Blackhawk - USB100v2 JTAG Emulator Brochure

Features Part Number: BH-USB-100v2D ¦ High-Speed USB 2.0 (480Mb/s) Host Interface. ¦ Power Status LED. ¦ Supported Devices: · TMS320C28x High Performance 32-bit controllers · TMS320C54x Power-Efficient DSPs · TMS320C55x Fixed-point DSPs · TMS320C674x High Performance DSPs · TMS320C64x+ High Performance DSPs · ARM 9 · ARM Cortex M3 (not including Stellaris Cortex M3) · ARM Cortex R4 · ARM Cortex A8 ¦ 1.8/3.3 volt device I/O support. ¦ Native 2x10 20-pin cTI JTAG Header ¦ Includes 2x7 14-pin JTAG adapter. ¦ Optional ARM Multi-Ice pin converter available. ¦ Online Support from TI - ·www.tiexpressdsp.com/index.php/XDS100 ABOUT BLACKHAWK EWA Technologies, Inc. is a major global player in the application of the IEEE 1149.x standards (known as boundary-scan or JTAG) to state-of-the-art products that will support the design, prototyping and production of the next generation of complex technology products. EWA Technologies consists of two operating units: the Blackhawk™ division in Mount Laurel, NJ, and Corelis, Inc. in Cerritos, CA. The Blackhawk™ division is a leader in providing hardware and software for the rapid development of digital signal processor-based (DSP) applications for a wide vari-ety of vertical markets. Blackhawk™ is a Texas Instruments® (TI) DSP Third Party provider for development hardware, advanced JTAG controllers, Real-Time Op-erating Systems, design services and consulting. System Requirements ? PC running Windows® 2000, XP, Vista, 7 ? USB port either 1.x or 2.0(preferred) ? CCS v4.x or higher BlackhawBlackhawkk USB100v2USB100v2 XDS100v2 Controller for TIXDS100v2 Controller for TI Embedded ProcessorsEmbedded Processors © 2010 EWA Technologies, Inc. 7/2010 Blackhawk is a registered trademark of EWA Technologies, Inc. Other product names used herein are trademarks of their respective companies. 123 Gaither Drive ? Mt. Laurel, NJ 08054 ? 877123 Gaither Drive ? Mt. Laurel, NJ 08054 ? 877123 Gaither Drive ? Mt. Laurel, NJ 08054 ? 877---983983983---4514 ? www.blackhawk4514 ? www.blackhawk4514 ? www.blackhawk---dsp.comdsp.comdsp.com Blackhawk Blackhawk Blackhawk EmulatorsEmulatorsEmulators ™™ Supported devices: : : TMS320C28x, TMS320C54x, TMS320C28x, TMS320C54x, TMS320C28x, TMS320C54x, TMS320C55x,TMS320C64x+ ,TMS320C674x and ARM® families.TMS320C55x,TMS320C64x+ ,TMS320C674x and ARM® families.TMS320C55x,TMS320C64x+ ,TMS320C674x and ARM® families. The Blackhawk™ USB100v2 Model D is a very low-cost controller for basic debugging of Texas Instruments DSPs. Requiring no external power source, the USB100v2 Model D can support most of the basic features of higher priced con-trollers and requires no additional drivers when installed using CCS v4 or later. As an added bonus, Texas Instru-ments offers Code Composer Studio v4 FREE for use with the USB100v2 Model D. The USB100v2 Model D is a TI XDS100v2-compatible con-troller fully supported under CCS v4 and future Texas In-struments roadmap software development environments. The USB100v2 Model D provides for faster code downloads and assembly code stepping in that the USB100v2 Model D uses a high-speed USB2.0 (480 Mb/s) port instead of slower USB1.x (12 Mb/s) implementations. Measuring just 2.75”L x 0.80”W x 0.65”H (7.0cm x 2.0cm x 1.5cm) the Blackhawk USB100v2 Model D is the smallest and most compact emulation product from a US manufac-turer and is fully assembled and tested in the USA. It will support 1.8-3.3v targets with native cTI compact 20-pin connections and also includes standard 14-pin emulation adapter. Additionally, with an optional 20cTI to 20ARM connector (available from Blackhawk), the USB100v2 Model D can connect to 20-pin ARM Multi-Ice platforms. Blackhawk JTAG Emulators and Controllers are available from a world wide network of industry resellers. Compatible Operating Systems: Windows® 2000, XP, Vista, 7 What’s Included ? USB100v2 JTAG Controller ? 6 foot USB Cable ? 20-pin (cTI) to 2x7 14-pin Adapter ? Quick Start Guide Model D