Band Clamp Bag Housings BCB Series

HARMSCO®BCB Band Clamp Bag HousingsPaintCoatingsLubricantsProcess Water SolventsGround Water RemediationPlating Solutions Hydraulic FluidsIndustrial Waste Water TreatmentCutting FluidsDesigned with Snap Fit “V” Ring BagBCB Series Bag Housings are designed for a variety of industrial filtration applications where clean effluent is critical. Offered in Extended Area bag sizes to increase contaminant removal and provide longer bag life.Made in USAHARMSCO® Filtration Products304 stainless steel construction, standardBand clamp closure to simplify maintenanceInternal parts are 304 stainless steelDrill in-place legs150 psi (10.3 bar) pressure ratingFlow rates up to 200 gpmAll filter housings hydrostatically testedElectropolished finish, standardPatented Extended Area replacement bags available (approx. 50% more surface area vs. Std. bags)1.5” FNPT or 2” FNPT connections available316 stainless steel perforated basket, standardOptions:316 stainless steelChemical resistant coatingBCB-1 BCB-2Features Applications Commercial GradeHarmsco® BCB Band Clamp Bag Housings Chemical Resistant CoatingHarmsco® filters are available with a 3M fusion bonded epoxy coating for chemical resistance. The coating is NSF Standard 61 Certified. It is applied to all stainless steel surfaces (inside and out), and is far more resistant than 316L stainless steel. Fusion bonded epoxy coating is ideal for sea water applications and when resistance to agressive chemicals is required.A BABCCStandard #1 BagStandard #2 BagBCB-1 BCB-2D DExtended #2 Basket OptionExtended #1 Basket OptionFinish - ElectropolishedInlet/Outlet - 1.5” FNPT or 2” FNPTConstruction - 304 stainless steel, standard; 316 stainless steel and/or chemical resistant coating, optionalClosure - O-ring Housing Seal - Buna-NTemperature - up to 250°F(121°C), housing onlyPressure - Up to 150 psi (10.3 bar)Specifications HARMSCO® Filtration ProductsP.O. Box 14066, North Palm Beach, FL 33408(561) 848-9628 • Toll-free: (800) 327-3248 • Fax: (561) 845-2474 • E-mail: sales@harmsco.com© Harmsco, Inc. 16B 2/11www.harmsco.comMade in USANote: This publication is to be used as a guide. The data within has been obtained from many sources and is considered to be accurate. Harmsco does not assume liability for the accuracy and/or completeness of this data. Changes to the data can be made without notification. Temperature, Pressure, Flow Rates, Differential Pressures, Chemical Combinations and other unknown factors can affect performance in unknown ways. Limited Warranty: Harmsco warrants their products to be free of material and workmanship defects. Determination of suitability of Harmsco products for uses and applications contemplated by Buyer shall be the sole responsibility of Buyer. The end user/installer/buyer shall be liable for the product’s performance and suitability regarding their specific intended applications. End users should perform their own tests to determine suitability for each application.Standard #1 and #2 Bag HousingsOrdering Information FilterModelMax FlowRate*(GPM)Max FlowRate*(LPM)Max FlowRate*(M3/Hr)AHeightBDiameterCHeightDHeightI/OFNPTStandardBag SizeBCB-1-1.5-STD 90 341 20.4 28-1/4” 8” 22-3/4” 4-1/2” 1.5” 1 StdBCB-1-2-STD 90 341 20.4 28-1/4” 8” 22-3/4” 4-1/2” 2” 1 StdBCB-2-1.5-STD 200 757 45.4 42-3/4” 8” 37-1/4” 4-1/2” 1.5” 2 StdBCB-2-2-STD 200 757 45.4 42-3/4” 8” 37-1/4” 4-1/2” 2” 2 StdFilterModelMax FlowRate*(GPM)Max FlowRate*(LPM)Max FlowRate*(M3/Hr)AHeightBDiameterCHeightDHeightI/OFNPTExtendedBag SizeBCB-1-1.5-EXT 90 341 20.4 28-1/4” 8” 22-3/4” 4-1/2” 1.5” 1 ExtBCB-1-2-EXT 90 341 20.4 28-1/4” 8” 22-3/4” 4-1/2” 2” 1 ExtBCB-2-1.5-EXT 200 757 45.4 42-3/4” 8” 37-1/4” 4-1/2” 1.5” 2 ExtBCB-2-2-EXT 200 757 45.4 42-3/4” 8” 37-1/4” 4-1/2” 2” 2 Ext*Flow rates shown above are for guidelines only. Actual flow rates are based on bag type, micron rating, viscosity, solids content and a number of other factors. For complete flow and pressure drop information please refer to your bag manufacture guidelines.Extended #1 and #2 Bag Housings