Terminal - Slide Gate Fire Hydrant

Type of Hydrant:

• No. 1: 2 - 2 1/2 - inch outlets and a pumper outlet.
• No. 1 - 1: 2 - 2 1/2 - inch outlets and a pumper outlet.
• No. 20: 2 - 2 1/2 - inch outlets.
• No. 20P: 2 - 2 1/2 - inch outlets and a pumper outlet.

Depth of Bury:
The distance from the ground line to the centre line of the inlet connection in inches. Available in increments of 6-inch.

Direction of Operation:
The hydrants are normally supplied to open by rotating the spindle in a counter-clockwise direction.

Operating Spindle Nut:

• Shape and size.
• Pentagon - 1 1/2 - inch from point to flat.
• Square - 1 1/4 - inch from point to flat.
• Three sided - 1 7/16 -inch arc from point to flat.

Thread Specifications:

• The 2 1/2 - inch outside diameter.
• Outlets - Pitch of thread.
• The pumper - Outside diameter in mm.
• Outlet - Pitch of thread.

Inlet Connections:
Size - 6-inch
Style - Mechanical Joint, Push - On, Flanged

• Terminal City Slide Gate Fire Hydrants are readily serviceable with proper design to give unrestricted maximum flow.
• Terminal City Slide Gate Fire Hydrants have all working parts accessible for inspection and servicing.
• Terminal City Slide Gate Fire Hydrants are assembled with all parts manufactured to give interchangeability.
• Terminal City Slide Gate Fire Hydrants are provided with automatic self-draining thus leaving the hydrant completely dry for cold weather conditions. Where normal hydrant drainage is impossible special arrangements can be provided.
• Terminal City Slide Gate Fire Hydrants are designed to prevent contact of the seating surfaces during opening and closing thereby eliminating wear of the seating surfaces.
• Terminal City Slide Gate Fire Hydrants are provided with 2 1/2-inch outlets and operating pentagon manufactured to the British Columbia Fire Hose Thread Specifications (unless otherwise specified).
• Terminal City Slide Gate Fire Hydrants are made in the following styles:

No.1 Hydrant: Constructed with 2 - 2 1/2 -inch outlets and a pumper outlet. The inside diameter of the barrel is 6 3/8 inch.

No. 20 Hydrant: Constructed with 2 - 2 1/2 -inch outlets. The inside diameter of the barrel is 53/4 -inch.

No. 20P Hydrant: Similar to the No. 20 with the addition of a pumper outlet. Material Specifications: AlI cast iron parts are manufactured to ASTMA A-126-B. AlI bronze parts are manufactured to ASTM B-62. Stainless steel for main spindle type 416.

Mild steel to SAE 1020.

When ordering parts for the No. 10 or No. 2 Hydrant, prefix the part numbers with No. 10 or No. 2. – e.g. if ordering a main gate casting specify part No. 2 - 40 or No. 10 - 6.