BoreSaver Ultra C Pro Brochure

DESCRIPTION BoreSaver Ultra C Pro, the factory blended version of BoreSaver Liquid Enhancer and BoreSaver Ultra C, is an enhanced cleaning treatment that completely removes iron oxide deposits found in wells, bores, pipes and pumps. It also maximizes the control of iron bacteria. Ultra C Pro is an enhanced treatment for more severe cases of contamination. It dissolves deposits more effectively, extends treatment times and provides a faster reduction of iron related bacteria. Use of Ultra C Pro improves water supply, increases output and extends the working life of pumping equipment and accessories. Ultra C Pro is safe and easy to use. It can be used without dismantling equipment and will not attack or deteriorate any materials inside the system. TECHNICAL CHARACTERISTICS Ultra C Pro comes in a solid crystal form that is added directly to the well or borehole. It is a proprietary blend of monohydrates and organic acids with bacteriostatic properties based on leading independent research. The key component of Ultra C Pro has been shown to be ten times more effective than other chemicals at removing iron oxide and iron bacteria. Ultra C Pro was developed in Australia by Aquabiotics Industrial. MAIN CHARACTERISTICS Ultra C Pro is added directly to the water system and the amount to use is based on the volume of water. Typical dosage rates are between 20kg and 70kg per cubic metre of water in the well, depending on the severity of the contamination. The Ultra C Pro treatment works directly on the problem, loosening and dissolving the deposits and related contamination. Any of the standard rehabilitation methods are then used, including surging and brushing, air-lifting and pump-in recycling, to safely pump the deposits and contamination away. The ideal cleaning time period is 24 to 48 hours. During the rehabilitation process components of Ultra C Pro are converted to carbon dioxide and water and the residual components are readily biodegraded to harmless inorganic ions and compounds. The frequency of follow up cleaning will be determined by the natural conditions in the system although a regular maintenance programme is recommended. Whilst all iron oxide deposits can be removed, it is not possible to completely eliminate iron related bacteria. However, regular use of Ultra C Pro can control the problem and ensure the well/bore and pumping equipment is working at maximum efficiency for longer periods. Research has shown that effective cleaning with Ultra C Pro prolongs the time between rehabilitation cleans. To ensure the best possible results a Well Rehabilitation Analysis Checklist has been developed which should be completed before use. We recommend the use of a good quality downhole CCTV camera to assess the nature and extent of the contamination. Please refer to our technical department with any queries. Ultra C Pro is available in 5kg, 10kg and 20kg boxes. Ultra C Pro can be used in conjunction with all other BoreSaver treatments. Refer to our technical department for advice. geoquip water solutions limited Unit 7, Sovereign Centre Farthing Road Industrial Estate Ipswich, IP1 5AP, ENGLAND TEL: + 44 (0) 1473 462046 FAX: + 44 (0) 1473 462146 email:info@geoquipservices.co.uk PRODUCT SHEET BORESAVER ULTRA C PRO