AMI-300HP - High Pressure Catalyst Characterization Instrument Brochure

ALTAMIRA INSTRUMENTSThe First Name in Custom Reactor SystemsThe AMI-300HP can be designed with anynumber of pressure and temperature rangesin mind. The AMI-300HP utilizes our proventechnology to perform:Temperature programmed desorption (TPD)Temperature programmedreduction/oxidation (TPR/O)Pulse chemisorptionCatalyst treatmentPulse calibrationDynamic BET (optional)Up to 99 procedures can be linked together back-to-back to provide a completecharacter ization experiment. Routineexperiments can be designed and stored foreasy retrieval. The AMI-300RHP is also able to perform:Temperature programmed reactionexperiments with vaporized liquids (TPRx). AMI-300HP High Pressure Catalyst Characterization InstrumentThe AMI-300HP Based on our successful AMI-300 instrument,the AMI-300HP represents an automatedhigh pressure catalyst characterizationsystem. The AMI-300HP performs dynamichigh pressure temperature-programmedexperiments designed to reach 100 barg(higher pressures available in custominstruments). When integrated with a pump,the AMI-300RHP provides the mostsophisticated and automated characterizationand micro-reactor instrument in the industry. The AMI-300HP is a fully automated,atmospheric and/or high pressure system.Features include:A clamshell furnace capable of 1200°C(reactor type limits max temperature) withramp rates from 1°C to 30°C per minute.High-precision mass flow controllers (MFCs)to ensure TCD baseline stability withchanging temperatures. A heat-traced stainless steel flow-path toalleviate concerns of condensation and toprovide an inert surface. A highly linear Thermal Conductivity Detector(TCD)Options for:Dynamic BETQuartz Reactor, Vacuum ActivationLiquid deliveryInconel, Hastelloy, or other high temperature reactors. Sub-ambient (-100°C) temperaturesHardware and Operation149 Delta Drive, Pittsburgh, PA 15238 • 412-963-6385 (Voice) • 412-963-6485 (Fax)Email: info@altamirainstruments.comVisit our Website: www.altamirainstruments.comALTAMIRA INSTRUMENTSCatalyst charge: 0.1 - 1 g1Temperature range: -100 to 1200°C2Ramp rate: 1 - 30°C/minuteOperating pressure: 100 barg3Gases: 5 MFCs for carrier, treatment, pulse, and TCD gases4Gas flow rates: User defined Reactor types: SS 3165Detector: 4 filament TCD with choice of filament type (W, Au/W)Materials of construction: stainless steelNotes:1 Custom reactors available for increased loading 2 Standard temperature range is 25oC - 650oC, -100oC - 1200oC requires options3 Higher pressure available in custom instruments4 Number of MFCs can change to increase capability or lessen cost5 Other reactor materials are available The AMI-300HP is fully-automated for ease ofuse and reliability. The control portion of the soft-ware controls and regulates all valve positions, temperatures, flow rates, and detector parameters. Data acquisition occurs ata selected rate for optimum performance. Thefront panel screen shows the status of the unit ata glance. This screen provides information on theposition of all valves, type of gas connected to each port, temperatures, and detector signal.The data handling package allows the user to dis-play and integrate signal peaks, calculatechemisorptive parameters, and overlay data.Choice of DetectorsWith the AMI-300HP you can use the standard thermal conductivity detector or choose other detectors of your choice. We supply integratedmass spectrometers that can be used in additionto the TCD. In addition, we can incorporate anydetector that provides an analog output or cancommunicate through Dynamic Data Exchange(DDE).Computer Controland Data AcquisitionSpecifications:Representative DataTPR of 10% Co / 1% Re on Al2O3 at different pressuresOperating Screen - A complete overview of all experimental parameters