Refine by
Companies Equipment & Supplies
114 equipment items found
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VR-41 - Vibrating probe level sensor with pipe extension, 20 to 250V AC/DC, process temp to 176°F (80°C), triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, LED status indicator light. Must add pipe extension. Ordinary ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The 18” shaft with 316 SS paddle is used in most applications. As the material builds up from below, it pushes the paddle, tilting the unit. When the unit reaches a 15 degree tilt, it activates the switch. ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BinMaster’s VRX41 vibrating probe level sensor with pipe extension has been revamped with a bright, built-in LED status indicator to make monitoring levels and plugged chutes easier than ever. The light can easily be seen from afar, appearing as red or green, and changing color based on if material is or is not covering the probe and damping its ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Want more information about what rotary options to order? Get more information in the Rotary Configuration Guide and Rotary Paddle Selection Guide. The BinMaster BMRX-200 rotary level indicator is used in solids and powders to prevent overfills, dry runs, or process shutdowns. It has an onboard PCB and DPDT relays that allow users to set up two switching outputs, such as one to a covered and the ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster PRO Remote 25' 115 VAC Power Pac delivers flexible, dependable point-level detection by allowing the electronics to be mounted remotely—up to 25 feet from the sensing probe. Powered by 115 VAC, it ensures reliable performance across bulk solids, powders, liquids, and slurries. Featuring intuitive “Quick-Set” calibration, adjustable time delay, and PRO-Shield ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Side mount extension for thick bin walls. Side mount the BMRX rotary through thick concrete walls using a 6”, 8”, or 12” extended drive shaft. This extension includes a protective shaft guard with a sealed bearing end to support the shaft and prevent material from packing in the extension and causing false alarms. Consult with a BinMaster expert to configure the ideal rotary for ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The CNCR-230 compact 80 GHz non-contact radar with window display is for distances up to 49 ft (15 M). It installs using a 1.5” threaded NPT or 1.5” threaded straight NPT connection. The enclosure is rated IP66/IP67, Type 4X to protect from dust and water damage. ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
https://binmaster.com/mini-rotary-single-vane-ss-rectangular-paddle-for-8-mm-shaft.html. ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VR-90 - Vibrating probe level sensor with 4.92” buildup resistant round ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
AB-MKR - Airbrator external mounting kit to retrofit air pad rectangular opening. Constructed of zinc-plated carbon ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
3D Level Scanner - M with extended temperature up to 365°F with 7.67” diameter horn, 20-32 VDC, 4-20 mA output, Modbus, and RS-485 communications. Accurate readings of level and volume of stored materials based on a 70º beam angle. Wider beam angle is appropriate for silos up to 45’ in diameter and 200’ tall, and where improved accuracy in smaller silos is required. ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
1” stainless steel NPT female coupler to attach guard pipes ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BinMaster air pads are a cost-effective solution to many material flow problems. They are ideal for finely ground dry materials that tend to pack while in storage and then cling to the walls of the bin. Multiple air pads are installed intermittently along the bin wall and low pressure air is directed along the bin walls to ensure a continuous, even flow of material out of the bin. At just ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster PRO Remote 25' LV 12-24 Power Pac offers maximum flexibility by positioning the electronics up to 25 feet from the sensing probe—ideal for installations in compact or hard-to-access areas. Powered by 12-24 VAC/DC, it features straightforward “Quick-Set” calibration, adjustable time delay to reduce false triggers, and PRO-Shield technology to counter material ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
MR-I-220 - Mini-Rotary 220 VACwith single-vane, stainless steel rectangular paddle, complete with SPDT contacts. This economical and compact mini rotary paddle level indicator is designed for controlling material levels in smaller bins and hoppers where other types of equipment simply won't ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VR-21 - Preconfigured vibrating probe level sensor, 20 to 250V AC/DC, 7.37” insertion length, process temp to 176°F (80°C), triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, LED status indicator light. Ordinary ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BC-GW-100 BinCloud Gateway collects sensor data and sends it to the BinCloud platform on the web. Base unit includes 2 - RS485 ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
1-1/4” stainless steel NPT female coupler to attach guard pipes ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
IECEx/ATEX 3D acoustic level sensor RL - standard with 7.67” diameter horn, 20-32 VDC, 4-20 mA output, Modbus, and RS-485 communications. Determines the average volume of stored materials based on a 15º beam angle in silos up to 14’ diameter and 200’ tall. Unit comes with internal LCD display and 3DVision software. Hazardous location approved for European Union and global ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
1/4” SS NPT female coupler to attach paddle to shaft extensions or shaft extensions ...