torch without the use of internal valves, providing fast washout. The ARIS kit is a set of components designed to reduce the dead volume inside the cell and up to the torch to fully utilize the performance characteristics of the standard HelEx II cell. The use of thin...

  • Teledyne CETAC - Model CleanShot - Fast Washout Switch

    Teledyne CETAC - Model CleanShot - Fast Washout Switch

    The CleanShot Fast Washout Switch eliminates unnecessary extraction tubing, solenoids and fittings from the laser ablation sample cell to the ICPS torch that reduce aerosol transport efficiency and speed. Aerosol transport losses are a known contributor to fractionation caused in large part by surface area as a function of tube length and tube ID, circuitous paths that particles travel and transitions caused by fittings. Each of these factors...

  • Teledyne CETAC - Model Excite Pharos - Femtosecond Laser Ablation System

    Teledyne CETAC - Model Excite Pharos - Femtosecond Laser Ablation System

    The Excite Pharos is a the most user-friendly femtosecond laser ablation system on the market, featuring a compact, fully sealed and factory aligned laser head that does not need routine adjustment or cleaning. The system can be configured for 1028 nm, 257 nm or 206 nm, or configured for a switchable system if desired. An energy density of 10 J/cm2 (1028nm), 5 J/cm2 (257nm) and 3 J/cm2 (206nm) is achievable, with 0.1% RSD on shot-to-shot...

  • Teledyne CETAC - Model ExiCheck - Gas Exchange Accessory

    Teledyne CETAC - Model ExiCheck - Gas Exchange Accessory

    ExiCheck Gas Exchange AccessoryOver time, excimer gas loses efficacy and the output from an excimer laser head will decrease. Passivation of the laser head extends the useable lifetime of the gas in the laser cavity; however, regular gas exchanges are still necessary. If a gas exchange is missed, passivation is lost and the effective lifetime of the gas fill is reduced. Once missed, it takes significant effort and gas to re-passivate and return to...

  • Teledyne CETAC - Model HelEx II - Tunable Volume /Tunable LA-ICPMS Cell System

    Teledyne CETAC - Model HelEx II - Tunable Volume /Tunable LA-ICPMS Cell System

    One cell for all applications - compatible with all CETAC laser ablation platforms; Capacity, speed and precision are what drive sample cell R&D at Teledyne Photon Machines and define the HelEx II. We took the original HelEx, the industry's most peer reviewed and published cell developed and licensed by the Australian National University, in a new direction and made it better. The design improvements were vetted in Teledyne’s extensive ICP-MS...

  • Teledyne CETAC - Model Iridia - Ultimate Elemental Imaging Laser Ablation System

    Teledyne CETAC - Model Iridia - Ultimate Elemental Imaging Laser Ablation System

    The Iridia is a purpose-built laser ablation system designed for high-speed imaging applications that can take your overnight projects and complete them in minutes. Iridia produces high stability laser energy at higher speeds to make full use of the latest ICP-MS technology. The Cobalt sample cell offers single millisecond analytical performance.

  • Teledyne CETAC - Model LSX-213 G2+ - Laser Ablation System

    Teledyne CETAC - Model LSX-213 G2+ - Laser Ablation System

    The LSX-213 G2+ system features the latest in optical design technology to target areas of interest. Built on the rugged and field proven LSX platform, the Light Engine inside the LSX-213 is a hermetically sealed, MIL-SPEC laser head affording unmatched stability and user serviceability. Coupled with precision mounted optical components on a vibration isolated optical bench, the system can be used on multiple analytical instruments at multiple...

  • Nebulizers

    Teledyne CETAC Technologies offers a comprehensive line of specialized sample introduction accessories for ICP-AES and ICP-MS. These accessories can provide signal enhancement, reduction of spectral interferences, resistance to highly corrosive liquids and the introduction of low-volume samples. Please visit our product pages for more details.

  • Teledyne CETAC - Model Aridus3 - Desolvating Nebulizer System for ICP-MS

    Teledyne CETAC - Model Aridus3 - Desolvating Nebulizer System for ICP-MS

    The Teledyne CETAC Aridus3 Desolvating Nebulizer System is a specialized liquid sample introduction accessory for inductively coupled plasma mass spectrometry (ICP‑MS). The Aridus3 can enhance analyte sensitivity up to 10 times or more and can greatly reduce solvent-based interferences such as oxides and hydrides. 

  • Teledyne CETAC - Model BGX-100 - Blend Gas Accessory

    Teledyne CETAC - Model BGX-100 - Blend Gas Accessory

    The CETAC BGX-100 Blead Gas Accessory can be used to add a low flow of oxygen (10 to 50 mL/min) between the U6000AT+ Ultrasonic Nebulizer / Membrane Desolvator and the host ICP-AES or ICP-MS instrument.  This capability is especially useful for the analysis of organic solvents.

  • Teledyne CETAC - Model DS-5 - Microflow Concentric Nebulizer

    Teledyne CETAC - Model DS-5 - Microflow Concentric Nebulizer

    The CETAC DS-5 Microflow Nebulizer is a specialized device for very low-flow applications (3 to 10 µL/min), including micro-HPLC coupled with ICP-MS. The DS-5 nebulizer kit includes a dedicated low-volume spray chamber which can connect directly via a glass socket to the base of the ICP-MS torch.

  • Autosamplers

    CETAC manufactures OEM autosamplers and liquid handling products for a variety of industries and markets. Our focused OEM solutions can be customized to handle most automated dispensing systems, liquid handling, XYZ samplers and fraction collection and are easily integrated into your existing framework.

  • Teledyne CETAC - Model ASX-500 Series - Random Access Intelligent Autosamplers

    Teledyne CETAC - Model ASX-500 Series - Random Access Intelligent Autosamplers

    The platform that started it all, CETAC Automation responded to customer demand in 1993 and delivered the ASX-500 platform. With well over 15,000 systems strong and growing each year, this has become known as the work horse in many industries and laboratories. The simple design allows for endless operation and unprecedented performance. The ASX-500 platform is highly customizable for a wide range of automation applications, including AA, ICP, ICP-MS,...

  • Teledyne CETAC - Model ASX-520HS - High Speed Intelligent Autosampler

    Teledyne CETAC - Model ASX-520HS - High Speed Intelligent Autosampler

    Building on Past Success: The ASX-520HS keeps all the same features that make CETAC Autosamplers an industry standard: metal-free liquid flow path, on board processor, flexible rack configuration, precision engineering, and unrivaled customer support. Accelerated movement dramatically increases efficiency in large volume sample processing. Automated sample handling time of 300 samples can be performed 2.5 times faster than with a standard autosampler....