Ti Thermal Imaging Ltd. services

Certain vessels suffer from a build up of sand deposits inside and it is sometimes difficult to know when to open the vessel and remove the deposits. Thermal imaging provides a quick and easy method of clearly identifying these levels. The survey that we provide is unique in that we offer three very important details: We have the ability to measure where the sand level is on the separator. We offer trending between periodic inspections so that the differences between inspections can be easily tracked. Each report will contain upto 4 of the latest thermographic images taken for that area of the separator. We offer summary reports with our interpretations of sand level onto separator specific drawings so that the process engineers have a clear and quick understanding of the problem.

Using basic thermographic principles it is possible for us to show areas of scale build – up, decreasing pipe wall thicknesses and weld discrepancies.

Where sacrificial anodes/cathodes are used we can quickly and easily detect areas where there may be a break/short in the circuits. The above images were taken at varying distances of the same target. They show an area where the Cathodic titanium mesh is broken and is arcing due to the electrical current passing through. This area is very small at less than 2″ diameter. A short circuit from a break in the Cathodic mesh forms a thermal anomaly visible on the outer concrete layer itself removing the need to strip it all away. Savings on this application can be extremely significant.

Corrosion under Insulation can be extremely harmful within the oil, gas, and petrochemical industries. Tankers and vessels contain highly hazardous liquids and gases that are processed through plant pipelines. This is an exciting area developed in order to assist with the location of likely areas of CUI. Using specific techniques, we can bring to attention areas where CUI is likely to form. We have worked with numerous oil and gas companies providing thermographic solutions for pipeline condition monitoring and in-depth inspections and testing for the integrity of insulated pipelines and vessels are processed through plant pipelines.

The use of a cooled thermal imaging camera with high sensitivity and with specific mechanical filters set to detect gases relevant to the oil and gas industrial sector. See your gas leaks in a thermal image as a still radiometric .jpg or non-radiometric video file. Having worked for a decade supplying the Oil & Gas industry with thermographic solutions we have built up a strong expertise in this sector. We are committed to offer the best service to meet our client’s needs in electrical, mechanical, process and particular sand/sludge level measurement and trending in separators or vessels. We have been involved with developing OGI for one of our leading clients in the oil and gas sector which included supply of equipment and training for a significant number of their leading technical engineers.