Terminal City Iron Works Ltd products

The Terminal City two-inch self-draining stand pipe is a factory assembled unit specifically designed and constructed to take the place of `in-field` component assembled units. The self-draining stand pipe can be supplied with 2 1/2` B.C. Std hose outlet.

The Manual does not deal with specific problems but rather assists you in explaining the problem to those in maintenance who are required to keep the hydrants fire-fighting fit. Terminal City Slide Gate Fire Hydrants are readily serviceable with proper design to give unrestricted maximum flow.

The C71P.AI Hydrant measures pressure, monitors for transient events, captures acoustics for leak detection, and captures water temperature in your water distribution system.

Terminal City`s `Heritage` design Fire Hydrant, the T.C.`H 105 with its fluted barrel and outlet caps is an outgrowth of the Company`s popular C71P compression hydrant and is the result of requests from architects and planners for an exterior design that would fit theme areas, including the City of Dawson and Mayo in the Yukon, the Steveston Fishing Village, Saanich, B.C., Tobiano 6 Mile Ranch. Kamloops, B.C. and Grand Forks, B.C.

Terminal City Iron Works Ltd. manufactures AWWA C153 push-on fittings in sizes 4” to 16” that complement your design criteria. Our ductile iron fittings are produced to ANSI/AWWA standards with protective coatings and linings that meet AWWA C104 and/or C116 specifications. Ask us about joint restraint for these fittings. Contact us for configurations not shown here.

All MEGALUG and related restraint products can be furnished as packaged accessories complete with appropriate restraint, gasket, lubrication, and bolting hardware. For use on water or wastewater pipelines subject to hydrostatic pressure and tested in accordance with either AWWA C600 or ASTM D2774.

All 2000PV and related restraint products can be furnished as packaged accessories complete with appropriate restraint, gasket, lubrication and bolting hardware. For use on water or wastewater pipelines subject to hydrostatic pressure and tested in accordance with either AWWA C600 or ASTM D2774.

Ductile iron pipe bell restraint shall consist of a wedge action restraint ring on the spigot joined to a split ductile iron ring behind the bell. The restraint ring shall have individually actuated wedges that increase their resistance to pull-out as pressure or external forces increase. The restraint ring and its wedging components shall be made of minimum grade 65-45-12 ductile iron conforming to ASTM A536. The wedges shall be heat treated to a minimum hardness of 370 BHN. Torque limiting twist off nuts shall be used to insure proper actuation of the restraining wedges. The split ring shall be made of a minimum grade of 65-45-12 ductile iron conforming to ASTM A536.

Constructed of ASTM A536 ductile iron. For use on water and wastewater pipelines subject to hydrostatic pressure and tested in accordance with either AWWA C600 or ASTM D2774.

For use on water or wastewater pipelines subject to hydrostatic pressure and tested in accordance with either AWWA C600 or ASTM D2774.