WindCom Messtechnik e.K. products

General: Input chanals. 3 x Wind speed, 2 x Wind direction, 3 x Analog Inputs.

General: Input chanals. 3 x Wind speed, 2 x Wind direction, 5 x Analog Inputs.

For wind measurements, for meteorological measurements, for hydrological measurements.

With the GSM modem data Loggers can be connected practically worldwide. If it is possible to check the state of a Wind measuring station any time, New Data reading out and also new configuration of the logger – do not outside offices! The GSM connecting supplemented the servicing on site and extends the service intervals. Malfunctions can be initiated early recognised - and remedial actions immediately. This offers an optimum in data security with minimum service expenditure.

The wind is subject to strong temporal and local fluctuations. Therefore very fundamental meaning if possible reliable Wind measuring is to be determined to the wind energy po

Measurement of Time Series. Determination of Turbulence Intensity. Vertical Wind Profile. Measuring Power Curves. Measurements in Complex Terrain. Wind Farm Development.

The wind transmitter is designed for the measurement of the horizontal component of the wind speed in the field of meteorology and environmental measuring technology, evaluation of on-site wind potential, and measurement of capacity characteristics of wind power systems. The device features optimized characteristics, dynamic behaviour at high turbulence intensities, minimal over-speeding, and low starting values. The measuring value is available as a digital output signal at the output. It can be transmitted to data loggers as well. For winter operation the instrument is equipped with an electronically regulated heating, which guarantees a smooth running of the ball bearings, and prevents the shaft and slot from icing.

The wind transmitter is used the registration of he horizontal component of the wind velocity. The measuring value will be placed at the output as digital. The signal can be given to date logger. The wind transmitter is equipped with an electronically regulated heating system in order to prevent icing of the ball bearings and the outer rotating parts. Power supply unit provides the transmitter and the heating system with current. It is advisable to attach a lightning rod in areas with considerable lightning activity.

The wind sensor measures and transmits the horizontal wind speed. The measured values are available at the output as digital signal to control for instance wind power plant. However, with the resp. design, it can be used as input signal for data loqqers or alike.

The wind transmitter is used the registration of he horizontal component of the wind velocity. The measuring value will be placed at the output as digital. The signal can be given to date logger. The wind transmitter is equipped with an electronically regulated heating system in order to prevent ice and frost from the ball bearings and the outer rotation parts. Power supply unit provides the transmitter and the heating system with current. It is advisable to attach Lightning rot in areas with considerable lightning activity.